Shopping Cart

Your cart is empty.

Your cart is empty.

Sovol Solder Fume Extractor, 100W Suction Smoke Absorber Remover with Air Volume 200m³/h, 3-Stage Filtration, 2 shapes of Smoke Hoods and 3 Exhaust Hoses for Welding Smoke Absorption Soldering

Free shipping on orders over $29.99

$143.99

$ 58 .99 $58.99

In Stock
  • [Super Strong 3 Stage Purification] - Sovol smoke absorber has a 3 stage filter with an air purification rate of up to 99.97%.The first layer of high-density filter will initially trap large particels such as dust and debris, the second layer of High Efficiency H13-Grade HEPA Filter remove at least 99.97% of particles with a size of 0.3 microns (um), the third layer Activated Carbon Filter remove VOCs. The filter replacement kit is available now on Amazon
  • [100W Suction to Remove Smoke and Odor] - 100W power output brings Sovol Fume Extractor excellent absorption capacity. Air volume reaches 200m³/h. The upper cover and the body are sealed with EVA cotton to prevent smoke leakage, increase the effect, and reduce vibration noise. We also upgrade the Odor removal function of this Fume Extractor. It can greatly reduce the smell of the filtered gas
  • [Two-in-one Exhaust Hose Adapter] - φ80mm and φ100mm universal adapter can be adapted to a wider range of exhaust hoses and air outlets of more equipments. The built-in smoke absorber hose can change direction 360 degrees at will. It can be stretched and compressed. Bend the tube to the direction of your project, regardless of which direction you are working on. The Fume Extractor also comes with extra 2 soft exhaust pipes ( φ80mm and φ100mm ) help you to fit for more equipments
  • [Dual-specification Smoke Hoods] - Square and round smoke hoods can be used in a wider range of scenarios. Sovol Fume Extractor is Applicable to most laser engraving machines, closed laser engraving machines, laser protective covers, closed 3D printers, 3D printer insulation covers, light-curing printers, etc. on the market, and can also be used in nails beauty, moxibustion beauty, manual soldering
  • [Silicone Foot Pad and Handle Design] - The soft silicone foot pad can make the machine more stable and not easy to slide, and it will also reduce the noise generated by the vibration of the machine and the contact surface; the handle is located at the top, which can move the machine more conveniently
  • [Filter cleaning and filter replacement frequency] - Pre filter should be replaced once per 1 month, HEPA filter and activated carbon filter should be replaced once per 1-3 months. If there is a lot of dust or large particles in the environment, it is recommended that you clean the pre filter once before each use; when the machine sounds an alarm, it is recommended that you clean the pre filter as soon as possible to prevent the filter from being blocked, which may cause the fan to burn out due to high temperature



Product Description

Related Products

What‘s in the box?

  • 5 pcs pre-filters and 1 * HEPA filter and activated carbon filter (2 in 1)

What‘s in the box?

A machine with 3 Exhaust Hoses

What‘s in the box?

A Smoker Remover Fan

Compatibility

Fits for Sovol Fume Extractor 100W

Compatibility

Fits for Comgrow Laser Engrave Enclosure. Also you can use it individually.

Compatibility

Fits for Comgrow Laser Engrave Enclosure (Large and Medium Size)

2
6
7
8
9

In order to achieve the best filtering effect...

2

Use this purifier in a completely open space

  • Please use the Exhaust Hose we provide. The Exhaust Hose can make the smoke removal location closer to the smoke generation area to achieve a more efficient smoke removal effect.
3

Use this purifier in a small enclosed space

  • Please wait a few minutes before opening the protective cover once completing the purifying process, so that the smoke and odor removal effect will be better (different enclosed volumes require different smoke removal times).
4
5
10

G Johll
2025-09-05 09:33:00
This is a very affordable and good solution for a small shop. The machine comes with a variety of connectors that should work in about any situation. I connected mine to an MDF enclosure I built for my laser engraver.The metal case makes this a sturdy machine It has a dial to adjust the cfm and is reasonably quiet for the amount of air it's moving, even when set on high.There are some reviews here knocking the filters. Mine came with 3 different filters pre-installed and an additional 4 top/large particulate filters. The other 2 are easily available online even if Sovol doesn't provide them. The other filters have tabs and are easily replaced when time comes. IMO, filters aren't an issue.I'm looking forward to not pumping the warm air out of my shop this winter.
Aaron buhmann
2025-08-15 17:12:17
⭐⭐⭐⭐⭐ Absolutely Fantastic! A Must-Have!I couldn’t be happier with this purchase! From the moment I received it, I was blown away by the quality, functionality, and attention to detail. This product exceeded my expectations in every way!The design is sleek and modern, making it not only practical but also aesthetically pleasing. It’s clear that a lot of thought went into crafting something that is both durable and efficient. It works flawlessly, and I appreciate the ease of use—it’s truly a game-changer!What really stands out is the value you get for the price. Comparable products don’t even come close in terms of quality and performance. I’ve already recommended it to friends and family, and I’m considering getting another one as a gift.If you’re on the fence, just go for it—you won’t regret it!
Gloria
2025-08-03 14:39:20
I'm not unhappy withn the machine ,the machine does what it's intended to do, I am however very disappointed that a ser of filters for this machine cost a 1/4 of what the machine cost.That's gonna be bookoo $$ over the life span of this machine. I'm in my 3rd month and now needing to change the filters at $50 .
Alex Monroy
2025-07-07 11:15:10
Before buying this fume extractor I did a lot of research and I compared it to many other brands within the same price range. I use it almost every other day and so far it works extremely well and I am very happy and pleased with my purchase. I also recently had to contact customer service and I was somewhat skeptical at first about them getting back to me since there is no live person to talk to. After completing the online form and submitting it for a call back, to my surprise I was contacted by their after-sales service department. They were extremely helpful from beginning to end. They stayed in constant contact through email until my problem was resolved. Not only did I purchase I great product but also a peace of mine that if something goes wrong I can certainly trust this company and their after-sales service team to get it resolved.
Kindle Customer
2025-04-02 15:57:06
I use mine with a PVC dust collection hose for longer range. I have that taped to a crappy smoke extractor lamp for support (3-in-1 Solder Fume Extractor Smoke Absorber Remover with 26in Adjustable Arm, 3 Carbon Filters, Soldering Fan Lamp with 3 Colors 10 Brightness for PCB Repairing ESD DIY Working Soldering Desoldering). I use it to collect smoke from my bong to keep my room smelling nice.Since I use it so little the filter will last a long time, but I haven't been able to find replacement filters anywhere. The Sovol website doesn't even have them. What am I supposed to do when they wear out?
WRONG17
2024-12-05 11:20:14
The media could not be loaded.
dawn miller
2024-12-04 18:15:42
Company should sell replacement filters and doesn’t keep saying soon on Amazon, so until then machine is useless DO NOT BUY ! Used for a month changed top filter 3 times but no way to change the others . Maybe Amazon needs to make sure before they sell crap!!
Recommended Products

$29.97

$ 14 .99 $14.99

4.6
Select Option