Your cart is empty.
Your cart is empty.Product Description
Shy H.
September 3, 2025
Absolutely wonderful. These are super easy to install, coming in 4 pieces that can slide and fit together and slot into the smallest crevice or you can bend the stabilizers to better fit in larger spaces. They can be nearly as short or long as you need. Great value, one of the cheaper options I found and they have solved all of my stovetop cleaning problems.
Julie
August 7, 2025
Great product but these are black, not stainless steel.
Angela Waters
July 18, 2025
I love these. They are a perfect fit and with a black stove they blend in completely. They fit securely, go all the way to the wall, stay in place, and are easy to wipe clean.(I had a set of rubber ones before that I hated.)
Greg
July 3, 2025
Nicely adjustable length flat black stainless steel edge covers are strong and have adjustable clips. Since they are made of metal, they can handle hot oil spills without burning or getting disfigured. The covers fill the gaps between the counter top and your stove, but you do need a minimum of 2mm of gap to fit the width of the cover tabs. The depth can vary from stove coverage from 14" to 27.5" for the part of the counter that is exposed to the stove edges.Our stove "hole" is a bit tight, and it's just barely has the 2mm gap on each side, so its a tight fit. The cover has right angle, so the cover only covers the counter side, and no coverage on the stove side. I could have used a little bit of lip on the stove side to prevent spills on the stove side of the gap. However, it is a tight and only liquids will get between the stove and the counter.
Ms. Helen
June 22, 2025
I love the quality of these and the fact that they are adjustable is awesme
Rs
June 8, 2025
Love these. Perfect adjustable fit.
Sharon
May 8, 2025
Needed a gap filler such as this as I took delivery of a new range that didn't fit exactly the same footprint as the old and new kitchen cabinets had been built around the former range so there was an ugly strip on each side of the range that was exposed cement board that tile is laid on that needed to be covered. Now, because it is a Luxury waterfront home in the Florida Keys I wanted the best "look" I could get so I ordered 4 gap filler kits (total less than $100 which I was willing to do as the kitchen in the home is a premium selling feature) because I wanted to be certain I could compare and use what was best for my needs. This Kit was very nice, but like most others it had two pieces channeled at the top that could expand to the length needed, which left an overlapping metal seam of sorts along the side of the cooktop that could catch food stuffs and otherwise possibly create a challenge to keep clean Some of the kits had the gap portion near 1", others more like 3/4", the latter which I favored as looking better in my application. Yes, my objective with more than one kit is that I wanted to be able to compare the looks and choose the best for my application. These are stainless steel painted flat black so the look was what I wanted I just didn't like the seam from the expanding pieces and one of the 4 I ordered was 1-piece, aluminum, so they could be cut to length with a jig saw or cutters and that is what I ended up choosing These would be perfect for many applications and are absolutely functional and do exactly as advertised. I just preferred the one piece option and needed to spend a little more to compare so what I ended up with was the best for my gorgeous kitchen which happened to unfortunately not be this set.
One4
May 7, 2025
This fits well, looks good, and functions as expected. The quality is great, and as described, it appears to be powder-coated stainless steel, heat resistant, and is adjustable.The big issue with covering the gap is that most counter tops and stove tops are not level with each other. Sometimes the stove top is higher, and sometimes the counter top is higher. Therefore, to completely cover the gap for all circumstances, a designer/manufacturer is faced with an impossible task; compromises must be made; one size will not fit all.Over the years, I've purchased, and in one home even fabricated, many different gap covers. This one is one of the best length-adjustable I've seen thus far. The remaining gap, once this cover is properly installed is very thin. So, what can be done? Silicone. Get a small tube of clear or black (or whatever color you'd like), 100% silicone sealant, several paper towels (or a clean, dry lint-free rag), and run a thin, small bead of silicone down the remaining thin gap. Use a finger tip to gently press the silicone slightly down into the gap, and then the paper towels/rag to wipe/clean up any excess silicone. It will wipe off easily within the first 5 minutes. Let the silicone cure for at least 12 hours, preferably 24, before using your stove top. Done. The beauty of doing this is that you can still remove these covers, if needed. Filling the thin gap with silicone is semi-permanent, and not a permanent installation. (Warning: if you do remove a cover after using silicone, you'll likely need to remove the old silicone before reinstalling the cover and applying silicone again. You should be able to rub most, if not all, of the old silicone off with your fingers; a plastic razor blade scraper may come in handy.)Again, this design is one of, if not THE, best adjustable length gap fillers I've seen. From an aesthetics standpoint, a fixed length cover will look nicer, but you'll need to trim such to size, and it will likely be more expensive. This one is a great buy, and works very well.
Crazy Craze
April 23, 2025
I really liked this. It did a great job of covering the gap between the stove and the cabinetry really well and actually holds in place quite nicely. Personally, I've never found moving the oven out for cleaning to be terribly difficult but I just prefer the cleaner gap-free look.
PC
April 17, 2025
I got this to cover the gaps between the stove and counter where a lot of stuff falls and is pretty difficult to clean.Was using silicon ones earlier which although were working fine, but were very thin and would be a reason for worry around hot stuff. These being metal solves that issue for sure and the locks ensure that it stays in place.It good quality material and resolves my issue of burning risk. But, it does not fit as well as the silicon one did. Its not even as versatile to handle the variation in gap on either side. It stays raised more than the silicon one which does not look as good.Overall, its a good quality product but could have been better designed to improve functionality.
NW
February 22, 2025
When we moved in and I did deep cleaning of the house and moved the the stove out O M G 🤢 so much caked on crumbs on side of stove and cupboard and and ground 🤮 it was so bad so after that horrific experience I was mindful of the gap and tried to avoid that same issue from previous owner, but at times accidents would happen…so when I saw this I thought worth a try & omg is it perfect; perfect seals up that gap and it’s not an issue anymore & I love this Matt black finish because not only are all out pulls black but also out counter top and the top of stove (even though the front us stainless steel) I initially tried a stainless steel finish and it stood out more, but with this it is now seamless look 👌🽠very happy with it
Sammy
February 3, 2025
I recently got a new stove and there was a fairly substantial 5 cm gap in between the granite countertop and the stove, which meant that food particles would fall into the gap and end up on the floor. I was looking for a gap filler and found this one. I liked the fact that it was made of black stainless steel and not silicone, I thought this would make for a better, more aesthetically pleasing look, especially since my stove is made of stainless steel with black trim. This gap filler from Acpulse came with instructions on how to install it (small/large support tabs), however I could not for the life of me figure out how the support tabs worked. So I just extended the filler and slid it into the gap (without using any of the tabs). The length of the cover is perfect as it extends to whatever length you need. I must say that it looks very nice and streamlined. However the design could use some improvement since there is still a gap of a few millimetres between the stove and the countertop, since this cover does not overlap the stove as well as the countertop as some other fillers do. It just slides into the gap, making it smaller but the gap is still there and tiny particles of food can still slip through. If you are looking for something that fills the gap completely, maybe look for a silicone gap filler that overlaps onto the stove as well as the countertop.
YYCFam
November 22, 2024
This gap filler works great to stop food and debris from falling between your stove and counter. The steel makes it sturdy and easy to clean and I like it better than silicone alternatives. To use, you simply extend the product to the correct length and pus out the tabs to stabilize the product. This item is simple to use and looks great once installed. Definitely worth considering to give a clean and "framed" look to your stove and counter top.
Recommended Products