Your cart is empty.
Your cart is empty.STANDARD IGN Standard Motor Products EFL1 Relay
Palotti Gyrutti
2025-07-09 14:53:31
Used on a '65 Mustang with LED front and rear signal lights. This flasher required load resistors to work with LED's (without one it wouldn't flash and the lights wouldn't operate). Once I got the load resistors in place it worked beautifully; flash frequency is pretty brisk about twice per second with a nice, regular rhythm; as soon as you activate the turn signal it flashes immediately and turns off instantaneously when turn signal is deactivated; makes a nice fairly loud clicking sound, which I prefer since the car has a pretty loud exhaust (built 289 with a 2.5" exhaust).
Gino
2025-07-06 10:09:59
When I installed LED lighting in my 1970 Mustang the mechanical flasher units had a hard time and often would act as if the bulbs were burned-out -- they would give a steady on rather than flash. I replaced them with two of these electronic units (one for the hazards and one for the turn signals) and they work like a charm, giving a nice, strong steady and evenly timed flashing! I also have a good sentimental feeling having them in my car as my father was a parts designer for Standard Motor Products in the 1970's and 1980's!
D. F. Clayton
2025-05-30 15:51:43
The media could not be loaded.
Brian J.
2025-05-28 18:45:00
Ordered from Amazon as I needed it asap and they did there job. had it in my hands in 2 days.
Jeffrey Howe
2025-05-21 10:32:25
Fits great, just will not function with only LED lights. Must have incandescent bulbs on the same circuit.
Robert
2025-05-08 14:32:43
Works great but does have a different sound than the original
Marco de Vries
2025-02-17 18:34:40
Fixed my bulb to LED conversion and somehow also fixed a ground issue I had in tail lights. Nice steady flash with clear sound. Very happy.
Will Tutt
2025-01-17 16:24:21
Installed in a 1967 Pontiac GTO. Works great.
Recommended Products
