Your cart is empty.
Your cart is empty.Product Description
High Temperature Resistance Fiberglass Gasket Tape For Stoves& Fireplaces
Our high temperature resistance fiberglass Flat gasket tape are mainly used to stick on the door glass frame of stoves and fireplaces to act as a buffer to protect the glass from being crushed by other objects, at the meantime, it seals the glass to prevent smoke get out from the stove or fireplace combustion chamber. You can also use it to seal the stove or fireplace door or ash pan to prevent the leakage of smoke and ash. Our products have been used for many years on stoves or fireplaces of various brands and models, can fully meet the requirements of various of stoves and fireplaces.
THE GENERAL INFORMATION
Self-Adhesive High Temperature Resistance Gasket Tape
Since there is high temperature resistant glue on the back of the gasket tape, so after removing the release paper on the back, you can directly stick it to the glass or other projects without using additional glue or silicone cement, so it is very convenient for home owners to install. The gasket detail information listed as below:
- Gasket Material: Fiberglass
- Gasket Max. Temperature: 1100F
- Gasket Color: Grey
- Glue Max. Temperature: 650F (As the glue hide under the gasket and far from fire, so the temperature around the glue is low and it won't be burnt)
THE SIZE AND SHAPE
- Total Thickness: 1/8"
- Total Width: 1"
- Glue Area Width: 1"
Available/ Unavailable Implement
Wood Stoves
Fireplaces
Pellet Stoves
BBQ Grills (Unavailable)
Stove Flat Gasket Tape Function:
Protect your stove& fireplace door glasses from been damaged.
Prevent the smoke get out the combustor chamber and keep your room safety and clean.
Prevent ash leak from combustor chamber or ash pan to ensure your room is clean.
carolyn c.
2025-08-28 10:20:38
This flat gasket is a tight weave fiberglass that works well. Easy to install because of self adhesive.
pbo
2025-08-15 14:54:34
Nice item. Works great for what I needed it for.
Jphelps
2025-08-11 13:35:17
I replaced the seal around the door but the fire was still burning too fast/hot in our wood insert. I pulled the door and inspected around the glass. The seal looked rather flat and likely needed to be replace...yep it was toast.I wasn't 100% sure this was the right stuff to use, but affordable enough to give it a go. Being 1 inch wide I started on the edge of the glass then folded over on the front and back. The tape is sticky and 'burns' in place, although we had a couple spots on the inside of the glass that did not attach perfectly.However the edge and exterior of the glass sealed perfectly. With the exterior and edges now sealed, my fire burns nice and slow, and I would say we are nearly doubling our burn times for wood. Love that low slow burn heat it gives off (cats love it too). I can add a couple of logs at bed time and wake up to a warm house in the morning.
Dylan
2025-07-11 14:38:44
So far so good. Came undamaged and was easy to install. The 3m tape was easy too use. I have not had a fire yet so I can not say how the adhesive holds up long term. I also cleaned the surface with rubbing alcohol a day prior. I choose to stick it to the fire place itself because my door edge was too skinny and I figured it would stick and last longer if it had a flat surface that was wider than the glue strip. It will get hotter than the door so hopefully the glue holds. The glue is rated to 600°f and I just have a pellet stove that never gets above 300°f so we'll below the rating. So, technically it should be fine. If not I have some high heat gasket maker I can use as glue or buy some cement. But if I have to buy cement I want my money back because I should have just gotten the kit with it to begin with.
Kowalczyk
2025-04-19 17:01:11
Worked great on my smoker, nice tight seal due to the thickness.
Steve
2025-04-15 15:27:24
Worked perfectly!
Ali
2025-04-01 10:48:32
I used that to seal my Fire place Door some times we see smoke coming out, it did the job no more smoke in the room very good thickness sealed the door value for money very good Quality!
K of Vt
2025-03-28 16:10:33
The tape needs more fireplace glue to work.
Bonnie U
2025-03-19 13:36:26
The 3m tape was extremely efficient to put on the replaced wood stove gasket. The best part is it fit the door for wood and the door for ashes! Worked extremely well!
Line Chartrand
2025-03-04 16:23:24
Bonne mesure. Parfait pour mes portes de combustion lente.
Jamie Canning
2025-03-03 15:33:03
Used as a secondary door seal on my pellet stove
Artful Dodger
2025-02-25 15:27:16
I used the 1/4 inch thick gasket, the backing was branded 3M, package was unbranded. After years of fighting with the braided style - the glue always seems sub-standard and fails before the cold season is over - this was a snap to apply.Because its a flat ribbon the corners can't be continuous like braided gasket and have to be cut and butted. i ran the long sides a bit long and butted the short sides.I did notice a chemical smell for the first dozen or so fires but only when opening the stove door to add more wood. The smell has gone now, several more fires later.Fingers crossed it stays stuck long term.
Cecil Sutherland
2025-02-16 13:31:47
Good product, good adhesive.
Recommended Products