Your cart is empty.
Your cart is empty.Manufactured from top quality components, this is your inexpensive replacement option for your rebuild, repair, and maintenance needs. When you select a genuine OEM part - you can rely on the high quality and effectiveness of the product and brand without having to guess if the product will work in sequence with your vehicle. Protecting your investment is important and choosing the right parts can be challenging. Stick with what you know and choose a genuine OEM part.
J. Richards
2025-07-03 12:33:54
Looks like genuine Subaru PCV valve, fit and function properly
J. McComb
2025-06-08 16:35:53
Part installed fine on my Forester. The old one was filled with oil and the old rubber was very hard to remove, even with two guys trying to pull it off. You might want to find the rubber part to replace and just cut it off to save yourself the trouble.
Kindle Customer
2025-06-01 13:02:20
Replaced the old valve that was starting to clog. A clogged PCV can result in expensive repairs to gaskets and seals. Took about five minutes. I recommend replacing the hose at the same time because they can become hard and brittle.
Katherine Wells
2025-04-27 20:27:48
This is indeed the genuine Subaru OEM PCV valve. Price was good, and installation wasn't bad. I'd highly recommend buying another hose (OEM part 99071AD96A), should cost $15-20. I had my Subaru for 7 years and 145k miles before replacing the PCV valve and by that point the rubber hose becomes so stiff (especially on the bottom, where it connects to the PCV valve) that it's pretty much impossible to get it off and put it back on the new valve without breaking it, it'll be rock hard and no longer flexible. But if you don't know that until you take everything apart you might be without a car for a number of days/weeks until your hose arrives!
Tom
2025-03-29 11:40:56
Works as advertised. After a bunch of months, still working great.
Bob Hanlon
2025-03-04 17:01:22
This is a critical maintenance on Subarus – actually on all cars but the Subarus seem to need more attention in this area. Perhaps the location of the valve has something to do with it. Failure to maintain these PCV valves will result in oil consumption or leakage. This is a direct replacement and takes just a few minutes to install as it is located right on the top of the engine underneath the intake manifold. As you can see in the photos, the hose from the intake manifold goes straight down to the PCV valve. Simply slide the clamp back on the hose (long needle-nosed pliers work well); remove the hose from the valve; replace the valve and then re-install the hose and clamp. Easy as can be.One note – the Amazon “parts fitting confirmation†program listed this as NOT fitting the 2015 Forester so I went directly to Subaru parts web site and checked the number, and Subaru does list this for that vehicle so I went ahead and ordered it. I believe that there was a part number change so that is probably why the Amazon listing was off. As a retired ASE certified mechanic, I can tell you that it (numbers changing) happens all of the time so I always check the vehicle manufacturers’ sites to confirm numbers. You should too!
RJP
2025-02-17 15:02:09
OEM part and easy replacement. Nothing more to say.
Jeff G.
2025-01-27 11:07:59
Can confirm the PCV valve fits 2014 Forester 2.5L, although Amazon "garage" says it does not. Seems to be a genuine Subaru part and exact OEM replacement. Installed on 135,000mi that was using oil. You're going to want to get the hose too.
Pierre Bourdon
2025-01-19 15:00:20
I wish Amazon would still have in stock the PVC Hose Vacuum Part Number: 99071AD96A
Recommended Products
$20.99
$ 10 .99 $10.99
$99.90
$ 44 .99 $44.99