Your cart is empty.
Your cart is empty.Product Description
Installation location:
- Central Control Dashboard
- Note: The motion sensor will interfere with the memory mode of the tesla ambient light Kit, if you want to maintain the memory mode of the Tesla Kit, it is recommended that you do not use a motion sensor or purchase a kit that does not include a motion sensor
Specification:
RGB Acrylic Light Strip
- Voltage Dc:12V
- Number of LEDs: 593
- color: RGB Smart IC
- Output channel: 4CH/RGBW3CH/RGB
- operating temperature:-20°c to 60°c
Millions of Colors & Dynamic Mode
- Remote distance : 0 - 10M
- Phone app control: fit ios and android
- can choose your favorite mode, such as:
- fixed color, color bounce or sound sensing mode.
Non-folding, Bendable
- Feel Free to DIY Length
- 11.7mm Ultra-thin acrylic fiber optic light strip
App Connection Steps:
- Scan the Bluetooth Controller QR code, Download “ZENGGE” APP
- Turn on APP Bluetooth.
- Find the corresponding, matching bluetooth
- Turn on the switch
TIPS:
- Please test the light before installation.
- Please use it under specified voltage. If voltage is higher than limit voltage, components will be damaged. If voltage is lower than limit voltage, bulb will dim and feedback rhythm will slow down. remote control cannot issue commands, so please use it under specified voltage, To achieve original beautiful effect.
- Optical fibers must not be folded in half or overly bent , otherwise , the light cannot pass after damaged.
Package Contents:
- 1*55.1inch Acrylic car light kit
- 1*USB Hub
- Type-C*1
- Remote Control*1
- 1*Pry tool
- 1*Adhesive tape
- 60S Motion Sensor Switch(Tesla)*1
The Bigg J Hoov
August 20, 2025
The media could not be loaded.
E.G.
July 4, 2025
It took me 2 hours to install this perfectly on my 2023 Tesla Model X. With zero experience doing it. Just watched few videos for how to remove panels and wirless charger below the screen. It's good to detach it in order to run cables from driver side to the other side.I only did front dashboard driver side and passenger side, the sides of the center console and cut a short piece to install above the wirless charger. I transferred all cables to the lower panel of the passenger side (left side) and from there I used a USB extender to go into the USB port of the glove compartment so that the bulky usb device of the kit and the thick breakout cable connector wouldn't clog the glove compartment. All in all works amazing and looks great and app is easy to use.Note that for the center console you need two long led strips and this kit has only one. So I bought another kit with just a single long led strip and didn't use the control since you could use the single strips with this controller. Mix and match whatever you need. For the glove compartment I added a USB splitter in order to keep my sentry usb drive and power this kit.All in using amazing parts I was less than 80USD and upgrade to the csr is awsome.
Kevin S.
May 7, 2025
Only give 3 stars because whichever genius processed my order didn't think to send me the correct sizes for a model 3, let alone didn't think to send me a freaking battery. Also some of the pieces don't even work right at all. It displays the wrong color whenever I select an input. So no. Do not buy this kit. Will be sending back shortly.
Justin Ruff
January 14, 2025
Install was super easy and they work amazingly well. I purchased these because I needed them to shut off when the vehicle wasn’t being used and with that sensor, turns off every time after I leave the vehicle. Light strip was about an inch too long but I was able to hide the extra length. No wires visible after everything and actually looks OEM. The only draw back is at night, I have to turn them off because they are too bright and reflect off of the windshield but with the app, it’s super easy to turn off.
A. Arvig
November 30, 2024
This is the coolest addition to the Model Y. I've bought the kit 3 times now to keep adding more lights. If you're a big fan of LEDs just get the 6 strip kit when it goes back in stock.A few things I should mention that I was unsure about ahead of time.1. It won't bend around the center console like some non dreamcolor light strips can. These strips can only go in a straight line. You can use two 29" strips down each side but not one 55" strip to loop around in a U shape. You need the 55" strip for the full dash length.2. You CAN group multiple USB sticks in the app so they all change together.3. Buy a USB hub for the glove box so you can still use your sentry cam USB stick4. Also get the occupancy sensor so they come on when you open the door and turn off 20 seconds after the doors lock. It makes them feel more OEM without needing to plug in to any car wiring directly.I ended up using 2x 55" for the dash, 2x 29" for the center console, and a 10" for above the wireless charger pads. I have a couple strips left to add someplace. Would highly recommend these to anyone who likes this look for their Tesla. Easy to install just take your time and watch a couple YouTube videos to see how they run the wires.
Recommended Products