Your cart is empty.
Your cart is empty.Timber Wolf makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a unique set pattern, create a blade that is everything a wood-cutting blade was meant to be. Blade has over 60% of the speed capabilities of a hook blade while giving you the great finish of a skip. The round design of the gullet eliminates any work hardening zones. Couple that with the special 6.5° rake, 5-tooth set pattern, and .025" thick thin-kerf blade and you have an awesome bandsaw blade!
JEREMY
August 8, 2025
The media could not be loaded.
Tim Timm
July 3, 2025
Got this blade to use in a 15" band saw with a 1-1/2HP motor to resaw wood from storm damage. Got it situated in the saw and ran some mesquite logs through it. Cuts great, cuts straight, moves sawdust really well, Left an acceptable resaw surface finish. Very happy with the cost and performance of this blade. I have some olive wood to run next. I will update if there is a change in my opinion of this blade.
Douglas Ray
June 18, 2025
These are good blades but I'm not sure they stay sharp any longer than the Olson blades which are half the price. Maybe just slightly. Try both and decide for yourself.
Kevs
May 18, 2025
Very sharp and cuts without issues.
C. Pouliot
April 15, 2025
I have a smaller bandsaw (Ridgid 93") that I have used this brand blade on and it worked great at resawing. I have resawn down to 1/4" soft maple on it with minimal sanding afterwards. I bought this 111" blade for my new bandsaw with more resaw capacity and have only done a couple of test cuts so far, but it has been just as awesome as the first one. These are both 3/4" wide blades that I have and the new saw is a Rikon 10-326 DVR. I would recommend this blade for resawing on any bandsaw you might have. I followed the blades installation instructions on the Ridgid but, with more options, I used the Rikon's installation instructions, for tighteness.
Gidget
March 24, 2025
Good customer service and good blade for the money
Erin A.
March 18, 2025
After finding a nail in some reclaimed 6x6 with my previous 1/2 blade, I put on this 3/4 blade from Timber Wolf. Man this thing hogged through that 6x6 pressure treated lumber without slowing and held a much straighter cut than I was getting with my 1/2. This blade is at the max of what my 1 1/2hp saw can take but has worked splendidly so far. I give 4 stars only because I haven't resawed enough to know it holds its sharpness not because of a shortcoming on the blade. After I do a bunch more cutting, I will edit my review.
Spitzerone
February 13, 2025
I had bought a new bandsaw but after set up with the blade that came with it I was constantly getting drift. After doing research I opted to change the blade to a Timber Wolf because of so many positive reviews from wood workers. Boy what a difference! No drift and it tackles even very dense woods with ease. Timber Wolf is now my go to brand.
Victor
December 26, 2024
If you are resawing, this is as good as it gets.
Recommended Products