Your cart is empty.
Your cart is empty.Product Description
TKK VERTICAL LIFTING CLAMP 0.8TON
SAFETY FIRST,LIFTING SECOND
STURDY STRUCTURE
The Vertical Plate Clamp made of premium quality low-carbon alloy steel material with powder-coated, durable and stable.
HIGH QUALITY CLAMP JAW
The lifting clamp has a greater jaw aperture enabling plates of varying thickness to be lifted with the same clamp. The jaw opening range: 0-0.8''.
EASY TO USE
Just place the steel plates on the jaw and rotate the lever then can lifting operation.
SWITCH LIFTING SHACKLE
The clamp is fit with shackle facilities to enable easy fitment of the clamp in suitable position.
SAFE SPRING DEVICE
Vertical Clamps are equipped with a safety Spring device,ensuring the clamp does not slip when lifting
WIDELY USED
Vertical lifting clamp widely used in lifting and transporting of steel plates or metal sheets from all positions like vertical and sidelong.
Notes:
- NOT operate a malfunctioning or unusually performing clamp;
- NOT lift or pull more than rated load for the clamp;
- NOT use clamp with twisted, kinked, damaged, or worn load chain.
- NOT operate aclamp when it is restricted from forming a straight line from hook to hook in the direction of loading;
- NOT apply the load to the tip of the hook or to the hook latch;
- Protect the clamp from weld splatter or other damaging contaminants;
- Thank you for your support to our products!
Customer
September 2, 2025
Works great its a little smaller than I thought it would be but does what it suppose to, the eye could be a little larger to accommodate hooking it up to the hoist but can work around that.
Chris Cook
August 22, 2025
Used to lift a 1" thick steel plate that weighed about 850lbs. No issues and worked well.
travis tullos
August 21, 2025
Worked great with no issues...
Jason L Higgins
June 6, 2025
Works great so far. Welder / fitter
Customer
April 9, 2025
I haven’t used it but it doesn’t feel low quality, I can’t wait to break it out on a job
D.L.
March 7, 2025
I ordered the 2200lb (1 ton) version of this clamp to use for lifting steel plate.The sides of the clamp are made from thick 4 gauge (5.9mm) steel plate that has an additional trapezoid shaped metal plate welded to it in the center for reinforcement. The center cavity has a few plug welded rods, one for the hanger and one for jaw hinge. The plate is gripped by a toothed jaw that is on a cam, such that when lifting, the heavier the plate, the more clamping force is applied. There is a spring assisted lever that disengages and opens the jaw. The hanger eye and pivot are cast.The entire assembly is robust and seems heavy-duty enough to accommodate the rated load. The welds were a bit sloppy for my taste, although, to be fair, I do precision fabrication where every weld needs to be perfect, appearance and that level of precision don’t seem to matter as much for this device. Still, I would have preferred higher quality welds and a better paint job.Another consideration is there is no swivel on this clamp. The hanger has a pivot assembly but no swivel, which limits the ability to turn the plate unless your hook has a swivel.As far as operation, the clamp does what it is suppose to do. It grips the plate tightly and holds it firmly. I did not experience any slippage or issues in my use. When it comes to value, it is hard to complain about this plate clamp, at the time of my order, the 1 ton clamp was priced around $45, which, considering how beefy this clamp is, I consider to be an very good value.I can’t yet speak to longevity; I plan on keeping an eye on the critical parts to see how they age with use. Most of my use will be lifting 1/4†to 1/2" thick steel plate, up to 5’x10’, which will max out at about half the rated load for this clamp, which should provide a decent safety factor and peace of mind.Bottom Line: This is a heavy-duty plate clamp that gets the job done at a very reasonable price.
Robert H
February 24, 2025
I am very pleased with this lifting clamp. It's a beast and far stronger than I need for my shop use but that being said, it's confidence inspiring to have that extra weight-lifting capacity if the need ever arises. As it is, I only intend to use this for moving 4'x8' sheets of metal around my shop. Knowing that this wasn't a sufficient test for this heavy duty clamp, I decided to open the jaw and slip a large clevis hook that I had mounted to the top of an engine and transmission sitting on the floor in my shop. It lifted that assembly into the air and kept it there for a few minutes, as I shifted the suspended weight around in the air. Aside from the fact that it was like I was holding up feathers, as far as the clamp is concerned, I also wanted to test at this time, the security of the handle that is used to open and close the jaw, while under load. The jaw's locking mechanism is slick, smooth-operating, and easy to use and yet, while under load, it doesn't allow for accidental disengagement, which was of utmost importance to me (and I would expect, for anyone). So that was a plus. Overall, I cannot imagine a better materials lifting clamp than this, so I highly recommend it.
Customer
December 12, 2024
This is a massively heavy duty tool. Rated at 2 tons. And yes that’s a normal size clipboard in the photo. The other photos you can see using this vertical panel clamp from TKK using a John Deere 1025R. Since this is a vertical clamp, it’s very easy to figure out where to attach it or if you get it in the wrong place to move it for good balance and for lifting items safely (to keep them from swinging) . This tool made a lot of difference compared to attaching and lifting with a chain or a different type of hoist.My husband is thrilled to have this panel lifting clamp and says it can do so many jobs and do them much easier and much safer than without it. This tool from TKK is not just built. It’s overbuilt. I have no doubt it will last for generations.
Recommended Products