Your cart is empty.
Your cart is empty.
Tired of bent or broken sway bar end links when off-roading or even everyday use. Tuff Country's sway bar end links for the Dodge Ram are right for you. These simple to mount advanced sway bar end links replace your front factory end links. Heim joints are used on the top and bottom to allow more flex and reduce binding. Mounts to existing holes. Designed to fit Dodge Ram trucks with 0" to 3" of front suspension lift along with ALL Tuff Country lift kits 2" to 6". Will also fit with other manufactures lift kits that are using an upper sway bar drop brackets.
Fits Following Years: 1998 thru 2001, Vehicle Make & Model: Dodge Ram 1500 4wd
Installation Note
Designed to fit Dodge Ram trucks at stock height and with ALL Tuff Country lift kits 2" to 6". Will only fit other mfg's lift kits above 3" that use upper sway bar drop brackets.
Features
- Replace broken or bent Dodge Ram sway bar end links
- Adjustable treaded body, will fit with 0" to 3" of front suspension lift along with ALL Tuff Country Lift Kits
- Heim Joints for more flex and less binding
- Simple Installation
- Great for Off-Roading
Specification
- Amount of Lift will Fit with:
0" to 3" & ALL Tuff Country Lift Kits 2' to 6" (see Installation Note above)
- Average Install Time:
30 to 60 Minutes
Technical Files
BG
2025-08-29 15:03:54
Used these to help my front suspension on a 2012 Ram 2500. I have a 3" coil level kit. These replaced a set of Suspension Maxx 2"-3" units that were horribly weak and the bushings wore out fast. These units are beefier, articulate a lot better. Truck feels more stable and no more metallic clunks or instability.
Jonathon Stiger
2025-08-15 21:41:28
I would rate this good but ordered this part new and when I received it today, the plastic packaging is all cut open with parts scattered with no parts check list nor installation instructions. Terrible quality. Need these parts to complete the front end and now can't trust using what was tossed around in the box. I'll give a better rating when I receive a actual new unit opened kit.
brandon mcavoy
2025-08-09 18:28:22
I liked the product. It was not complicated to assemble and they look nice and work great! No more bushing to go bad.
Cheryl Word
2025-07-24 17:20:30
Missing the bag of hardware for the sway bar links
Customer
2025-07-20 12:01:46
The only real complaint I would have is the lack of assembly instruction. Which was no big deal, I just looked up pictures of product and assembled them that way. I did have to drill out the lower bolt hole (1/9) and I didn't need adjust the height links.
ken little
2025-04-26 16:45:17
Instalation was fairly straight forward. Now my sway bar sits back where it should with my 3" synergy springs. No more binding is a plus. On the '08 I didn't have to drill out the lower bolt hole as the instructions said might be needed.
Tyler
2025-02-16 12:16:10
3 of 4 nuts are the wrong thread pitch. How can you sell me this product without telling me I have to DRILL OUT my existing Stabalizer link holes in order to install your product? If I would have known in the 1st place I would have never ordered these. Honestly. Come on. Now i find some time to replace them after work in the parking lot to find out that NOOOOOOO you can’t just install them. YOU HAVE TO GO GET A DRILL AND A 9/16 DRILL BIT… Something so stupid and but yet here I am dealing with it bc of what or why? Smh this is what ticks me off.
Momma Boesy
2025-02-06 12:34:49
I did a small 3" lift, so these were a must to get everything lined up. They are heavy duty and have worked well for over a year now.
Recommended Products
