Your cart is empty.
Your cart is empty.Ubaldo De luna
September 2, 2025
I took a chance and purchased these fender flares for my Toyota tundra. I have owned other trucks where I have installed the bushwhacker fender flares, which are quite expensive at over $350 for a set. These cost me under $200 and I was not Sure if I would be satisfied with them, but I took a chance and bought them. I took them out of the package, and they appeared to be of good quality just not as thick material as a bushwhacker product but they were plenty durable enough to put on my truck . Prior to installing them I shot them with a coat of black raptor liner and they came out absolutely beautiful. I installed them and they fit perfectly all the holes matched up to my fenders. No problem. They were very easy to install and everything fell right into place And I was totally surprised at the value price point of these fender flares compared to others. I highly recommend them to anyone, wanting to equip their truck with fender flares.
me
August 12, 2025
The instructions are not great, and the holes are hard to get in the right spot. I recommend starting the screws into the metal clips they give you, before installing them, because the screws were very tight and broke a piece of one the bracket and I had to repair it. But once you see all the existing plastic clips take the screws they give you it all goes together pretty straight forward. And they give you enough screws to replace the factory ones. I wasn't keen on losing my mud flaps but hope this does enough to keep it from spraying mud and dirt up the side of my truck. I replaced my wheels and rims. I went to 275/70/18 and it all looks good. Overall a good product and a good price.
TRUMP 2024!
July 17, 2025
Took mine to Maaco paint company and they color matched them for $300 so now they look like factory. You will need to start the screws into the 4 metal clips for the front upper mounting bracket BEFORE you install them so you won't have to fight them after you attach them to your front fender well. You will also need to press them firmly against your vehicle to get the holes lined up to the factory holes.
CHCady
June 24, 2025
The flares showed up as they said in a well packaged box. I had other more expensive flares on a previous truck, but decided to give these a try. These appear just as well made as the more expensive ones for a 1/4 of the price. All the parts needed for install were there and they and fit fine. The instructions leave a little to the imagination for the small bracket that needs to be installed in top of the front wheel wells, but that's not too bad. The holes in the screw clips attached to those brackets were technically too small for the screws, but I put them in a vise and ran the screws through them once or twice and everything went together nicely. My 2014 Toyota Tundra 1794 Edition looks even sharper now. Decided not to paint them and leave them as is and Really like the way they turned out.
Sam Herrera
May 27, 2025
I would recommend these to anyone wanting or needing fender flares. I got a fix-it ticket from CHP so had no choice, but ended up liking how they looked on my truck. The bracket on the front fenders was a pain in the butt, but overall not a very hard install. This is my second purchase from Tyger and I will continue to buy their products.
Michael
April 11, 2025
Great looking flares for the price. However, instillation was very time consuming and did not go as planned. The instructions did not help they were written very poorly with black and white picture diagrams. Their web site did not help either no trouble shooting links or help with general installation. And if you're thinking about using YouTube for help... think again... You'll find many brands with a variety of instillations for different types of trucks, but non showing a real start to finish/close ups of what they are doing during instillation. Many were just a waste of time. As for the two brackets that were included in the package, they turned out to be a real mind twister. You have to be an octopus with many hands to install them. After two and a half more hours of messing with it, I decided to drilling additional holes for my installation. Once completed I must say they looked great.
Robert Kyasky
March 30, 2025
Easy install. But took a few hours.
PAPA.AMG
February 27, 2025
After returning my Buckwacker units due to poor fitment, I was hesitant with this less expensive option. I test fitted them and went ahead and painted with 4 coats of base and 5 coats of clear, color sanded and buffed out. Because Tyger does not have black bolts, I bought some Buschwacker black bolts here on Amazon. Still, even with the additional purchase, the total price was substantially less than the BWs.Overall fitment is going to be dependent on your truck as they are not made to the tolerance like a BMW. There will be differences in manufacturing, and if there is history such as an accident. Mine went on with a few holes 'close enough' to get the bolts started. The plastic clip for the rear bottom hole are a joke, they are too large to fit into the factory holes. I instead used a bolt,washer, but in these locations on both sides.They are mounted solid with no flex or movement. Again, an issue with the BW brand.Overall, very happy with my purchase.
Trav
January 31, 2025
these seem to go on easy enough and fit good, dont see any difference between these and the more expensive ones other than i was able to buy these have them painted and they were still cheaper than the others that people seem to think you have to have. ive had them a few times and these actually seem to fit tighter.
Tyler
January 10, 2025
I was very surprised with the quality of these flares at the price point. Why spend 5 times the price for Bushwhackers when you can have these painted and on your truck for less than $600? Install time was a little less than 3 hours and instructions were clear and concise. Only reason i'm not rating 5 stars is because they are only 1.75 inches of tire coverage.
Donato Dorazio
December 26, 2024
I used to have flares on my truck when I bought it used but I didn’t have spacers and had smaller tires on the truck so it looked weird. I sold them, so eventually looking back, I liked that look and bought these along with 2 inch spacers for the factory rims. It now sits perfect in my opinion and the shape of these flares are way nicer than the symmetrical round ones I had before. They got more of a pointed shape on the back and it looks really good.Install:Took time, wasn’t hard or hard on the body. Just takes time. The rubber was a bit hard to put on in spots, but not impossible. Just kinda tedious. 2 guys would make it a bit easier to install the rubber seal and flares but it’s still very doable with one person.Overall, really happy with these and the fitment and I’m happy I sold the other ones cause the shape of these are way nicer and more aggressive looking
Customer
December 11, 2024
Now i can speed down the gravel road!
Recommended Products