Your cart is empty.
Your cart is empty.Upgraded Engine 12mm Drain Oil Changing Hose, Oil Drain Aid Tool, M12x1.5 mm, 18" Length
D in NM
2025-08-29 12:14:51
This is the second time I have ordered multiple of these oil drain hoses (for a total of seven). They are consistently of great quality and work perfectly to make future oil changes very simple by extending the drain plug to a place you can reach and capture the old oil with ease.There may be some work involved (and oil spilled mess) to install because of very limited access issues... which is proof that you needed to put this on in the first place. I just wish manufacturers would install these on new equipment.
sgrams
2025-08-28 13:57:05
The drain hose is plenty long, I haven't made the first oil change yet, to cold to use the machine but when I do I will comment.
STOSH
2025-08-07 20:28:10
super heavy duty for this application but good quality and worked well….for this generator…..
dcs
2025-08-02 12:35:20
My husband loves this! He used it to change the oil on our pressure washer, and it saved him a ton of cleanup! The way the oil drain is placed, there is no way to drain it without getting it all over the frame of the machine and then, of course, the floor! This saved all of that hassle!
Matt
2025-07-13 18:35:49
Seems like a great device. Unfortunately it would not fit my Honda HS 928 snowblower as it interferes with the left side knobby tire. If I was to install this tube the tire would tear into it...
M. Harr
2025-07-02 14:13:38
Seems to fit and hold oil with no leaks. The true test will be after some heavy use. 420cc engine and it holds one quart of oil and the dipstick is just below the middle of the fill zone. I didn’t use the drain plug washer or any teflon tape on either connection, the hose to the generator or new drain plug to the hose. The new plug is a 7/8 inch.
Capone MIchigan
2025-05-15 14:18:07
keeps dripping oil at the end, nothing you can do to fix it, it leaks at the swivel. be careful if you buy one, it will leak oil and you will blow your engine. I bought this for a china mini skid steer. its basically useless also, when you remove the oil filter you are going to get oil all over the place anyway.
Brian K
2025-04-21 14:43:44
Worked on my Miva mini excavator with a Rato 420 engine. I had to loosen the engine mounting bolts to get it to thread since the diameter of the hose is nearly the same size as the clearance for the hole. But once the engine mount was lose it threaded right in.
John V.
2025-03-24 15:07:01
Raised my motor 1/4†before I installed it. Fit great
Brendan B
2025-01-28 16:49:34
Added as a drain on a agt qkr16 with gas engine. Screwed right in
Tyler Dauphinee
2025-01-04 13:27:14
Love it, would buy again
Cory Chisholm
2024-11-24 14:16:12
Works fine for the 420cc fake Briggs on my Chinese mini, little tight to get on but serves the purpose.
Daniel
2024-11-15 18:28:28
Parfait pour mon usage et bonne qualité
Recommended Products
