Your cart is empty.
Your cart is empty.Product Description
KUMETENESS Garage Wall Protector's Features
- PVC Abrasion-Resistant Coating Newly upgraded and thickened, it's scratch-proof, waterproof and oil-proof, perfect for garage environments.
- Oil-Resistant & Scratch-Resistant Surface The surface features scratch and abrasion resistance. Inside, it's filled with high-density elastic material that's odorless, offering enhanced protection.
- Cuttable & Flexible With an ideal thickness, it's easy to cut and shape while remaining flexible, fitting well on 90-degree corners, curved surfaces and columns.
- Fiberglass Mesh Adhesive Its unique integrated fiberglass back adhesive provides strong adhesion. When removed, it won't tear or leave marks, and the adhesive cover is easy to peel off.
- Upgraded Width Measuring up to 7.5 inches wide, wider than competing products, it offers large-area protection for your car against medium impacts.
Widely used,It can protect cabinet doors, glass doors, the wall area near trash cans, bicycles, and any place you want to safeguard.
For Bicycle
Apply the protector to the wall. When a bicycle is hung on the wall, the protector can prevent the wall from being damaged.
For Refrigerator Door
It can protect the refrigerator door from being hit.
Protect the cabinet door
It can protect furniture items that are prone to breakage, such as cabinet doors and glass doors.
Instruction:
- Please clean and dry the wall surface and remove any particles on it;
- Peel approximate 4” or 10cm adhesive cover from one side and apply the protector on the wall.
- Slowly peel the rest of the adhesive cover and apply the protector on the wall at the same time to make sure it is straight and no space between it.
- Repeat the same steps above for the other side of your garage wall.
D Shaw
2025-02-21 12:19:26
I just purchased a new truck, and the garage is temporarily crowded so I'm forced to park a little closer to my workbench on the driver's side. And if I'm not careful when I open the truck door it will contact the workbench right at a metal trim piece that runs the width of the bench. So, I ordered this and very happy I did! It is the perfect thickness to protect without being too thick. The adhesive is very strong and sticks right away and conforms to the surface that you are applying it to. For example, I put in on a piece of metal trim that is diamond plate, and it conformed and adhered perfectly. It is fairly easy to cut and the paper covering the adhesive peels away easily if pulled back on itself. The side that faces out is a tough PVC material. In my case, I trimmed some 1 1/2" widths and the full length of the material and applied to the trim on my workbench. After I was finished, I pulled my truck in to where I park it and tested it a few times by standing outside the truck and opening the door against it. It worked perfect!! I also have a classic car parked in the garage and will apply a piece of this next to it as well. I would highly recommend it for this and other similar applications.
T
2025-02-13 17:38:44
Nice white foam, cushy, and will provide good protection for my car door. Looks a lot better than pipe insulation on my garage freezer.
Recommended Products