Shopping Cart

Your cart is empty.

Your cart is empty.

uxcell® Shunt Resistor 10A 75mV for DC Current Ammeter Analog Panel Meter External FL-2 Shunt Divider

4.3 (2) Write Review
Free shipping on orders over $29.99

$8.89

$ 4 .99 $4.99

In Stock
  • 75mV Voltage Drop and 10A Rated(Maximum) Current, 75mV satisfies most of the DC ammeter.
  • Made of Copper with Anti-Rust plated, ensures the performance of stability and durability.
  • External type. Two holes on both sides for a solid placing, and nuts for the circuit connection.
  • 0.5% Accuracy and 120% Overload Rated Current(For 2 hours)
  • Connection. A shunt needs to be placed parallel with the Ammeter(Moving Coil Galvanometer), to bypass the current. Normally, the two outside terminals were connected with the power circuit directly, and both the inside terminals placed in series with the Meter.


DC Ammeter Shunt Resistor
Rated Current: 10A
Voltage Drop: 75mV
Materials: Copper
Overload Rated Current: 120%(2 Hours)
Accuracy: 0.5%
Working Temp: -40C to 60C(-40F to 140F)
Type: FL-2 External
Length: 120mm
Width: 25mm
Height: 23mm
Weight: 59g
Application: An ammeter shunt allows the measurement of current values too large to be directly measured by a particular ammeter. In this case, a separate shunt, a resistor of very low but accurately known resistance, is placed in parallel with a voltmeter, so that all of the current to be measured will flow through the shunt.Package Content:
1 pcs x 10A/75mV Shunt


George
April 22, 2025
Worked for my spare part, cheap dirty, current read application.
George
January 24, 2025
Worked for my spare part, cheap dirty, current read application.