Enjoy free shipping on orders over $29.99

US Dollar

0 $0.00

Your cart is empty.

uxcell A48 Drive V-Belts 48' Inner Length 47' Inner Girth 13mm Width 8mm Thick JIS Standard A-Section Rubber Drive Industrial Transmission Belt

4.7 (13) Write Review

Free shipping on orders over $29.99

$9.69

$ 4 .99 $4.99

In Stock

Qty.:

About this item

Size: Model: A-48; Inner Girth: 1191mm; Top Width: 13mm; Thickness: 8mm.
Material: It is made of neoprene rubber for resistance to oils, water, and some solvents.
Function: To link two or more rotating shafts to transmit power in a drive system. Even load distribution on belt drives and good wear resistance.
Feature: The trapezoidal shape of the belts cross section wedges into the groove of a similarly shaped sheave or pulley to provide traction and alignment.
Applications: Used for drive systems in the automotive, agricultural, textile, printing, mining, and office equipment industries, ect.

Product Description

How to measure the length of the required belt:

Wrap the rope around the two pulleys
Make a mark
Place the marked rope on a flat surface and use a tape measure to measure the distance between the two marks, which is the inner circumference of the belt

To accurately measure the length of the v-belt, use a belt measuring tool or a soft ruler, not a steel ruler.
The width and thickness of the belt should also be measured to confirm the type of belt.

Installation:

First, loosen the tensioning device, then press the v-belt into the pulley groove by hand, and finally tighten it again.

Notice:

Pay attention to the wear of the belt groove of the v-belt pulley.
Check whether the centerline of the two pulley shafts is parallel, whether the corresponding pulley slots are aligned, and whether there is any skewing phenomenon.
When one v-belt is badly worn and cannot be used, replace all the v-belts at the same time, with the same type and equal length, so that each belt has the same tension.

Maintenance:

Regularly check the v-belt tension, after adjustment still can not meet the specified requirements, must be replaced with a new v-belt.
In use, the operating temperature of the v-belt should not exceed 140°F, do not apply belt grease casually.
Various types of v-belt, should not be coated with rosin or sticky substances, but also to prevent v-belt from oil, butter and gasoline, otherwise, it will corrode the v-belt, and shorten the service life.
V-belt should be stored at a relatively low temperature, with no direct sunlight and no oil and corrosive fumes place.

Application

Lawn Care Equipment

Repair lawn equipment, snow removal machine

General Purpose

Repair band saw, box fan, drilling machine, trimmer

Automotive Repair

Replace the automotive belt



Customer Reviews	66	228	276	107	31	18
Type	B	A	M	K	O	SPZ
Width	16mm	13mm	10mm	8mm	10mm	10mm
Thickness	11mm	9mm	6mm	6mm	6mm	9mm

Randy Cook

2025-09-03 16:49:40

This is a great product. I would highly recommend it.

Brian Stovall

2025-08-18 17:23:15

This is a very high quality belt and fit my tractior just like the oem one did!

Anonymous

2025-07-31 14:58:27

Accurate product description

Lazar reutov

2025-06-27 13:46:05

Good fit for application

Customer

2025-06-21 10:17:43

Works good

cannoneer

2025-06-05 10:17:07

Unfortunately whoever was responsible for converting metric to inches failed on this one. It measures 1.20 inches too long and, of course, is a very poor fit. An A-50 belt is a standard size. They missed.

WillyG

2025-05-25 18:31:37

Not much to say, cost effective, will update on longevity!

David Kemp

2025-05-18 13:04:28

It was just not the correct size so I had to order a larger belt.

Daniel Fournier

2025-05-14 21:48:14

Outil

Brian

2025-05-13 10:26:12

Fits perfectlyWill hopefully last a long time

Tom

2025-03-19 11:54:19

Excellent

Badger

2025-02-08 20:48:14

Quality of product, speedy delivery, price and communication with the company

con

2025-01-21 14:07:08

ride-on mower deck belt .arrived quickly and is already on the mower. Thanks

Shopping Cart