Your cart is empty.
Your cart is empty.Kirby Palm
2025-08-22 13:55:21
These turned out to be the wrong size for what I was doing, but they are still perfectly good O-rings.
CarefulPurchaser12
2025-08-17 15:28:20
It's always a risk, going with an off-the-shelf product instead of the manufacturer's part. In this case, it was not easy for me to ascertain whether the advertised Kohler o-ring on Amazon was the right one. At $7.99 for a single O ring, I decided to take a chance on these uxcell rings, at 10 for $7.03. If they fit, I am fixed for the life of my kitchen. These fit perfectly, but make sure what you have is this: https://www.amazon.com/gp/product/B000MF6VKG/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1When I moved into my house, the previous owners obviously were not handy, and there were 3 different kinds of sink stoppers in the drawers and under the sink, and of course, none of them worked. So I looked at the drain, saw it was Kohler, and took a chance by ordering the above product for $21 plus tax. Ouch. And of course after 1.5 years of use, the o-ring stretched and failed. Few things in life are more frustrating than to fill a sink with hot water, put soap and a bunch of dishes in it to soak, come back 15 minutes later and find the water gone!Anyway, now that I have put the uxcell O-ring in, the basket sits properly and the sink holds water easily. I also note that I went to the hardware store (Ace Hardware) and they had a nice assortment of O Rings, and did not purchase one because I though it looked too small. In retrospect, I believe it would have worked also, but in that case, I would have gotten 2 for $3.50, or 1.75 per o-ring, compared to the UXCELL rings at $0.70 per. Kind of a case of 6 of one, 1/2 dozen of another. Anyway, these work, and I am happy with the purchase, and YOU benefit because now you have the exact measurements in the description of this product.
RET
2025-08-12 15:04:45
The o-rings received are neither made to the advertised specifications nor made to industry standards. The advertised specifications show that the o-rings have a 2 mm cross section (which is an industry standard for metric 0-rings). The o-rings received have a 1.5 mm to 1.6 mm cross section. The received o-rings fail to properly seal a space that requires a 40 mm ID X 2 mm width o-ring. The Chinese maker did not use enough nitrile rubber to produce properly sized o-rings.
Roy Q
2025-07-29 12:33:53
I purchased these to replace the existing ring burr O-ring on my Baratza encore ESP. They are slightly thicker than the OEM O-ring. This seems to allow the ring burr to fit a bit more snug which intern appears to have improved. Grind quality.
J
2025-07-24 09:44:36
Can't say if it will fit yours, but these did the trick for me to fix leaky tubs, and saved having to change the stoppers out.
Steven W.
2025-07-11 13:31:46
Sizing is close enough for most applications but not exact. Slightly too large on a 35.7mm diameter motor
David
2025-06-04 14:25:27
I got these to replace worn out o-rings on my fishing rod tubes. They appear to be just the ticket for my application so far. If I have any issues I will update this review.
T. R.
2025-05-17 14:40:02
The dog’s hair dryer was missing a rubber gasket on the hose. I measured one that was on the other end of the hose and the units I ordered from Amazon fit perfectly! Yeah!!
Customer
2025-04-03 10:43:29
Very good item and fast dispatch.I can now use my garden swing chair safely again!
Gerhard Uthoff
2025-03-31 10:41:28
Super Qualität und schneller Versand
Ray Waring
2025-03-13 12:06:46
Ok
Old world values
2025-02-14 14:17:06
Have used this company before, usual reliable and quick service.Needed quickly as guests arriving next day. Slightly smaller than original (the 2mm cross section was 2.5mm) but I knew that when ordering and it would still create a perfect seal. Price wise it was cheaper than buying 2 specific bath plug spares and with next day delivery this was the one for me.
Mr G
2025-02-07 11:08:40
Excellent product as described.
Recommended Products