Your cart is empty.
Your cart is empty. Specifications
Item Model Number: HV-4-KP
Table Diameter: 4 in / 100 mm, ±2 mm
Top Height for Horizontal Mounting Chuck: 4.7 in / 120 mm, ±3 mm
Center Height for Vertical Mounting Chuck: 2 in / 50 mm
Rotary Table Handwheel Scale Value: 6'
Rotary Table Handwheel Scale Number: 100
With or Without Vernier Scale: No
Worm Gear Ratio: 1:36
Chuck Diameter: φ 3.1 in / 80 mm
Net Weight: 11.7 lbs / 5.3 kg ± 3%
Product Dimensions: 6.3 x 5.8 x 4.7 in / 160 × 148 × 120 mm
Package Content
2 x Handle
1 x Chuck Wrench
3 x External Jaw
2 x M10*40 T-Bolt
2 x M10 Nuts
1 x User Manual
Shane M
2025-08-23 11:20:01
While I'm not using this for its intended use, it is a well-made piece of hardware. Be ready to strip it apart, clean it up and lube it properly and you'll have a great clean-moving setup.Great buy for the price!
JWS
2025-08-15 11:11:44
This item worked very well for a one-time project that lasted about a week. Perfect pricing for a short-term need. I suspect that if it were needed on a regular daily basis, you'd want to spend more for a higher quality item.
Brooks B.
2025-05-31 11:31:29
Debur almost evey edge and grease or oil all moving parts. Every thing I have bought from Vevor is just one or two steps short of being a much better tool. For the price and what my time would have cost, not a lot of savings. It's still exceptable, for what I needed it for.
Larry L.
2025-03-23 18:42:47
I used it for jeweling rifle bolts , worked well
James L
2025-03-03 12:43:57
This retort table is just not usable. I can barely turn the dial to rotate it and it binds up. Just poor quality and badly made.
bob
2025-03-01 13:10:35
Works great
Ture Persson
2025-01-19 11:08:15
Fungerade mycket bra till min användning och mycket prisvärd ++++++
HeikeundMartin
2024-12-04 15:56:53
preiswert und gut
Recommended Products
