Your cart is empty.
Your cart is empty.Product Description
Dave
2025-09-05 10:03:01
I put this directly on top of a 8" carbon filter (vertically oriented). So far, it seems to work as well as the Can Filter it replaced. It had what looked like a little black weight clipped to one of the fan blades, and it didn't come off when I gave it a light tug so I just left it there. So far it seems to be running well so I guess it was a weight put on to balance the blade.I like that the remote plugs into the unit via USB-C, and that the cable is ~10ft long. (I operate this in my bedroom from my bed, so that's perfect). If you need this to run any more complicated cycles than 10 ON 50 OFF, you'll want the more expensive control unit. For my purpose this is great. I'm using it to replace a Can Fan that I think was destroyed by a Speedster (doesn't want to turn on anymore).I like the EC motor that seems to be able to run reliably at low speed seeing as ALL fans this size and bigger are loud at full power (this fan isn't loud, but don't expect to sleep next to it at speed 4 or greater).It's mostly synthetic material with plastic fan blades, whereas the Can Fan was all metal, but it makes this fan considerably lighter than the Can, and if it's rated at 1/3 the power consumption it's saving me money. It seems to move as much air as the CanFan, so if it lasts at least as long I will be pleased. So far I'm happy.
Ron H
2025-08-24 09:56:54
This fan works great with the laser and I needed an extra boost to get the laser vented through about 10 feet of vent pipe. It exhausts the fumes rather well and am pleased it has a variable fan speed selection.
Coco
2025-08-08 11:49:37
I purchased the 6" for a 2.3×4.6 and it gets the job done on a low setting. So far it is working great with my lights and Vivosun fans. Set your temps and humidity and it will dial in nice
Tristan K.
2025-07-28 13:11:50
Great fan design, pretty quiet on first two settings (you almost can't hear it in a quiet room) in free air, let alone with it connected up, some minor bearing noise which you get with ball bearing fans, I wish there was a sleeve bearing version (with oil included for people and instructions to oil regularly).Controller works great (E42) and is fast and accurate (no waiting for temp/RH changes) but wish it had CO2 measurement and support for a generic 10V dimming output for other leds/custom ones. I'll do some snooping and see how it's working so far if PWM or voltage based, I'm sure the CS at Vivosun will tell me if I ask, they are great.Overall probably the best bang for buck if you want a quiet fan. G4 is their quietest fan. Db rating I'd say is likely accurate when the fan is mounted properly (suspend/isolate it) and with a filter or piping etc.
SAID
2025-07-15 12:38:00
I used this for the kitchen to pull out the smoke and cooking smell from the blower of the over the range microwave. It is strong and quiet. My only complain is that it is 50 Watts not 35 Watts as the mentioned in the listing on Amazon.
tony
2025-07-11 18:08:36
easy set up, connected to phone easily, works great!
Alex Floe
2025-06-28 10:13:52
I got this just for the smart controller it was the same price during the black Friday sale as the controller itself. So I said mind as well but the controller and duct fan. I opened the package and looked at the instructions list for all the parts that should be in the box.Now I don't need the duct fan but for space in the area I placed this fan inside the grow tent. as for the parts I was missing a connector that plugs into the smart controller that gets hooked up to AC power outlet. So I started tinkering around and pulled out the duct fan and noticed a usb-c hook up i plugged that in and the controller powered up.Now for my issue!!! I plugged everything in zip tied the wires to the frame of the grow tent and the smart controller said the fan was on level 1. I reached up to feel if air was moving through the fan!! this was not the case so I started to pull the duct fan down cutting all zip ties. I get the fan out plug it into the outlet and boom fan fires up I plug in the smart controller adjust the fan level to 10 plug it in again to the outlet and nothing happens. I can hear the compactor clicking so I know power is getting to the fan it just doesn't work hooked up to the smart controller. So I take the controller off of the fan via usb-c hook up. plug the fan in again and now it doesn't even turn on without the smart controller! I now have it taken apart looking for where this issue is think there is an issue with the motherboard or the compactors attached to the motherboard. probably going to return and see if I can get a replacement.
SpeedeeGonzalez
2025-05-08 14:46:42
A well built fan. Not too noisy like some others I tried.The controller is nice, with a bright, clean green display.It also remembers the last settings if the power goes out;or in my case I use a remote control switch to turn on and off.Plus a 3 year warranty, so far I am very pleased.
Togo
2025-05-07 18:46:12
What is the carbon filter who pass for aerozesh g4?
Konsta.Pas.
2025-04-27 14:43:29
Schwache Leistung, gute Regelung Bediengerät aber sehr laute Anlauf! Halt nicht mit einen S&P...
Tomek Serwisnki
2025-04-04 18:35:41
Polecam
Customer
2025-02-17 17:18:43
Excelent Product! I'm not using it for plant growing but for ventilation of a server rack in a small room.It's quiet and keeps the rack at room temperature. Highly recomend!
Benjaman
2024-12-30 11:39:37
Do not use this seller if you value discretion. Very obvious packaging just left on the doorstep. Product seems decent but I'll be ordering from elsewhere in the future.
Recommended Products