Your cart is empty.
Your cart is empty.Remember when you could drill into your big old workpieces? Take your drill press to the next level with the WEN Drill Press Table. The spacious 23-7/8-by-11-7/8-inch table creates additional support for larger workpieces. The sturdy 1-inch thick MDF body prevents warping and wobbling during operation. Onboard rulers maximize accuracy for precise and even cuts while the adjustable 23-5/8 in. x 2 in. fence and stop block allow you to perfectly line up any project. The removable insert allows users to drill completely through their workpiece without damaging the table. Our unique table design provides clearance for the drill press’ height adjustment crank, making for easy vertical adjustments of your table. Compatible with the entire line of WEN drill presses, including the WEN 8-Inch Drill Press (models 4206 and 4208), the WEN 10-Inch Drill Press (models 4210, 4210T & 4212), the WEN 12-Inch Drill Press (model 4214), the WEN 15-Inch Drill Press (model 4225), and the WEN 17-Inch Drill Press (model 4227). Although this drill press was designed with WEN in mind, its universal fit allows for installation on drill presses of all shapes and sizes. Simply tighten the included mounting clamps onto tables anywhere from 4 to 22 inches in width. This unit also comes with extra mounting clamps that double as hold down clamps to ensure your workpiece stays secure while drilling. And, because it’s a WEN product. all to make sure you remember WEN.
Roy G.
August 24, 2025
For anyone serious about accuracy and repeatability in their drilling, a good drill press table is a must-have. I recently upgraded my setup with a small drill press table featuring a metered fence, and I'm genuinely impressed with the improvement it's made to my workflow. Let's face it, not everyone has a massive workshop. This table strikes a great balance, offering a decent work surface without overwhelming my small drill press. It's perfect for smaller projects and intricate drilling tasks where precision is paramount.The integrated metered fence is the star of the show. The incremental markings are clear and easy to read, allowing for accurate and repeatable positioning. No more guesswork or relying on a wonky T-square! This feature alone has saved me time and frustration, especially when drilling multiple holes at precise intervals.Setting up the table was a breeze. It typically attaches to the drill press table using a simple mounting brackets. The instructions were clear, and I had it installed and ready to use in minutes.This small drill press table with a metered fence has been a game-changer for my drilling accuracy and efficiency. It's a well-designed, well-built tool that has quickly become an indispensable part of my workshop. If you're looking to upgrade your drill press setup and prioritize precision, I highly recommend considering this type of table.
Customer
August 22, 2025
Very nice for the price and fits on Harbor Freight drill press. veery easy install.
Grizzo40
August 11, 2025
I own several Wen shop tools, and this table fits perfectly into that budget-friendly, occasional-use category with the others. This table is a good size, and it is very simple to set up and use. The T-track clamps are very useful (if awkward at times). It's made everything I've done on my drill press easier and more accurate. I do NOT regret buying it. But there are things about it that might make others leary.The entire thing is MDF, which isn't inherently a problem, as it's thick and strong, BUT I'm constantly paranoid about damaging it or getting it wet. The stop-block in particular has a lot of exposed edges that lack the laminate. This is probably the least significant issue.There is a ruler, of sorts, on the table. Presumably this is there to help align the fence. Great idea. Except it's a sticker that sits proud of the table and almost immediately got damaged as soon as I started sliding material, the stop-block, and the clamps over the surface. I'm not sure how long the thing will last. (And I'm not sure how useful it is, since it doesn't really register against any specific thing on the drill. It's all arbitrary. Simple white lines painted on the table would have been as useful for aligning the fence. When the ruler inevitably wears off, I'll probably just replace that function with silver Sharpie marks.)The clamps are fiddly. They aren't super-intuitive, and the directions are NOT helpful with how they work (The directions were generally terrible, which is has been true of all Wen products I've bought). Once you figure them out, they work just fine, although they are clunky and a bit on the small side. Useful, but not my favorite feture. I often remove them and just use a Quick-Clamp on the table itself.I've had to retighten the table to the drill press table a couple of times. The clamps that secure it underneath (the same fiddly types as on the top) come loose periodically and will need to be checked occasionally.Overall, It's a simple table, of a good size, and I like it. If something happened to it tomorrow and it broke, I'd definitely consider buying another just like it. I just know it's not top-of-the-line, and figured others might want to know what that means before purchasing.
Rodney R Davis
July 24, 2025
Very easy to assemble and install on my 10" Bauer drill press.It works perfectly and widens the drill pres's work space so I don't need a third arm to work on larger pieces.I highly recommend it.BTW: you don't need a single tool to assemble this on to install it.
Shopper
July 21, 2025
I was just about to start making my own drill press table when I came across Wen’s table on Amazon. This is a great table. It would be very hard to build a table for the price. The build quality is excellent with solid instructions. I am now looking at other Wen products to add to my woodworking shop.
Art B
July 13, 2025
Works fabulous
Don Quixote
July 7, 2025
Even though this was made for Wen drill press, looking at the pictures I took a chance and bought it to see if it fits on my Ryobi drill press. I am happy to report that it fits nicely.This is a very nice looking drill press table, includes a total of 5 t-tracks (two on top to hold down workpieces, two at the bottom and one on the fence), a total of 5 t-track brackets, 3 for the bottom to hold the table to the drill presses own cast iron table. In reality, one can do it with 2 brackets only, freeing up one of the brackets for table top or the fence. The fence is really nice and comes with built in t-track and a nice stop block. The back of the table has a cutout at both sides which is nice because I can still use the crank handle as is.All in all I am very happy with this. There are many YouTube videos showing people making similar tables. It requires a ton of detailed work and it will probably cost as much or even more than what I paid for it and it took me all of 5 minutes to unbox and install.Highly recommend it. Even though my drill press cast iron table was rectangular, like Wen's, I think this will work just fine on a round table as well.
Bella Baker
May 21, 2025
I've been using this for a while now. Best one for the money. I had to peel up the tape rulers because something got caught underneath and started lifting. I'm not the greatest fan of the clamps that came with them, but I would buy it again.
Graham
April 7, 2025
I have been caught out using my bench drill without a table fence and stop. It fits my Rhyobi corded bench drill and does not interfere with the height adjustment handle. It is solidly made and looks great. I like the ability to secure workpieces for safety. It can be easily removed if required. For the price don't bother making your own like I considered as this one is well priced for home use. Recommended. Delivery time was quick.
Peter ORourke
March 24, 2025
I have the King Canada 10-Inch Drill and this table attaches firmly to the drill table. Functions perfectly and looks great. The Crank Arm for the press does not get in the way of the fense so that was pretty important.
ERNESTO K.
January 18, 2025
En general es una buena mesa, no obstante y de acuerdo a mis estándares, tiene 2 detalles que modifiqué:- El inserto central está cerca de medio milÃmetro por debajo del resto de la mesa, tuve que agregar un aumento para llegar a paño- Las 2 cintas métricas transversales Están pegadas por encima de la melamina, tuve que retirarlasEn ambos casos, tales detalles no serÃan significativos si se trabaja con una pieza lo suficientemente grande como para que se “apoye†de forma pareja por ambos lados, pero si se trata de una pieza pequeña, habrá una ligera inclinación con respecto a la vertical y el barreno no será perpendicular a la pieza.
miguel ignacio
December 25, 2024
Fácil de instalar , buen material y excelente para trabajar en el taladro, muy buen aspecto
Roger
December 23, 2024
I was going to make one and it was almost as cheap just to buy the finished product. I have a very old benchtop drill press and it fit just fine.
Recommended Products
$99.99
$ 47 .99 $47.99