Your cart is empty.
Your cart is empty. Here is the most easy and useful way to quickly figure out whether this electronic igniter kit fits your grill as follow:
your Genesis or Spirit grill comes with side-mounted control panel that there is a green igniter button lying on.
Features:
-Innovative Design: This universal igniter kit comes with an upgraded version electronic spark generator that can be matched to both provided metal and ceramic gas collector boxes which one of them is required for installation.
-Easy Installing: With our provided specific installation instructions, it will take you a snap to finish removing the old one from and installing this new ignitor replacement kit on your grill.
-Durable and Efficient: Each gas grill electronic ignition kit has passed igniting test before being listed. Once installing correctly, it will work great to ignite your gas grill in its long-term service.
Part Number:
Replacement for Weber ignitor module part # 1819-51 and 1836-32.
Replacement for Weber OEM igniter kit # 67726, 67847 and 91360
Package:
-Installation Instructions x1
-Electronic ignition module x1
-Ceramic sparking device with electrode and wires x1
-Metal sparker box with electrode and wires x1
-Button caps x2 (one is a present for you)
Please note AAA battery is required but not contained inside.
Grill Replacement Parts for Weber Genesis 300 and Spirit 200 & 300 series models whose gas control knobs are on the side of the grill as below:
-Genesis 300 series (2007-2010) as Genesis E/S-310, 320; EP/CEP-310, 320
-Spirit 200 series (2009-2012) as Spirit E/S-200, 210
-Spirit 300 series (2009-2012) as Spirit E-310, E-320
Please Note:
1. It will not fit any front-mounted control grill or Genesis II / Spirit II series grill.
2. It will not fit any Gold / Silver / Platinum / 1000-5000 or Summit Series grill.
John C. Taylor
2025-07-09 15:51:19
This is a great replacement for the Weber igniter - at a much better price. The installation was super easy, especially after watching a couple of YouTube videos! All you need is a Phillips screwdriver and a pair of pliers to remove the old one and install the new one. Saved a ton of money with this one instead of buying the over-priced Weber igniter.
R. Precourt
2025-06-25 11:52:13
My ignited stopped working and even with some fiddling with it, I could barely get it to spark once or twice. I decided to try this one and couldn't be happier.The instructions are excellent and very well-illustrated. It came with two different types of the spark part, I assume to fit different grill models, and also came with an extra puss button.It was very easy to remove the old one and install the new one. This one installs slightly different into the control panel, in that the old one snaped in and the new one has a threaded nut that secures it. It is somewhat of a pain getting the nut to line up with the threads and go on straight, as they are only on the two sides where the clips were on the old one (you'll understand once you see it.) Wish they had stayed with the clip design, but that also might be so that it fits more models.At any rate, it's installed and works much better than any of the original Weber ones did. The spark rate is twice as fast, so the grill lights faster. Other than that, it looks identical.It was a great value and got my grill up and running again, so I couldn't be happier. Highly recommended!!
lance oneil
2025-06-05 20:08:47
Once I was able to get the old starter out, I had to disconnect the wires from the new starter, and then plug it back in that seemed to be a little trick that should help others. Then connecting the other parts was pretty simple. I find it interesting that they don't have any instruction on the starter that you need a aaa battery and which way the battery goes in? I know that you need a battery to put in. Just keep that in mind once you install. If you don't put a battery in, it's not going to work. But if you do put the battery in, it should work perfectly fine.
Shaun Legacy
2025-05-03 13:59:13
Install was easy. Came with everything needed and clear instructions if you need them. I wish the button was a little more substantial. If feels flimsy as it’s thin plastic. It does come with 2 buttons but I would have happily paid more for a more solid piece but overall this is a good purchase.
bruceb100
2025-04-25 15:43:54
Our Weber Genesis worked perfectly for over ten years until the igniter knob plastic retention mechanism broke. I flat out refused to replace a perfectly good Weber gas grill over a floppy knob. So I ordered a replacement knob but contrary to the item pictured, the one that arrived is for a different model. So I try again from a different merchant... Same problem; pictured is the exact replacement but a knob for a different model arrives. Something funny going on with part numbers? Who knows. OK. Lets just replace the whole dang igniter system that also comes with the right knob. That's what this is and it works perfectly. And HOORAY it comes with TWO KNOBS! :-)
Cmarius
2025-04-14 09:43:39
Our Weber Genesis S-320 natural gas grill has been in heavy use for 16 years. After 5 or 6 years the electric spark system stopped working. Weber provides a little pilot lighting hole in the front and so I didn't bother to fix the system. However, I decided to take a look at my options the other day and found this after-market ignition module. I'm usually not a huge fan of aftermarket for something like this, but I was pleasantly surprised that the fit, finish and build quality were all as good as the original Weber. No tools are required to install this, you just remove the push-button, squeeze the tangs of the switch stem, and pop it out. The ignitor isn't fastened to the burner, it has a spring fit that just slides onto the mount. The new switch has a threaded nut instead of the tangs, but it works perfectly and the knob looks identical to the Weber and sits flush on the surface. I installed a AAA battery and it worked the first click! I wish I would have done this years ago. Very easy to install, OEM quality, good instructions if you need them.
FishTech
2025-03-31 16:03:48
I have a Weber Spirit Special Edition Gas Grill and it is difficult to figure out exactly which parts fit my grill. The original ignitor stopped working and I unfortunately removed it and threw it away before buying a replacement. For those reasons I didn't know which ignitor to buy so I took a chance on this double ignitor kit and the larger ignitor slid right into place. This ignitor uses a AAA battery to produce a spark. The original ignitor was a push button that clicked when you pushed it producing the spark. Time will tell how long the battery works but for now it's better than having to stick an electronic lighter through the side of the grill to light the first burner. I'm glad I bought this unit and I'd buy it again.FYI: I was not compensated in any way for a positive review and I'm not affiliated in any way with the company that sells this kit.
Simon
2025-02-28 15:46:18
The product that I bought was as discribed and worked straight away with no problems
Newbie
2025-02-25 16:45:10
Easy install , it works flawlessly, just perfect.
Luc Filion
2025-02-08 11:55:42
Has two models of igniter, works on all Weber BBQs with igniters.
CanadianMan
2025-01-13 18:48:19
Fits well, install was relatively easy and instructions are easy to follow. One of the buttons it came with would not ignite… thankfully it comes with 2 buttons. Still disappointing the spare button does not work.
frances mcdonald
2024-12-28 18:41:44
Worked well as a replacement - easy to use - value for money
Recommended Products
