Your cart is empty.
Your cart is empty.Dsnaduo 1PC M12x1.25 Stainless Steel Magnetic Engine Oil Drain Plug Fit Toyota--Corolla 4Runner Avalon Camry Highlander Land Cruiser Prius RAV4 Sequoia Sienna Tacoma Tundra Venza Yaris; Lexus--ES250 ES350 GS300 GS350 GX460 IS350 LS460 LS500 LS600h RC300 RC350 RX350 RX450h; Nissan--370Z Altima Armada Frontier GT-R Juke Kicks LEAF Maxima Murano NV1500 NV200 NV2500 NV3500 Pathfinder Quest Rogue Sentra Titan Versa Xterra; Infiniti-Q50 Q60 Q70 QX50 QX60 QX70 QX80 QX56; John Deere Gator; Arctic Cat Oil Tank/Chaincase/Gearcase. Replace 11128-01M00, 90341-12012 With Gasket 11026-01M02 & 90430-12031
Fergdaddy
2025-09-04 17:58:15
Excellent item! Perfect fit for my Predator 9000 generator! Threads match perfect and great machining. Strong magnet. Changed my oil in bright sun when I put in new plug. Could see tiny particles of metal in my oil under the sunlight. Was only my second oil change. Hope this plug catches those particles. This plug is beefier than the factory plug with a slightly larger head(18 mm?). Comes with several spare washers. Highly recommend!
Hilltop
2025-08-30 14:05:52
Quality machining, strong magnet, 17mm hex. Replaced the OEM plug in my Club Car Onward to protect the engine. Came with 3 copper and 3 aluminum crush washers (22mm OD). Made in China.
D M GLENN
2025-08-02 17:03:55
The M12x1.5 plug was a great fit for the generator. Same thread size. It is slightly longer than the original plug. The hex head on the bolt is much larger - 18mm vs 12mm on the original. Quality seems good and it was significantly less expensive than some of the other options.
Richard M.
2025-06-18 16:57:18
Perfect fit for my 2023 Grom. I intend to keep my Grom for a long time, this will help keep it in top condition. Very cheap insurance. Definitely want to keep any steel particles out of the circulating oil. Wouldn't want to be without it. It came with 3 aluminum and 3 copper crush washers (oil plug gaskets). Well worth the price.
TriGuy
2025-05-06 12:02:44
Not sure I needed this but it is a nice plug, came with a few washer options and has a magnet. Will probably grab any flakes that come past it. To be determined at my next oil change.I went with a copper washer, tightened it down and no leaks. So it does what it is supposed to do.Not sure I need a stainless oil plug but it does look nice. The head size is larger than OEM, so you'll need to take note of that when you install it and for your next oil change. This one I believe is a 17mm.
Manny
2025-03-15 12:54:25
This is a really nice stainless steel plug. The magnet is very strong and wanted to pick up anything it could get close to, even with the protective cap on. The head of the bolt for your wrench is much larger than the factory one, which makes tightening and removing easier. It also comes with six washers for future oil changes.
Robert
2025-03-10 13:08:22
The oil plug that came with our 2018 Subaru had a 15 mm hex head and our friend at the lube center managed to round off the head . I don’t blame them as the part was inferior to start with ( like their batteries, brake pads and tires). Downside is the magnet is very strong and will require a small amount of diligence to get the steel crush washer (one such supplied) to stay put while threading it on. They do supply a couple of copper crush washers which don’t suffer from attraction. Ther are also two neoprene washers which don’t seem to fit this plug? The 17 mm head should last a while, I hope.
algreen
2025-02-18 15:11:14
Works. Comes with many washers.
Recommended Products
