Your cart is empty.
Your cart is empty.Product Description
EWANYO 340W 3-Speed Mini Drill Press Bench
A nice item to your workbench
Drill presses are ideal for making holes into whatever material you’re working with, be it wood, metal, or plastic. Sure, you could use your trusty handheld drill but the results you’ll get won’t be nearly as neat or accurate as using this drill press. And who wants to be a reckless amateur? This benchtop drill presses provide most of what larger table drill presses can offer in a smaller package. They can save a tremendous amount of space in a shop. Placed on a workbench, a benchtop drill checks off many of the boxes any handy person needs.
Details
High quality drilling, easy operation, good stability
With speed regulating switch, speed can be adjusted easily.
Great speed, low noise, long life drilling no swing, drill breakage rate is very low, high efficiency.
Mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling.
Can also be used for DIY furniture, work easily, drilling holes more accurately
Specifications:
Clamp Diameter:1-10mm
Drilling Diameter: 0.6-6.5mm / 0.02-0.26inch
Rated Input Power: 340W
No-load Speed:
I:0-8000r/min
II: 0-11000r/min
III:0-16000r/min
Max Stroke: 25mm / 0.98inch
Weight: Approx. 5542g
Table Top Size: Approx. 17 x 17 x 38cm / 6.69 x 6.69 x 14.96inch
Features:
- Saft but powerful device for DIY lovers, mainly used for wood, plastic plate, a resin plate, aluminum, composite panels and another non-hard material drilling.
- Small in size, you can easily find a place to work with it and easy to travel
- High quality drilling, easy operation, good stability.
- Great speed, low noise, long service drilling life, drill breakage rate is very low, high efficiency.
- With speed regulating switch, speed can be adjusted as need.
- Can also be used for DIY furniture, work easily, drilling holes more accurately.
Al Broussard
August 10, 2025
small , but that's what I wanted, very usefulcomes with extra drive beltworks well so far, it looks like it will last me for ever
Caroline
July 8, 2025
I bought this as a birthday present for my husband. He likes it and is happy. That is all I can honestly say about this product as I have not used it myself. Would buy again, but who needs two drill presses?
Customer
June 6, 2025
I put this one to work the first day I got it. Completely satisfied, it's not a heavy duty drill it's for small light work.
Have a good day !!
May 10, 2025
I can’t get the table to the 90° with the drillbit at all.There should be adjustable set screws around the mounting postOr better yet it should’ve been clamp on just like the drill body hasThis will work fine on junk work, but that’s about it
Kathryn
May 5, 2025
I wanted this to work so badly for my space. Loved size…Hate Quality. Handle will not screw in because it was not tapped. 2nd time using chuck fell off and went flying.I was going to live with no handle and use screw driver but….when major things started flying off…that was it! Returned!
Walter
April 29, 2025
Great product to use for small wood projects.
Richard Lind
April 6, 2025
Nice small drill press but with lower speed you lose power to drill
JG44070
April 2, 2025
Has USA plug but 50 hz but doesn’t seem to matter. Stated spec of 0-8000 low speed is not accurate. 0 with power shut off but adjustable range maybe 4000-8000. Seems way too fast but it should work for my application.Revision: if you take the two screws out holding the speed controller onto the drill, there is a trim adjustment on the circuit board. Use non metallic screwdriver. Turn full ccw, turn drill on, adjust speed adjustment and around mid point drill will start to move. Adjust main control adjust all the way slow, ccw. Now slowly turn trim adjustment cw until drill moves at your desired slow speed.Drill is now usable with this adjustment. Mine may have just been misadjusted from factory.May change speed controller to make it more reasonable.Chuck quality decent. Build quality decent. Speed is my only concern. Comes with spare belt and set of brushes for motor.
Jin Chen
March 22, 2025
Good
John W.
February 25, 2025
Great little drill. Good price and excellent delivery. Unfortunately I can see no way to adjust the depth of drilling other than raising or lowering the whole drill/motor assembly (which is heavy) on the support column. There is a graduated wheel on the operating handle spindle which has an Allen key nut presumably to aid in adjusting the depth of the drilled hole - but it doesn't...... Actually it is a pity because it really is a nice little tool. For this reason, I wish that I hadn't bought it!
Customer
February 20, 2025
me semble correct pas essayez encore
Philip Catalfamo
February 12, 2025
overall badly made
Jack Le
January 28, 2025
Be careful of the chuck, even when u hammer it in, at load and high speed, it will fly out and can cause serious injury.Other than that, the built quality is decent, the motor runs smoothly. It only go down maximum 4 cm, which not very useful.
Recommended Products