Your cart is empty.
Your cart is empty.Product Description
5" Diamond Grinding Wheels, 12 Turbo Segments, 5/8"-11 Threaded Arbor
Diamond grinding wheels designed for fast grinding with a smooth finishing. Ideal for general purpose applications on concrete and masonry, including grinding, cleaning, leveling or coating removal.
- Grit Size/Bond Type: #30/40 grit with medium bond
- Segment Type: 12 turbo diamond segments
- Arbor Size: 5/8"-11 threaded arbor
- Equipment Type: wet or dry with angle grinders
Applications
Concrete Grinding
Designed to grind concrete
Concrete Cleaning
Designed to clean concrete floors or walls
Concrete Leveling
Leveling stain layers or old paint
Coating, Mastic, Paint Removal
Removes thin layers of coating, mastics or paint
Ross Bertram
August 12, 2025
They worked perfect
Jose ovalles
July 29, 2025
Works amazing!! Makes the job easier..
Juno Fairbanks
July 22, 2025
This wheel did a quick and smooth job of grinding down a concrete walkway where it was pushed up from winter freeze, stopping the gate from opening. It is priced fairly and shows very little wear after first use so it should last a long time. Very pleased.
ExtremDIY
May 14, 2025
The media could not be loaded.
E. Taylor
May 7, 2025
I needed to level out the concrete outside a garage door. I got this and attached it to my angle grinder. It works great. It removed exactly what I wanted it to and with varying pressure it can remove a lot or a little. I am very pleased with this grinding wheel. It looks like it will last a long time with little to no wear after completing my project.
Tom S.
March 25, 2025
I had some areas of my driveway where the top surface had spalled, leaving exposed aggregate. I followed YouTube videos advising a broom finish and did not like the results (I previously just trowled the finish and it was fine). This tool was my solution to fixing the problem and got a nice, smooth finish. I then used it to fill small bird egg-sized holes in the driveway. I just applied some mortar with little attempt at trowelling. After hardening I ground it down smoothly with this tool - easy, peasy! If you have raised concrete slabs this tool can cut them down to eliminate tripping hazards.
Franklin S Collins
March 3, 2025
This is a great wheel for grinding concrete. I can use my 7in grinder with one hand at 11000rmp. Perfectly balanced wheel. I’d buy another. It cuts into high strength concrete. Perfect for leveling my workshop concrete floor for door installation.
A. Carey
January 20, 2025
I had to grind part of my basement floor to level before putting engineered wood flooring down. I first bought a name-brand bringing disk from a local bigbox store. That one cost about 3X more and sucked. I worked hard but made little progress. Then I decided to buy this one. It worked great. It was easy to control the grinder and it worked quick and evenly. I wish I had purchased this one originally. The only (very slight) drawback is that the holes in the disk where the anger grinder wrench fits were a bit smaller than the spread on my wrench. I still was able to secure the disk and remove it, but that took a bit more effort than I expected.
David Jean-Gagnon
January 18, 2025
Nous utilisons très souvent ces disques et ils sont dans les plus résistants de l'industrie. Très bon achat! n'hésitez pas à acheter ce produit, il vaut son pesant d'or!
Recommended Products