Your cart is empty.
Your cart is empty.Product Description
WENORA Stripping Discs are Ideal for Cleaning, Stripping And Surface Preparation
●Suitable for 4" angle grinder.
●Easily removes paint, rust, and scale.
●For polishing and grinding metal, plastic, wood, concrete, stone and other surfaces.
R. Ross
September 7, 2025
I had a rusted wheelbarrow interior that needed to be sanded down and prepared for painting. I first used a Nylon brush on my angle grinder, but that wasn't abrasive enough for the tougher rusted areas. So I purchased some flap sanding disks and these WENORA Stripping Wheels. After assessing the wheel barrow's sharply curved interior corners, I opted to try these stripping wheels first.I had been warned by another review about the depth of the wheels and the inability to reach the nut tightening holes with the standard spanner wrench. What had not been mentioned was that the depth at the outer diameter could interfere with my angle grinder's outer shield. At first I thought I was going to have to send them back, as they wouldn't fit within the shield to allow them to be tightened onto the spindle. However, I pushed and tugged and got one on, and decided to try turning on the angle grinder to see if it would turn OK and maybe grind off the wheel where it interfered with the shield. Bottom line: It quickly ran in and worked great to sand down the rust in the wheelbarrow interior. I don't think the sanding disks would have worked nearly as well.When it came time to remove the wheel, I didn't use the spanner wrench, but just torqued the wheel itself to loosen it...it came right off. No issues. I've attached images of the wheel as-new and after sanding the wheel barrow. One can see the tight fit with the shield...but it all worked out and worked fine. Used just this one wheel for the job...still in good shape for future jobs. The nylon brush was destroyed by the wheelbarrow job...had to throw it away.
richard ingram
August 7, 2025
Been trying to remove power coat with paint stripper on some metal parts I got from an old treadmill. Works but takes a long time. I have a angle grinder with sanding disk but it doesn't work well. These things are amazing!! The disk cuts powder coat off like butter. I couldn't believe it!! Buy them.
DAVID WATSON
July 17, 2025
This product does the job well. Be sure to use all safety precautions.
Jim
July 3, 2025
More agressive then I expected but does work well. They do tear if you catch it on an edge.
Henry
June 23, 2025
Great performance, outstanding wear resistance. Removes material really well.
Sparky
May 16, 2025
I was looking for a way to just strip loose paint from my fascia on my house and someone recommended these. They blew through the paint ridiculously fast. While I was only looking for something to remove the loose paint, these removed all of it faster than any other method I have ever tried. Since then I've used them around the shop for removing rust and paint on metal before welding and they work amazing on that.
Dixie P.
May 13, 2025
I wanted to use these to clean paint off of patio blocks.They work relatively well but left.Purple purple streaks on the blocks . The replacement brand that I got worked better and lasted longer.
Sam Kuhlber
May 3, 2025
Must have for any shop. I use these for everything gaskets paint rust you make it it eats it! Must have worth every penny.
mike reid
April 12, 2025
Blows through paint like crazy.
The Bears
February 28, 2025
Had to refinish 3 older style metal garage doors that had been painted. These worked very quickly to remove the years of paint build-up down to bare metal. Highly recommend.
Vik
January 11, 2025
Works for me
David_W
December 27, 2024
Item description stated maximum speed of 12,500 (R.P.M).Images in ad showed speed rating of 13,300 RPMReceived item which displayed a lower speed rating of only 11,800 RPM.
Dennis Betts
December 21, 2024
Good metal finish after welding and using blending disc
Recommended Products