Your cart is empty.
Your cart is empty.Product Description
Nicholas Knight
2025-09-05 15:38:43
These work great and sizing is perfect for the hitch.
AlexS.
2025-07-06 10:53:56
I used two large and one small silicone shim for my B&W MultiPro hitch. It was a snug fit so I put a large screwdriver in one hole and pried the other side into alignment so I could get the trailer pin started. Once it was started I easily tapped it through to the other side and put the lock on it. Not only will it make it difficult to steal my B&W hitch but it also stopped the rattling. A hitch >$350 should come with shims like this.
Clinton Walker
2025-06-14 21:42:38
I used 2 of the thicker bushings for my hitch receiver. It was slightly too big, I had to push the hitch forward while pressing the pin through. Fits very snug now. I'm using the 180 Aluminum adjustable drop hitch.
Rose
2025-06-09 13:11:27
I would recommend this item for smaller vehicles that are not towing a heavy load. I tried this on my diesel truck and it ended up working on my gas truck. Durable material just not for me, but I would still recommend it to anyone else.
chris sells
2025-04-21 19:16:07
The fact that you have multiple sizes, choose the one you need and install, I’m not hearing rattling back there. Works proper.
Customer
2025-04-18 18:14:29
Updated:First vehicle I tried this on it didn’t fit well and did nothing for the rattle. I ended up getting a u-bolt anti rattle bracket which fixed the rattle.Second vehicle had a shallower receiver so the u-bolt bracket was difficult to position and might slip during travel. I used these spacer on the hitch before/after the u-bolt and they worked great as a spacer. They don’t squish/compress much, but just enough that they didn’t get in the way from tightening down the anti-rattle bolts/bracket from another company.Initial review:I was hopeful that this product would work. But it doesn’t do anything to help. I can still cause our hitch to rattle with the weight of my foot pressing back and forth. Maybe if your issue is your hitch is sliding in and out of the receiver tube and clanging against the pin these might help by limiting its travel. But the hitch pin should keep that to a minimum. In our case the receiver tube isn’t a snug fit so our rattle is from left/right/up/down wiggling. Our weight distribution hitch also doesn’t have a flat end to press firmly on the wedges - it’s a small angled lip, also limiting the effectiveness. Although there were two sizes (whole and half thick) in the pack, we needed closer to 1-1/3 wedges since 1 1/2 doesn’t compress. If this product had a small lip which went into the receiver tube it might have worked, but as is, it’s simply a waste for our our purpose.
Kindle Customer
2025-02-10 18:22:36
I like how the quality of the build is. So far the hedges have not torn it apart.
Robert Bearup
2025-01-19 10:29:23
Nice
Recommended Products