Shopping Cart

Your cart is empty.

Your cart is empty.

64mm Oil Filter Wrench, Drain Hose & Engine Oil Funnel for Toyota, Lexus and Scion 2.0-5.7L Engine Cartridge Style Oil Filter Remover Tool

Free shipping on orders over $29.99

$59.99

$ 25 .99 $25.99

In Stock

1.Size:64mm Oil Filter Wrench


About this item

  • Complete set: The oil filter wrench set comes with a Toyota oil filter wrench for removing filter cover, oil filter drain hose for pre-removal drainage, and hands-off Toyota thread drain funnel for engine refilling
  • Wide Compatibility: The filter wrench is compatible with all Toyota and Lexus cartridge style oil filter covers, suitable for 2.0 L-5.7 L engines, and fits models such as Camry, RAV4, Tacoma, Highlander, Sienna, 4Runner, and more
  • High-Quality Materials: The oil filter removal tool is made aircraft aluminum for removing the filter housing cover. The drain tool is crafted from pure copper using CNC machining, and the hose is made of silicone material, allowing for quick draining
  • Precision Engineering: Enables quick and easy removal and installation of the filter housing, while the draining tool makes the oil change process cleaner, and the funnel facilitates efficient new oil refilling, freeing up your hands
  • Excellent Customer Service: We provide comprehensive customer service to ensure that you can get timely and professional solutions to any problems you may encounter during use



Product Description

PESIKO TOYOTA Oil Filter Wrench, Engine Oil Funnel and Drain Hose

engine oil filter wrench

PESIKO TOYOTA Engine Funnel

engine oil fliter wrench

Easily Remove Toyota and Lexus Filters with Ratchet Wrench

oil filter wrench set

Used with a 24mm socket or a 3/8" drive ratchet for convenient installation or removal of the oil filter.

Copper Oil Drain Screw Extended Anti-freezing Silicone Hose

drain hose

Operational Steps:

  1. Use a wrench to remove the gasket from the oil filter.
  2. Connect one end of the drain plug to a hose and screw the other end into the thread of the oil filter.
  3. Adjust the valve on the drain plug to allow the waste liquid to drain out through the hose.
  4. Once the waste liquid has been fully drained, close the valve and remove the drain plug.
  5. Use a ratchet wrench along with an oil filter wrench to remove the oil filter.
  6. After removing the oil filter, drain any residual oil and replace the oil filter cartridge.
  7. Use the ratchet wrench and oil filter wrench to install the new oil filter.
  8. Open the oil filler cap, screw in the oil funnel, and pour new oil into the funnel until full. The operation is complete.

Suitable for 2.0 L, 2.5-5.7 L Engines with Cartridge Style Systems

oil filter wrench

It fits a wide range of models, including Sienna, Tundra, Camry, Highlander, Corolla, Camry, Tacoma, RAV4, Avalon, FJ Cruiser, Venza, Sequoia, Pruis and more.


Joseph Vitale
2025-08-27 10:45:59
A great tool that works. The area to remove the filter is very tight to work in and this tool gets in there and makes the job simple. Well wroth the cost to save time and do a professional job... Saves time and does exactly what it meant to do.
M. Ein
2025-06-19 15:03:06
I saved so much time using this filter wrench compared to my older one. The older one would not grip well due to the socket wrench pin extending into the opening. This one fits over the filter housing perfectly and easily loosens it. I wish I knew about this 4.5 years ago. I also like the that it’s thick metal so I imagine that it will last for many years.
Sheet Metal Slayer
2025-06-14 18:55:38
High quality
MPG
2025-06-01 11:01:30
This is the right one. No need to look any further.Was able to take off the filter easily on a Toyota Sequoia and Avalon. the tool fit the filter housing perfectly.
NoHairPapa
2025-03-21 17:18:07
You asked too soon. Have not had an opportunity to actually remove an oil filter with it yet.But it looks very well made and it fits very snug on a new Toyota filter.
Fred Yanner
2025-03-08 16:19:27
This Pesiko Oil Filter Wrench easily dismounts after use from my Lexus RX350 oil filter housing.
timmy
2025-02-10 10:20:22
Better than most for lexus oil filters however it is a very tight fit. I had to tap it on lightly with a mallet for it to fully seat
Rad
2024-12-22 14:45:50
Purchased for my wife's 2018 Highlander and my first oil change was a breeze with these. Seems to be of great quality and the price was better than competitors.
Graeme
2024-12-10 13:20:23
Not only is this an extremely high quality tool, but it looks great! This wrench is a perfect fit for the WIX 51358 and factory Nissan filters on my 2024 Sentra SR. It is certainly more expensive than other filter wrench options, but I would say 100% worth it. Just get it, you won't be disappointed.
Recommended Products

$19.99

$ 8 .99 $8.99

4.5
Select Option