Your cart is empty.
Your cart is empty.Product Description
The Small Mandrel has a small at its tip so that it can be used with emery and fiberglass cutting wheels, sanding discs and polishing wheels.
Power Tools and Accessories
Shank with screw head
Use with discs and wheels
Plenty of shank for the collet or chuck to hold onto
The mandrel design simplifies the process of changing cutting wheels, buffs, and detail abrasive brushes (1/8" shank.)
Ideal for the thicker cut-off and grinding wheels. Can be mounted in most drills and die grinders with 1/8" collet.
1/4" hole DIA!!
Customer
August 22, 2025
Purchased these so that I could use a set of small rotary saw blades made for use with Dremel tools. However, the blades have 1/4" holes in them - too large for a Dremel tool shaft. Saw these on Amazon and bought this set. They work great! Others talked about the shafts bending. The most important thing is to make sure that the shaft is fully inserted into the Dremel tool and that you only use very slow speeds. When inserted into my Dremel tool, hardly any of the 1/8" shaft can be seen. That is very important to keep from experiencing any bending of the shaft as others have apparently experienced.
Wylie Wiggins
July 18, 2025
These aren't any hardened rugged machining type metal construction, but they're not commanding that price range either.From abrasive grinding and cutting with cutoff wheels to HSS blade cutting, these have done fairly well for the price, just don't push them too hard.The picture is of a Micro Fit Molex pin remover tool made from a cheap little screwdriver for fabricating custom computer cables, the tool was made with these arbors and cutoff wheels.
Vulkrider
June 21, 2025
At this price, buy the 6. tightens well and a snug fit to my cut off disks like the original Dremel.
Graciano Batista
May 17, 2025
excellent
Matt-from-AL
March 23, 2025
The top screw size limits it’s usability but if all you use is cutoff wheels then it should work well for you.
Stan the Handyman
February 3, 2025
If you do any work with a rotary tool, I probably don't have to tell you that you need these,so I won't.They do what you need them to do.
doni
January 4, 2025
Always need spares, will come in handy.
BMoore
January 1, 2025
Nice little mandrels, but the supplied screws are too short. I have some longer M6 machine screws on hand so it is no problem for me, but they should include some longer screws.
Roberto Gimenez Martin
December 29, 2024
ok
José Ruiz Núñez
December 27, 2024
es de utilidad
Ãngel
December 3, 2024
Dos estrellas por culpa de la entrega.Estos mandriles para miniamoladora (tipo Dremel) están muy bien. Tienen un mejor acabado que los que vienen con la propia máquina, una calidad algo mejor y se nota que son más robustos. Por lo menos no se doblan cuando está usando un disco de corte para madera de 50 mm de diámetro. La inercia que genera ese disco tan grande, hace que si el mandril no es de muy buena calidad, se doble en cuanto se enganche el disco. En ese sentido tengo que valorar a los mandriles con 4 ESTRELLAS.Mención aparte es la entrega. Bien es cierto que cuando pedà los mandriles, se especificaba que la entrega serÃa el 28 de octubre. Yo los pedà en la última semana de septiembre, pero como no me corrÃan prisa no me importó demasiado. Pero es que llego el 28 de octubre y todavÃa no habÃa recibido nada. Llegó noviembre y nada y al final, cuando ya estaba a punto de reclamar dónde estaban mis mandriles, al abrir el buzón el pasado dÃa 7 de noviembre, me encuentro dentro un paquetito que eran los mandriles. Ni siquiera me enviaron un correo o un aviso indicándome que lo habÃan depositado en el buzón. Por lo tanto, en lo que se refiere a la entrega, no puedo dar más de 1 ESTRELLA.Resumiendo: El producto muy bien (4 Estrellas). La entrega muy mal (1 Estrella).
Recommended Products