Your cart is empty.
Your cart is empty.Product Description
AYAO Woodworking Supplies - Specialise in Bandsaw Blades and Timbers
We produce all the blades in our own factory, where we have decades of experience in bandsaw blade manufacturing. Our continuous focus has been on enhancing the performance and lifespan of the blades. Over the past few years, we have made significant improvement in blades' sharpness through the implementation of the ground teeth method.
Try our ground teeth blades and feel the difference!
These 93 1/2 inch bandsaw blades fit 14" Delta/Rockwell, Jet, Rikon, Steel City, General, Ridgid, older Sears Craftsman Grizzly, Bridgewood,Woodtek band saws and others that require 93 1/2 bandsaw blade.
AYAO Bandsaw Blades
Premium Material
All AYAO band saw blades are made of high quality carbon steel, ideal for wood or general purpose cutting.
Unique Welding
Strong and smoother welding point to maximize performance.
Racker Teeth Set
All teeth arranged evenly for better cutting result.
How to choose the right bandsaw blades
- The narrower the blade in width (or depth), the tighter the cut radius possible and therefore, it's more suited to curve-work.
- The wider the blade, the easier to maintain a straight cut and therefore more suitable to straight cuts and resaw work.
- The less teeth per inch, the more aggressive the cut, more effective the chip/swarf clearance, and is therefore more suited to deeper stock or cutting with the long fibres of the grain.
- Curve-cutting blades often have six or more teeth per inch. The more teeth per inch, the smoother the finished cut and less tear out when cutting across the grain.
Customer
2025-08-23 15:02:32
Previously I use to purchase band saw blades from a well known manufacturer only to find them snapping prematurely at the braze joints. So I decided to try these blades and have found they to be extremely sharp cutting thick hardwoods with no issues, long lasting and easy to track at a much lower price. Great product at an amazing price!
Ronald C.
2025-07-23 18:31:13
These blades work great, good price!
Rich in SLO
2025-07-18 17:37:16
These blades were improperly coiled to make them fit into a plastic bag that was too small. As a result, they have kinks in the blade that will cause them to wobble when mounted on the bandsaw. I have tried to straighten the bends, but I can't smooth them out perfectly. Wish I had taken a pic so you could see what I mean.Massive amount of oil covering the blades. Yes, they are carbon steel so they can rust, so I understand the need for a light coat of lube, but this was ridiculous.On the plus side, the welds are amazingly clean. (But makes me worry if they will hold up.) I haven't used a blade yet. If my opinion changes, I'll update my review.UPDATE: I've used one of these blades and it cuts like a champ. The kinks in the blades seem to have worked themselves out. Weld is holding so far. This blade is on a Jet bandsaw in use at a MakerSpace, so it's not getting pampered. Upped my rating to four stars (packaging and excessive oil still an issue.)
Phil V
2025-07-13 13:25:53
I found these blades have a very thin kerf over standard band saw blades which makes effortless scroll cuts.
col
2025-07-12 19:11:20
great product
John Kessler
2025-06-01 10:09:55
Seems like a great blade. Cuts great and hopefully will last a long time.
Mountain Man
2025-05-27 17:26:20
These band saw blades fit my old 1984 Grizzly bandsaw. Good general purpose blade for this size machine at a good price. Bought two more for my Son.
Kenny Barnette
2025-05-17 18:18:53
Good item will order again
Michel Villeneuve
2025-03-22 18:28:49
Correct
Mike
2025-03-03 17:08:44
I purchased these to fit on my 14" Delta Bandsaw. I have purchased other more expensive brand name blades and I always find them breaking at the weld joint area after only a few minutes of use. This blade has lasted far longer than any of the other blades I have used. It cuts nice and straight and the weld area is nice and smooth and hardly needed any dressing before using. I have already order 1/2" blades to go with these. The only issue I have is the way the company folds its blades for packaging. The blade comes out of the package with a tight bend and this needs to be straightened before use. they really just need to coil the blade the normal way evert body else does to eliminate this problem.
Bill Vowles
2025-01-22 16:02:01
At first glance the blades appear to be a good quality, although the thinner blade arrived with a kink due to poor packaging. We were able to straighten out the blade and so far it seems to be working ok for what i needed it for. (would have cost me more to package and return than it was worth so figured we would try to straighten it out). Overall i think i would buy these again.
Isabelle
2025-01-15 11:57:48
J ai acheté ces lames pour coupé essentiellement de l aluminium ! Comme vous le constaté sur les photos elles coupent bien ! C est une plaque de 1/4 de pouces ! J ai coupé aussi un morceau de bois pour montré la courbe que la lame est capable de faire ! très satisfait !
Robert
2025-01-10 16:55:42
je n'aime pas l'épasseur de la lame.
Recommended Products
$44.92
$ 22 .99 $22.99
$29.99
$ 14 .99 $14.99
$20.99
$ 9 .99 $9.99