Your cart is empty.
Your cart is empty.Product Description
Variable tooth pitch, combined with high speed cutting edge, delivers a blade that has high resistance to heat, wear and shock, for a larger range of applications over a standard blade.
From the Manufacturer
MK Morse Bi-Metal Master Cobalt Blades. These premium blades feature Matrix II cutting edges and the longest life compared to any competitive blades. Variable pitch teeth reduce vibration. Packaging: 3 blades per box, 20 boxes per carton. Length: 44-7/8" X 1/2" X .020" (1140mm X 12.7mm X .50mm), TPI: 14/18, Set: Wavy
William M. Johnson
2025-09-04 16:23:25
Only got a few cuts with this so far. However it cuts clean and fast and seems much more durable than the Milwaukee blade that came with the saw. I will update this review with the blade life as I use it more.
Ricky
2025-08-26 19:27:55
They seem to work just as good if not better than the milwaukee blades. So far no issues and these were the cheapest available at the time. I've been cutting miters and square cuts and they haven't thrown any teeth. Overall very durable. They fit just as they should on an M18 fuel portaband.
Discoveror
2025-06-01 14:18:27
Truthfully, I was thrilled ... with how amazingly well these worked. Please let me explain.Being new to bandsaws, I was VERY apprehensive about their power and potential danger. I was as diligent as I knew how to be ... in SOLIDLY locking down the workpiece. I carefully mounted the blade and started the saw at its LOWest speed, driven by this 10 amp motor - to be sure that the blade settled around its drive wheels and guides. Only then, did I dare increase the speed to #2, gently holding the blade against the flat, broad side of the workpiece, flat steel (3/16" thick). The blade started - without any of the jumping that I had feared. I applied NO pressure, barely using the weight (16 lbs) of the saw ... on the cut.In hardly a minute or two, it was done. To my amazement, the cut looked polished ... it was SO smooth - FAR better than I had expected or hoped.Delighted with the success and results, I've since tackled 3" angle iron ... again 3/16" thick. Though I didn't clock it, it couldn't have taken 5 minutes. You couldn't get the cut edge smoother with a file!On one piece, the cut-off failed to fall to the floor ... and I let it keep cutting - to finish getting through. To my amazement, I discovered that, rather than cutting through, the blade had started to cut into the hanging cutoff and had started a little channel - smooth as could be! I was astonished. I had no idea that flat steel could be cut so smoothly or easily.Were my expectations met? I am tickled silly ... even at #2 (the second slowest speed) these blades work GREAT!
Alfredo
2025-05-03 13:24:25
Excelente
Bill Clancy
2025-05-02 11:02:06
I'm a hobby knifemaker, and I use a milwaukee band saw mounted in a swag offroad table to cut sheet stainless steel into shapes before I heat treat. I cut between .90" and .1875" in thickness. The difficulty is that I use high quality "Supersteel", such as CPM S35VN, Magnacut, Elmax, CTS-XHP, CPM154...all wear resistant stainless steels. All in all I get a good run out of a blade, before I somehow tend to break them. It starts with a mild bump, then gets progressively louder till it breaks. I've learned to catch it as it's cracking, then swap out to a new one. I probably get a dozen or so knife blades cut out from each saw blade. I also cut handle materials like Micarta and G-10 which are horrible on saw blades.
Rob
2025-04-19 17:06:39
Nice smooth fast cut. Very fast shipping
alice j hahn
2025-04-18 13:37:03
it is used on my husband's band saw. they were ordered so he has extra ones
Mary S.
2025-04-17 11:43:02
Liked because always work great in industry, bought for personal use in this case.
John Clarke
2025-02-11 11:35:13
The factory weld joint is much more durable then the Milwaukee blades.
Northern logger
2025-01-24 14:33:04
Work like they should and the weld is better than the Milwaukee blade I had that always jumped every round.
Jaime Vidales
2024-12-10 13:33:30
Cumplen con el proceso de corte para el que se compraron. Las uso en una sierra portatil Bauer.
Vladislav Vidakovic
2024-12-06 15:09:25
Fast and clean cuts
Bruce Blanchette
2024-11-25 18:10:43
More durable than name brand competitors
Recommended Products
$29.99
$ 12 .99 $12.99
$29.99
$ 14 .99 $14.99
$38.49
$ 16 .99 $16.99