Your cart is empty.
Your cart is empty.Product Description
BNTECHGO 18 Gauge Ultra Flexible Soft Silicone Rubber Copper Wire,Silicone Wire Spool kit 10 Colors
- 18 gauge silicone wire spool: 10 colors,red, black, blue, white, yellow, green, orange, pink, purple and brown,each color 25 ft,total 250 feet.
- They are constructed with premium silicone rubber insulation.
- Tinned copper wire, protecting them from corrosion and making it easier to solder
- 10 colors jacket for easy polarity identification.
Long Life Of Tinned Copper
High strand count copper core,18 AWG silicone stranded wire has 150 strands 0.08 mm tinned copper wire, tinned copper wire, protecting them from corrosion and making it easier to solder.It adopts intertwist winding technology,The wires are tightly twisted together to reduce signal interference and improve conductivity.High Quality Ultra Flexible Soft Silicone Rubber Copper Wire!Super Low Impedance,Highly Efficient!
Features：
Ultra Flexible
They are constructed with premium silicone rubber insulation.strong toughness and can be curled arbitrarily not easy to break, suitable for various work.
Security And Reliable
Uniform thickness, low eccentricity, It can effectively prevent current breakdown and Ensure the safety of electricity use.
Low Temperature Resistance
Winter is also soft.In the extremely cold - 60 degrees C, also can work normally, does not affect the conductivity.
High Temperature Resistance
They are constructed with premium silicone rubber insulation. It has flame retardant and insulating properties.High temperature resistance 200 degree C.
Look At The Voice From The Buyers
Our products have been highly praised by customers since they came into the market.Our products have many specifications,There will always be one that meets your needs.
Application Scenarios
BNTECHGO silicone wire are widely used for model planes,model cars,model ships,batteries,lamps,household appliances,electric heating appliances,meters,instruments,motor lead wire and digital fields.
reppdog
2025-09-07 16:14:26
Extremely flexible fine wire, easy to strip and has temp resistance and gauge size on the colors. The colors are bright and perfect for helping me color code during wiring.
Big Dilf
2025-08-30 11:51:40
The wire is of very good quality. Nice and flexible insulation that does not burn easily. The 22 AWG wire worked very well for my 2.54mm Dupont connectors. I had to play with my crimping tool a bit to get the pins to easily slide in. If I had to go back, I would buy 24 AWG wire. Regardless, these worked great. I like the selection of colors. The only qualm I have is that the brown is too similar to the orange (for my eyes & in my lighting conditions). I wish the brown was a bit darker.
Philip J. Balcar
2025-08-12 10:02:06
Let me tell you about the 24 Gauge Silicone Wire Kit - it's been an absolute game-changer for my 3D printer setup!I needed to extend the wires for my printer to mount the main board outside of an enclosure, and this wire kit was the perfect solution. The multi-colored wires made it easy to keep track of everything, and the silicone material is super flexible and durable.Installation was a breeze - I simply cut the wires to the length I needed, stripped the ends, and connected them to my printer. The silicone insulation is heat-resistant, which is a big plus for 3D printing applications.Since using this wire kit, I've noticed a significant improvement in the performance of my printer with the lower temperatures. The wires are sturdy and reliable, and I have peace of mind knowing that my setup is secure and well-connected.Overall, I'd give this wire kit five stars without hesitation. If you're looking for a high-quality solution for extending wires in your 3D printer setup, look no further - this is the kit for you!
kram1961
2025-08-08 13:58:20
Love the flexibility and tinned conductors, but like with most silicone anything, the outside diameter is bigger than standard 18 gauge. Makes it kind of annoying when stripping the wire and/or crimping terminals. All of their wire is like this, but it's good stuff other than that.
Papermaker73
2025-08-07 14:51:02
We used up most of the first batch on a motorcycle wire harness, and it was great! The flexibility of this wire is wonderful and it’s easy to work with. Highly recommended!
Ockham
2025-08-05 11:17:59
This is a nice wire to work with. It has that soft silicone jacket that seems to be the rage these days. The wire itself is very fine stranded, which makes soldering a joy. The silicone jacket is very easy to strip and the colors are unique enough to be easy to spot in a complex hand wired harness. This wire is rated at 600V, which means it is o.k. for use in most vacuum tube amplifiers (not HAM stuff, but audio stuff, where voltages don't often exceed 600VDC.)I do wish the manufacturer offered a 17 color version, or a striped version, as ten colors rapidly runs out.Other than that, a nice bunch of wire. I'll be using it again. 20 gauge is real nice for point to point vacuum tube amp work.Five stars. wish it had more colors. Also, missing gray...which is a mystery to me...but still five stars.
DanF
2025-07-26 14:15:16
Love the fine stranded wire & tinned copper solders easier than anything else I've worked with. Still I mostly use crimp-on connectors and it's still great for those. The only unfulfilled wish I have is that its colors matched standard automotive primary. The red and black are ok, but the other colors, while they can still be recognized as the automotive primary colors, they are really different. That's very minor though - still a 5-star product.
Jason
2025-07-21 15:10:55
Bought this for my Jegs Dash Gauges I made for my 91 S10- worked fantastic. - IG Supreme _ Teg to see final product
Old and Stiff
2025-06-29 12:32:52
18 and 20 and 22 AWG orders.A great set of spools of wire.The quality is very high.The covering is very soft and very high heat resistant, very solderable, and the silicone covering never melts or moves.The copper strands are very soft, and very solderable with a flux. This wire also takes solder well at low temperatures.Lots of colors too. Not bright colors, but all are very distinct.The spools themselves are also high quality and they are shipped as full as you can possibly fill them. First thing I noticed .. is how heavy the package is when you pick it up !Overall .. this
Louis-Georges Dionne
2025-06-25 12:53:57
Using it in miniature electronic projects, the flexibility is great and allows wires to go where needed
Rich Rootes
2025-06-01 16:59:42
Very nice silicone sheathed wire - colours are slightly muted, but not an issueAlready completed one Tonearm, there will be many moreJust as flexible and conductive as exotics - save your money, use this instead
Ian Douglas
2025-05-31 13:54:32
Made connectors for my print head. Used these wires in the loom and so far, no issues, everything is working well. I can now undo two bolts and a few connectors to swap print heads.
momousse
2025-04-29 13:38:30
cable tres flexible
reppdog
2025-04-28 14:15:49
Extremely flexible fine wire, easy to strip and has temp resistance and gauge size on the colors. The colors are bright and perfect for helping me color code during wiring.
Big Dilf
2025-04-17 14:04:42
The wire is of very good quality. Nice and flexible insulation that does not burn easily. The 22 AWG wire worked very well for my 2.54mm Dupont connectors. I had to play with my crimping tool a bit to get the pins to easily slide in. If I had to go back, I would buy 24 AWG wire. Regardless, these worked great. I like the selection of colors. The only qualm I have is that the brown is too similar to the orange (for my eyes & in my lighting conditions). I wish the brown was a bit darker.
Philip J. Balcar
2025-04-02 16:53:58
Let me tell you about the 24 Gauge Silicone Wire Kit - it's been an absolute game-changer for my 3D printer setup!I needed to extend the wires for my printer to mount the main board outside of an enclosure, and this wire kit was the perfect solution. The multi-colored wires made it easy to keep track of everything, and the silicone material is super flexible and durable.Installation was a breeze - I simply cut the wires to the length I needed, stripped the ends, and connected them to my printer. The silicone insulation is heat-resistant, which is a big plus for 3D printing applications.Since using this wire kit, I've noticed a significant improvement in the performance of my printer with the lower temperatures. The wires are sturdy and reliable, and I have peace of mind knowing that my setup is secure and well-connected.Overall, I'd give this wire kit five stars without hesitation. If you're looking for a high-quality solution for extending wires in your 3D printer setup, look no further - this is the kit for you!
kram1961
2025-03-25 10:32:21
Love the flexibility and tinned conductors, but like with most silicone anything, the outside diameter is bigger than standard 18 gauge. Makes it kind of annoying when stripping the wire and/or crimping terminals. All of their wire is like this, but it's good stuff other than that.
Papermaker73
2025-03-06 17:45:27
We used up most of the first batch on a motorcycle wire harness, and it was great! The flexibility of this wire is wonderful and it’s easy to work with. Highly recommended!
Ockham
2025-02-11 17:59:36
This is a nice wire to work with. It has that soft silicone jacket that seems to be the rage these days. The wire itself is very fine stranded, which makes soldering a joy. The silicone jacket is very easy to strip and the colors are unique enough to be easy to spot in a complex hand wired harness. This wire is rated at 600V, which means it is o.k. for use in most vacuum tube amplifiers (not HAM stuff, but audio stuff, where voltages don't often exceed 600VDC.)I do wish the manufacturer offered a 17 color version, or a striped version, as ten colors rapidly runs out.Other than that, a nice bunch of wire. I'll be using it again. 20 gauge is real nice for point to point vacuum tube amp work.Five stars. wish it had more colors. Also, missing gray...which is a mystery to me...but still five stars.
DanF
2025-02-07 17:54:41
Love the fine stranded wire & tinned copper solders easier than anything else I've worked with. Still I mostly use crimp-on connectors and it's still great for those. The only unfulfilled wish I have is that its colors matched standard automotive primary. The red and black are ok, but the other colors, while they can still be recognized as the automotive primary colors, they are really different. That's very minor though - still a 5-star product.
Jason
2025-01-01 15:16:35
Bought this for my Jegs Dash Gauges I made for my 91 S10- worked fantastic. - IG Supreme _ Teg to see final product
Old and Stiff
2024-12-26 15:02:06
18 and 20 and 22 AWG orders.A great set of spools of wire.The quality is very high.The covering is very soft and very high heat resistant, very solderable, and the silicone covering never melts or moves.The copper strands are very soft, and very solderable with a flux. This wire also takes solder well at low temperatures.Lots of colors too. Not bright colors, but all are very distinct.The spools themselves are also high quality and they are shipped as full as you can possibly fill them. First thing I noticed .. is how heavy the package is when you pick it up !Overall .. this
Louis-Georges Dionne
2024-12-23 11:15:32
Using it in miniature electronic projects, the flexibility is great and allows wires to go where needed
Rich Rootes
2024-12-13 13:23:08
Very nice silicone sheathed wire - colours are slightly muted, but not an issueAlready completed one Tonearm, there will be many moreJust as flexible and conductive as exotics - save your money, use this instead
Ian Douglas
2024-12-03 15:35:20
Made connectors for my print head. Used these wires in the loom and so far, no issues, everything is working well. I can now undo two bolts and a few connectors to swap print heads.
momousse
2024-11-14 14:11:26
cable tres flexible
Recommended Products