Your cart is empty.
Your cart is empty.Product Description
- The mode: 15mm Nut-4Pin Pin
- Models:4Pin
- Small Size
- Application Cable Size: 0.2mm² 24AWG
- Material of external mold:PVC
- Rated voltage:500V
- Rated current:2A/Each wire
- Waterproofing grade:IP65
- Fireproofing grade:UL94V-0
- The largest size of nut:15mm
Please note ：Not compatible with other brands of outdoor LED Strip and connectors, only connectors made by the same manufacturer. Make sure that the connector can fit your original connector. Connectors from different manufacturers cannot be used together. Please use BTF-LIGHTING connectors, extension cords, tee connectors, and splitters connector.
Big Size Connector 2PIN 3PIN 4PIN 5PIN
Different PIN Different cable color
Small Size Connector 2PIN 3PIN 4PIN 5PIN
Different PIN Different cable color
Brien Malone
2025-07-09 12:11:57
I don’t know why this y adapter wasn’t an option for the lights I bought. I’m running the lights where the yard is dark and tree-covered. I wanted to put two strings in series, which I could do, but I couldn’t put the two solar panels inline together in the sunny part of the yard. Some new ends and this Y adapter and it works perfectly!
Richard
2025-07-07 11:08:26
I had high hopes for these. But, nope, the plug diameter is just a bit too large, so my (last year's) LED light strings did not mate. Bummer. All of my lights mate together just fine... these Y-cables are the odd man out. The only clue on the packaging is: "The mode: 22mm Nut-2Pin". I don't see any labeling on the lights to indicate whether they are compatible with the Y-cables. Bummer, bummer, bummer, what a waste.I've attached photos: both the diameter is off, and the threading is incompatible.
Jessica
2025-07-01 18:19:38
Split like I needed, works great!
Nicole
2025-04-01 12:59:36
Needed to figure out a way to consolidate on the outlets needed for the 3 Twinkly 100 string lights I purchased. This worked well in doing just that. I was able to plug all 3 of the Twinkly lights into the 1 to 3 splitter and they work flawlessly daily.I also tried this with some inflatables but they shorted once plugged in, so while the specifications don't state what the voltage is, this was allowing too much for a Walmart $15 christmas inflatable.Overall very satisfied with this purchase, would have been great to have had it work with all my decorations, but the lights are a big part of it and it's really been a welcome modification.
james mckissick
2025-03-14 12:41:22
Should have sented back but didn't doesn't work with govee lights.but might somewhere else.
erica
2025-02-25 13:07:56
Fits good if you have same plug. There are different ip for the plugs they are not compatible. Also the T is set up odd. I would of thought the main wire is center with outputs to each side, that is not how this plus is set up. The input is on a long end with outputs coming off at 90 degrees
Jason Pittman
2025-02-20 12:38:01
This worked well to connect 3 separate strand of lights. Has a water proof washer but I haven’t used it long enough to see how well it works. They conned well and tighten up snug. All three strands that I connected are working as they should. Value seemed to be in line with other products. I like these round pin connectors way better than the snap in connectors, no room for error on these connections if you have a brain and can line up the notch.
Jessica Huth
2025-01-22 18:50:57
I bought this since my headlights and fog lights came with two separate controllers and I wanted to get rid of the cord disaster in my engine bay. Unfortunately, these have many sizing issues surrounding them. The pin holes on the female side are far too small to fit any of the 4 pin connectors that I tried to use, I have multiple different brands and all of them work together. My other issue I've had is that the screw part is too thick to actually fit over the threads on any of my cords. These seem like quality cords, and it works great one way but obviously I need both ends to fit for it to work haha.
Recommended Products