Your cart is empty.
Your cart is empty.
Fitment:
2014-2018 Fit for Silverado 1500 with 5.3L/6.2L V8 Engine
2014-2018 Fit for GMC Sierra 1500 with 5.3L/6.2L V8 Engine
2015-2020 Fit for Cadillac Escalade with 6.2L V8 Engine
2015-2020 Fit for Cadillac Escalade ESV with 6.2L V8 Engine
2015-2020 Fit for Suburban with 5.3L V8 Engine
2015-2020 Fit for Tahoe with 5.3L V8 Engine
2015-2020 Fit for GMC Yukon/Yukon XL with 5.3L V8 Engine
2015-2020 Fit for GMC Yukon Denali/Denali XL with 6.2L V8 Engine
2019 Fit for Silverado 1500 Limited with 5.3L/6.2L V8 Engine
2019 Fit for GMC Sierra 1500 Limited with 5.3L/6.2L V8 Engine
(Fits Automatic and Manual Transmission),Will not fit Hybrid
Package Includes:
1 x Air Intake Kit
And all necessary part will be included like in the
Jennifer Alderman
2025-09-03 12:25:44
Very easy install once I found a video on YouTube, as there were no instructions included. 🤔Truck sounds great, runs great and a little added HP never hurts!
joey
2025-08-15 15:32:51
Installed on my 2015 Denali crewcab, easy installation i set it up outside first in two pieces and the cone left for the end for easier installation. Dont come with instructions but go based of off the picture here on Amazon it helps you can double your rings at the base of the pipe where it meets the vortex intake, whatever you like but its worth it your not just buying a brand name you're buying a good quality and light weight part by the way I got the black one thinking it was plastic or pvc or sometime type of plastic turns out its a light weight aluminum pipe clean any excess scraps of the mass flow sensor so you don't have any issues with the computer in the dash board at first it won't read the codes but if you have to reset the truck do so so your truck can read that it just had a new part installed.
Ray Sadesky
2025-08-09 11:07:10
Overall, this is a good value IF you can deal with less than ideal fit. The parts themselves appear good quality, nice powder coating, metal tube was nicely formed and polished, the air cleaner seemed like good quality - as good as my K&N, and threaded ports are without burrs. There were no instructions but the pictures on Amazon are all you need.All the stated parts were included. The actual fit isnt that great - there is a slight mismatch in angle between the metal tube and the air cleaner box. As such, the rubber boot wants to pull off. I torqued down the hose clamp as tight as humanly possible, and seems to work ok. The 2 piece box needs to be assembled before putting it into the truck and it takes some effort to get it in place. And best to remove the 3 bolts on the plate the new box bolts to.My stock air cleaner box was held in place with rubber bungs and takes a pretty good tug to get it out. You also need to unbolt the little brace that runs directly over the stock box.I removed the forward bolt and rotated it back out of the way. The two replacement breather hoses aren't formed and the passenger side, due to the twist it needs to make, wants to pull off. After being warmed up a few times, it may take a set. However, I'd recommend buying 4 hose clamps to secure these.I installed this on a 2017 Silverado with a 5.3. The Amazon listing says it also fits a 6.2 - and the kit comes with the appropriate reducer rubber boot. But from a performance standpoint, I wouldn't think reducing any diameter on the intake would help, cause the tube is the diameter of the 5.3 throttle body. I really didn't notice any improvement in performance, but it does look good.Still, overall, I think this is still a good value for the money.
iverson2k10
2025-08-02 10:06:37
This is a great affordable cold air intake, I have to say, I would recommend the seller to have instructions for those who are not good with their hands but it’s a pretty easy install regardless. Also, once it was installed you can literally feel the truck growl of the cold air intake!
smr420man
2025-07-27 14:56:30
The media could not be loaded.
J. Winiewicz
2025-07-19 19:17:33
As stated in other reviews, zero instructions but it was easy to figure out. Yes you will need to supply 4 - 1 inch hose clamps for the breather tubes. The quality is good. Here is my issue; the truck was difficult to start after installation and kept stalling. Then once it smoothed out, the check engine light came on. I dove it to the gas station and back around the block (about six miles) and it ran awful. Very hesitant and poor throttle response. When I finally got it to even out a bit, I didn't notice a difference in how the truck runs or sounds. I have used K&N products in the past and noticed a huge difference in how those trucks ran and they had a great sound to them. I'm not stating that this product is inferior to K&N. I'm thinking that the 2014 5.3ltr GMC does not respond well to intake modifications. Going back to stock intake and will try and sell this locally.
Meci Jones
2025-07-18 11:40:42
I install my cold air intake and I'm happy with the result took my gmc sierra on a test drive and it ride good and pick up speed quick with this intake good price good product
Mark
2025-07-08 13:34:27
No instructions. Missing parts
Esteban
2025-04-28 13:02:17
Es muy intuitivo de instalar, lo recomiendo ampliamente, tengo varios meses usándolo y sin ningún problema, las mangueras que van pegadas al cuerpo de aceleración no venÃan incluidas pero con ir al autozone y pedir manguera todo propósito y sus abrazaderas completas el kit, es muy buen material por el precio no le pide nada a uno de marca k&n etc. Suena muy bien y siento más rendimiento del motor
Isaiah
2025-04-27 11:40:41
Works great. Been getting better gas mileage and sound. Install took about 40 mins no instructions but was easy to put together.
Oilsandsoilfan
2025-03-19 10:49:59
Looks great, fits well, sounds amazing and saves me approx 2L of fuel per 100km of highway travel. My fuel useage went from 13.8 per 100k down to 11.4 per 100k, this will pay for itself in no time.
alexander
2025-03-03 12:15:24
Me pareció buen material, fácil instalación
Anthony Appelman
2025-02-15 18:44:30
Added hp and performance.Uses less gas now.
Recommended Products