Your cart is empty.
Your cart is empty.Product Description
0
From the Manufacturer
Stem unit for two handle and basin faucets (except slow close).
ljm
2025-08-25 15:34:15
This is an OEM part with easy to follow installation instructions and I did not have to drive to Home Depot which is a lot more expensive for the identical item.
Duane51
2025-08-23 13:53:19
Good fit.
SOMO
2025-08-14 12:39:05
Bought these brand name Delta cartridges to fix leaking handles. When the water was turned on water would slowly leak out from the base of the handles. Once the new cartridges were replace the leaking stopped. Helpful hint, you may also need Delta RP4993 springs and gaskets/seats. One of the handles stopped leaking but would not shut the water off completely and there was a drip. After a little research I realized a new spring and rubber gasket/seat might fix it and it did, no more drip. Another helpful hint, if you need to replace the spring and seat/gasket the wide part of the spring goes at the bottom and the narrow part goes in the rubber gasket. The spring goes in first with rubber gasket/seat placed over the top.
Ron Schroeder
2025-07-21 18:20:14
It fixed the leaky fawcett. Was very easy to install.
Gerry Walsh
2025-07-12 10:37:28
Exactly what I needed. Only gave this item a 4 star rating because they used to come with a new seat and spring also. Other than that, no drips...no runs...no problems.
nom de plume
2025-07-05 20:44:43
Had purchased a Danco replacement stem from the local big-box hardware store and it didn't work. The clerk at the big-box store was kind enough to explain that Danco didn't always manufacture to exact specs for the stems, cartridges, etc. and that we might have to purchase the OEM part which they carried (BTW which was twice as expensive as here on Amazon!). We decided to order online and Amazon had the best price, with SS shipping which meant that we could get it quickly since the water was turned off until repair!!! Ordered this stem which is made to Delta's specs since it is manufactured for Delta. Works perfectly.
Careful Shopper
2025-04-19 17:10:55
This was perfect, fixed the leak, handles were dripping water, 25 years old, worn out part, replaced easily, took all of 5 minutes or less, worked like a charm. Thanks.
E. Tate
2025-02-15 16:52:09
I bought two; they arrived in an unmarked bag. I believe they really are Delta parts, though; they are identical to the Delta-branded parts I've bought in the past. (I have had more success with actual Delta replacement parts than the third-party replacement parts that are supposed to be equivalent.) These stems fit perfectly, and work fine. I will order a couple extra to have as spares, so the next time I have a leaky faucet I can fix it right away instead of dawdling. (It doesn't get any easier if you let it leak long enough to get mineral deposit buildup...)
Christian
2025-02-02 12:24:12
I had bought two generics replacements at my local store for under 5$ each. The one on the hot water would not completely close if the water was left one for more than 30 seconds (like when shaving). As for the cold water, nothing was leaking, but the handle was hard to close and sometime the kids could not close it.So I bought these one and everything is perfect. Quality matters and ask yourself if the saving will be worth it!
Andrew
2025-01-31 14:04:44
Easy to install using common hand tools. No issues or complaints. This stopped an old faucet from leaking.
Dave Weatherill
2025-01-22 17:45:56
Fit great, should be ordered with the spring and rubber cup.
Loid
2025-01-19 14:19:18
I bought this in an attempt to fix my bathroom faucet. A couple weeks prior, I replaced my cartridge with the Moen M3816 which is the equivalent. It was SO hard to turn the faucets on and off; there was so much resistance it felt like it would snap. The hot side was much worse than cold likely due to thermal expansion. So I bought these Delta units to fix the problem. The action is SO much smoother, but it was leaking pretty badly right out of the package! Totally unusable.The only way I was able to get a decently working solution was to FRANKENSTEIN the bottom section from the Moen kit with the top section of the Delta kit together. Then I had smooth action with no leaks. What a gongshow. I wish I could buy a brass cartridge, but they only seem to make this crappy plastic pieces.The best replacement unit I've had in the past was part D-1 from Master Plumber, but my store that sold them closed down.
Recommended Products
