Your cart is empty.
Your cart is empty.Product Description
nubbles
2025-06-26 17:42:34
Good deal. Wanted an NMO mount for my pctel 800mhz scanner antenna and I didn't want all the typical lossy connectors and adapters between the ant and my scanner. This is the item. I'm slightly concerned about how brittle the cable conducter to nmo connection looks but maybe just being paranoid. Will update if I encounter any issues
OKGEARHEAD
2025-06-22 17:09:41
We use this in our RV's. Plumbed inside from 30lb tank and another hooked directly to regulator on 500 gal tank. Great emergency heat if power goes down also. Don't waste your money on the heat actuated/wood stove fan because it moves almost zero air and costs about 1/4 the big buddy price.
Brian Diver
2025-06-02 10:12:27
The guy I got my Powered Parachute from cut the antenna wire very short and it never picked up quite right so I ordered this and relocated the antenna. I just had the machine on the ground and it worked flawlessly. I'll find out more when I go flying next time but just from the initial install it worked great!
Brian
2025-05-06 17:09:28
I've bought a total of 5 of these NMO to BNC cables over the years for different vehicles, and I'm about to buy 4 more for another project. They simply just work great. With proper installation, I haven't had any coming loose or getting rusty, despite constant exposure to the elements and car washes.
CJ C works in I.T.
2025-03-27 16:47:57
I did not catch, somehow, that this, the only cable + NMO adapter on Amazon that's longer than too-short 13 feet, comes only with MINI UHF or BNC. If I had realized this, I would have chosen the BNC, because I already have adapters for that to PL-259 and I already have handhelds that can use BNC. However, as I have both BNC and PL-259 connectors in stock, it's not worth doing without the cable, now, Thursday night, when during the weekend is the only time when I'd be able to work on installing it.That said, I've not had a chance to test it or use it yet, but looking at it, it seems like it's manufactured well enough. At least the NMO connection is soldered. I feel like maybe I might have done it a little more thoroughly, but I'm confident this will work fine. And, for such a short run, the 3 dB of loss per 100ft of cable should equate to just about a half a decibel, which shouldn't even be noticable on anything inexpensive enough to risk leaving in the truck.
David
2025-01-19 16:18:53
Metal used strip when trying to hand tighten, gasket shreds. Do not waste your money on this one.
claude n.
2025-01-16 16:34:12
Worked perfectly....
Zach
2025-01-14 17:21:05
Everything works as it should. I see no quality issues as others have stated. I would recommend this product.
Recommended Products