Your cart is empty.
Your cart is empty.Product Description
FishTrip Rod Repair Kit:
Material: Ceramic
Size: 4#~40# (12 sizes)
Package includes: 60pcs ceramic ring
Advantage:
A high-quality rod eyelet repair kit reduces wear and tear on your fishing line and improves the accuracy of your fishing throws.
Repair your rod without removing the guide ring. A simple replacement can save you from having to go to the fishing shop to repair your broken rod, greatly reducing your fishing costs. 60pcs set is enough for you to repair multiple fishing rods.
Notice:
Since the ceramic material is easily damaged and the volume is small, if the product you received is damaged or missing, please feel free to contact our after-sales service, and we will arrange a replacement for you immediately.
how to repair
Step 1:
First measure the inner diameter of the stainless steel frame of fishing rod guide.
Step 2:
Measure and select a suitable outer diameter of the ceramic ring.
Step 3:
Install the ceramic ring into the frame of the guide ring. Tips: You can heat the metal guide ring (not too much) to expand the metal.
Step 4:
Apply super glue on both sides of the outside of the ceramic ring for installation. Superglue and shrunk frame create a strong fishing guide.
Joel
2025-07-03 10:31:39
Easy to install. Eyelet ring was to small so I heated metal with a torch until red and it slipped in without a problem. I gorilla glued it together.
Gil
2025-06-15 17:45:18
The kit included a good variety of ceramic inserts for fishing rod eyelets. I was able to fix mine by measuring the eyelet diameter and matching an insert's outer diameter. Since it was an exact fit, it was tricky to press it in without breaking the ceramic ring. I was able to do it by heating the eyelet so it can expand and the ring fit in perfectly. I finished by adding a bit of epoxy glue around the contact areas. Overall it afforded me an easy and inexpensive fix. The insert appears to be good quality and it matched the previous one. So far, no issues.
Frank
2025-05-12 16:27:30
To difficult to install. Broke a few while trying to install. Went complete assembly.
Collin
2025-04-07 14:44:06
I had two guides on my baitcaster pole that had chipped ceramic inserts. I was able to buy this kit instead of replacing the entire pole or the whole guides themselves. The trick is to clean the metal guides well and use heat to expand the ring on the metal guides. I used a small torch to expand the ring then placed the insert with small pliers. Be careful, the ring will be hot. Once it cooled, the ring felt solid inside. I then used the liquid super glue around the edge of the insert and metal ring. Hope it holds!
Carl
2025-03-30 14:09:24
pieces worked perfectly just replaced the broken ones.
R C
2025-03-23 13:50:02
There must be 100 pieces in the kit and believe it or not I couldn’t find one eyelet that fit my Diawa Rod ! I ultimately made some adjustments and made one fit!
James R
2025-01-25 16:00:35
the 30mm eye on my spinning rod had a chipped insert. i took it out and popped one of these and the rod it back in service.
Eddie Hutchens
2025-01-12 10:00:10
Nice item, but was delivered 2 days later than originally stated.
Recommended Products