Your cart is empty.
Your cart is empty. Application:
The adjustable diameter range is 5.2''-7.6'',
but please carefully check your car locking ring diameter before order, if not in 5.2''-7.6'' diameter range that is not fit your car.
David Osborne
2025-08-18 11:34:59
I was at the end of my rope trying to get the fuel pump out of my Cadillac STS when I saw this tool. I had tried other tools, rent a tool, my own ideas(not good), this tool(with considerable elbow torque), brought it right out. I thought my ratchet or extension had broken it came out so quickly. It's heavy duty built and I hope I never have to use it again but if I do I won't hesitate to use this tool again.
ErnestAZ
2025-08-02 11:25:43
Worked great for metal ring. Being able to use a socket driver instead of banging with a hammer was great. Less damage and chance of tank puncture
amazon1
2025-07-04 12:47:27
I tried using this on a 2002 Camaro. I ended up using a brass drift to get it to release. The tool seems well made and would likely work on older style lock rings that turn more easily.
K.bam321
2025-07-02 16:22:28
I like that it’s adjustable. It’s strong and sturdy. Can’t beat it for the price point.
Scott Petersen
2025-06-01 18:47:08
The quality seemed ok, as I put a bunch of force on it, and it didn't break. The tool does not work well for the 5 tab ring on my 2011 Sonata, as the arm slots do not line up, they work for an even number of tabs, or are for 6 tabs? maybe, also the car body gets in the way of getting the tool in a perfect position.In the end it damaged the lock ring, but was slightly helpful when it was mostly removed with a vice grip, hammer and screw driver. The lock ring was pretty rusty, and difficult to remove
datonz
2025-05-22 15:40:03
The arms never stay put, and the bolts that hold them broke the 2nd time I used it.
Darren
2025-05-21 12:08:50
I tried to make it fit and ended up breaking the screw off in one of the legs. Got it screwed back on with two of the three legs. Not a proper fit for a 2007 Chevy express van
Lyle Y.
2025-05-08 18:06:38
This tool made removing and replacing the fuel lock ring a breeze. The ring part anyway.The last couple time I did the job without this tool was an ugly hassle with a lot of cuss words, we beat that ring silly. This time (whole different vehicle) popped off the ring easy. To reinstall I had to change the slots and tighten it down where I wanted then it was as easy. 02 Buick lesabre just fyi.
Jay Mark Derick Casimiro
2025-04-28 16:53:32
Good
lostinspace
2025-04-26 11:17:02
Great tool for the job much needed
Roy
2025-03-08 18:24:32
The 1/2" drive slot is a little loose but was still to turn the ring which hadn t been off ever
BD
2025-02-16 12:02:57
Takes quite a bit of torque. Like that it's adjustable. Glad I had this to remove the rusted fuel ring. Lots of PB blaster. Used a screwdriver to carefully break the rust between locks and ring. Worked just as well to torque the ring back on.
Conklin
2025-01-16 13:32:09
A must have to do fuel pump in gas tank
Recommended Products
