Your cart is empty.
Your cart is empty."H" 15/16-1-1/16" High Speed Steel Adjustable Blade Reamer ~ Straight flute reamers should be used in thru-hole applications only. ~ Blades are adjusted by loosening one nut and tightening the other. ~ Each reamer expands to the next size. ~ Adjustable blades give the operator the ability to handle multiple hole sizes with a single tool, making them a good choice for users with low volume reaming needs. ~ Square end allows the user to turn the reamer by hand with an adjustable wrench or straight handle tap wrench. ~ Overall length is 9". ~ 6 blades. ~ Length of cut is 2.95".
john d land
2025-08-24 14:23:53
Works very well
Paul
2025-08-16 09:24:23
I had a need to enlarge wheel hub stud holes to .600", but the closest drill size I could find was 19/32". I preset the reamer to the .600" using a micrometer, turned the reamer slowly by hand with light pressure and used lots of cutting oil. It did the job, and if I never use it again, it was worth the cost.
Linus and Luna of Santa Cruz, CA
2025-08-12 12:52:10
This is an adjustable reamer that works well. It has a nice lead on the end of the cutter to help align the reamer and get the cut started. The adjustment mechanism is solid and works smoothly. The machining is not as nice as some of my older USA made tools but for the task at hand it was the correct tool and the right price.
Bob Hansen
2025-08-04 15:21:09
I know better than to buy precision tools on Amazon but I get lucky every once in awhile......This was a total miss though. It looks like someone ground this on a bench grinder and none of the cutters are even close to straight. Now I have to spend 30 minutes of my time to drive into town to return this instead of Amazon making it right and sending someone to pick it up, or HHIP no requiring it to be returned. This will be the last import cutting tool that I will buy, while it was quick to get the tool delivered now I am not getting my job completed on time and have to waste time to return the tool........I cant even begin to tell you how frustrating this is.......I will spend the money and stick to McMaster Carr or my local Tool supplier
eddie zackery
2025-07-29 11:48:51
I like the product very well. It was well built at a reasonable price.
Man
2025-06-04 18:53:53
Perfect, I was able to ream out a 304 stainless steel tube with this, in order to fit acme lead screw inside. I will probably never use this tool again so for a one-time use, it was perfect. Can't say much beyond that.
Andrew
2025-04-29 21:47:59
Did a great job of reaming camshaft bushings on an early Triumph motorcycle. These are well made and the blades are sharp with a nice lead in to hold it straight. In case your interested they're Made in China.
YT
2025-04-27 16:07:05
It works as it should I was able to enlarge 2 bike frames’ aluminum seat tube from 27.0 to 27.2. But the user must know how to use these readers carefully. But similar to what another reviewer said, there are probably a lot more expensive but better made reamers out there. But for what I needed it to do, I took my time and it worked well.
Client d'
2025-04-21 16:45:55
Outil de base qualité très dessus bon pour la poubelle
Tom C.
2025-03-07 17:40:05
The reamer works very well. Must use some cutting oil to keep the cutter cool while cutting. The blade do move a bit so a little at a time so you do not end up with a hole larger than you want. Overall a good product.
ALO
2025-02-14 16:08:37
I've only used one so far but it cuts fine in aluminum. Used to make a hole bigger to fit a bushing.
Richard
2024-12-19 11:40:34
Great reamer, simple to use, can be as delicate as you need to be depending on the material. What a hard slog cutting steel, however I am sure cast or brass would be a lot easier.
kyle pennington
2024-11-13 10:10:22
Did what needed to do
Recommended Products
$35.59
$ 18 .99 $18.99
$13.69
$ 6 .99 $6.99