Your cart is empty.
Your cart is empty.Product Description
Meaureman has 20 years rich experience in the measuring of pressure, temperature, flow, level industries, The "Measureman" branded products are the combination of continuous good quality and affordable cost. "Measureman" products are selected and designed by professional engineers.
Gas Pressure Test Gauge Assembly
- This pressure gauge is designed for gas pressure measuring in the gas line etc
- 2" dial size, zinc plated steel gas test body, 3/4” NPT female thread adapter attaches directly to gas line
- Black steel case, brass wetted parts, dry
0-100psi/kpa, double scale,
1/4" NPT male solid brass connection
Black steel case, brass wetted parts,
zinc plated steel gas test body
1/8” NPT air bleeding valve
3/4” NPT female thread adapter
ANdrew P. Sroczynski
2025-08-22 18:04:37
Good quality
Customer
2025-08-12 12:25:38
Looks nice and well built. Im using it to make a leak down tester for a 2 stroke.Doesnt need to hold more than 5-6psi.
Arnold Micarelli
2025-08-09 12:28:50
Use plennty of pipe dope or tape. The threads are a bit loose for NPT
McPhee
2025-07-28 15:36:04
I bought this pressure gauge to pressure test a new gas line to my garage. It worked perfectly and did not lose any pressure during the 3 hours of testing.
JL
2025-07-25 18:48:22
Es un buen producto, se ajusta a la descripción de la publicación de la pagina web. Rapido servicio, llegó sin contratiempos.
Shaganasty
2025-07-19 18:54:09
Out of the box, leaked at air connection, removed the air supply fitting, used yellow pipe dope, connected back to gas line and pumped up, still a leak, removed it again, used yellow Teflon on fitting, back on gas line, pumped back up….no leak on that fitting BUT have leak on 3/4†fitting now, removed, used gas yellow Teflon on it, still a leak. Went and bought another 3/4†nipple, wrapped in Teflon again, tested and leaking, see attached photo.Pretty much JUNK.(Note: retired GC, so, I’ve done this many times, used an older gauge instead of this new one, worked fine.)
Gee Boots
2025-07-16 11:49:54
Purchased together with a SharkBite 1/2 Inch MNPT Adapter and an NPT 1/2 female to NPT 3/4 male thread brass reducer; to pressure test a 1/2 PEX shower valve installation. No problems with the gauge; it did help me to locate a leaky fitting, so it was definitely worth the money spent. The accuracy of the gauge seems ok, in that it matched the tire inflator gauge I used to within a few PSI - definitely good enough, which makes it suitable for purpose.
Jessie Stienstra
2025-06-30 12:58:19
I was holding the psi gauge in my hand when I was closing a door and the vibration from closing the door with the device in my hand caused the back plate with the pressure readings to severely deform. It bent inwards causing the back plate to inhibit the needle from moving past 12 psi. I believe it still operated for my purposes but I now question the reliability/accuracy of the gauge.
MSDG
2025-04-04 14:12:06
Recommend
Tyler Handy
2025-04-03 13:50:06
Worked great and will keep for future use. Threaded nicely and even came with some teflon tape. A great product I can use multiple times
michael martel
2025-03-17 16:26:22
Really badly assemble the purge valve is leaking and is stuck There i can't fix IT at all
Mik
2025-02-19 13:53:17
Simple and easy to use.Add to your NG iron pipe with gas tape, add compressed air (1.5x what pipe carries) air from bike hand pump or compressor to confirm PSI. Let it be for 30min or overnight to confirm seal is good.
MJM
2025-01-31 12:04:01
Ive used this and it does leak as others have mentioned. You can remove the gauge and apply some tape and it will fix the issue. What ive done on top of that is hooked it up to a valve shut off. For the price it’s okay. I wouldnt recommend it to someone that isnt handy
Recommended Products
$79.00
$ 30 .99 $30.99