Your cart is empty.
Your cart is empty.Product Description
Carbon Fiber Rod
Premium carbon fiber rods are made from 100% high-strength carbon fiber reinforcement and epoxy resin, giving them a smooth, shiny, and beautiful carbon fiber surface.
- Lightweight: Carbon fiber is significantly lighter than steel and almost twice as light as aluminum when comparing similar sized pieces. This makes carbon fiber rod an excellent choice when weight reduction is desired without compromising strength.
- High Strength & Stiffness: Carbon fiber reinforced polymer (CFRP) exhibits the highest specific strength and modulus (stiffness) per density compared to metals, plastics, and wood. This exceptional strength and stiffness make carbon fiber rod suitable for applications that require structural integrity and load-bearing capabilities.
- Low Thermal Expansion: Unlike metals that expand and weaken when exposed to heat, carbon fiber has low thermal expansion. This property reduces the risk of issues or failure due to thermal expansion, making it a reliable choice in high-temperature applications.
- Low Thermal Conductivity: Metals, especially aluminum, are known for their high thermal conductivity, which can lead to heat transmission or heat soak. In contrast, carbon fiber has low thermal conductivity, minimizing heat transfer and providing insulation properties.
- RF Shielding: Carbon fiber has the ability to attenuate or block radio frequency waves, making it effective for shielding against unwanted radio transmissions. This property helps protect devices from scanners or potential data breaches, ensuring data security.
Various sizes---Rich categories, different diameters and lengths to choose from
- Diameter:0.5mm,1mm,1.5mm,2mm,2.5mm,3mm,3.5mm,4mm,4.5mm,5mm,5.5mm,6mm,7mm,8mm,9mm,9.5mm,10mm,12mm
- Length:100mm,150mm,200mm,300mm,400mm,420mm,450mm,500mm
High Strength
Carbon Fiber Rod offers excellent strength, allowing it to withstand heavy loads and provide structural stability.
Stable Performance
It demonstrates consistent and reliable performance under varying conditions, providing structural integrity over time.
Widely Use
Carbon Fiber Rod are suitable for aviation model aircraft, model cars, multi-rotor support rods, model boats, racing cars, robots, DIY aircraft production, 3D printers, arrow rods, kites, windmills, sails, DIY subject support poles, mosquito nets, Tents, bows, hatches, PCB equipment shafts, luggage, hand rods.
JR
2025-08-26 14:24:21
Used for 223/556 alignment rods. Works great for that. nice and straight
Mark S
2025-07-26 15:37:12
These are very nice carbon fiber rods. I would buy again. These are solid rods. Be careful when ordering, these are not hollow tubes.
Twitch
2025-07-24 13:34:35
2 of 3 were true. Good enough for me. I used them as 5.56 suppressor alignment rods and they did the job.
Stacey B
2025-06-30 13:41:55
These were bought to use in my classroom for a project with gears. We needed to make sure that the rods would not bend in the gear mechanism. These were absolutely perfect. They are strong and durable, and we’re packaged extremely well.
DaddyMoreBucks
2025-05-28 14:10:41
The precision carbon fiber alignment rods for a 5.56 sold elsewhere are 5.5245mm by 17 inches according to the manufacturer and cost at least $50 each. These are made in China and are measured at 5.489 to 5.510 on my calipers and 450 mm or 17.75 inches long. They are very straight with no wobble when rolled on my slate top pool table. So these are less than 0.03 mm smaller than the precision product and you get three of them for only $17. They fit snugly in a 5.56 and work very nicely for a fraction of the cost. As you can see in the picture my YHM Turbo is properly aligned.
Dan Amrich
2025-04-01 09:17:14
This is a very specific application of a short carbon fiber rod, but it's the perfect answer for using my headless electric guitar with traditional guitar hangers throughout my home. Slide the rod between the nut and the string retainers, and you'll find the rod is more than wide enough to cover the gap and plenty strong to hold a guitar (the Ibanez Q52 here is only about 6 lbs). I've been using this for about a month now with zero ill effects and no mishaps.
Certe ðŸ§
2025-03-27 12:13:28
Used as pushrods on a micro plane, works well and light weight.
Donnie
2025-02-27 16:08:55
Strong compression for only 1mm. True to size.
Customer
2025-02-15 12:26:32
Awesome!!!
Recommended Products