Your cart is empty.
Your cart is empty.Product Description
MOOSUN Performance Cold Air Intake Kit
Applicable vehicle
Fit for 2002-2006 Cadillac Escalade with 5.3L/6.0L V8 Engine
Fit for 2002-2006 Avalanche 1500 with 5.3L V8 Engine
Fit for 2000-2006 Suburban 1500/2500 with 5.3L/6.0L V8 Engine
Fit for 2000-2006 Tahoe with 4.8L/5.3L V8 Engine
Fit for 1999-2006 Silverado 1500 / 1500 HD with 4.8L/5.3L/6.0L Engine
Fit for 1999-2006 Silverado 2500 / 2500 HD with 5.3L/6.0L V8 Engine
Fit for 2001-2006 Silverado 3500 with 6.0L V8 Engine Fit for 2003-2006 Silverado SS with 6.0L V8 Engine Fit for 1999-2006 GMC Sierra 1500 / 1500 HD with 4.8L/5.3L/6.0L V8 Engine Fit for 1999-2006 GMC Sierra 2500 / 2500 HD with 5.3L/6.0L V8 Engine
Fit for 2002-2006 GMC Sierra Denali with 6.0L V8 Engine
Fit for 2001-2006 GMC Yukon Denali with 6.0L V8 Engine
Fit for 2001-2006 GMC Yukon Denali XL with 6.0L V8 Engine
Fit for 2002-2006 GMC Yukon Denali XL 1500 with 5.3L V8 Engine
Fit for 2002-2006 GMC Yukon Denali XL 2500 with 6.0L V8 Engine
Please MATCH your vehicle on the left top before purchasing
Package Content
- High Flow Air Filter
- Smooth Intake Pipe
- Silicone Coupler
- Hose Clamp
- The cold air intake kit comes complete with everything necessary for installation
Dry Air Filter
Each intake kit comes with a huge, highly-efficient air filter which results in better performance and better protection for your engine.
Most new design are now dry filter instead of oil filter. Our filter do not require oil, it is reusable and washable. You can wash it with soap and water, rinse it until it is all dry up and use it again. We recommend you to check every 5,000 miles to see if it needs to be wash / clean.
Premium Silicone Components
Silicone is a premium rubber which seals better and lasts longer. The air filter, couplers and tube seals in our intake kits are made from our premium silicone rubber. This means they won't crack, has exceptional tear strength, and can handle temperatures as high as 400F. Also, with a high friction surface and no oily residue, our silicone filters and couplers won’t slide off the tube.
Easy to Install with Basic Hand Tools
MOOSUN air intakes are very easy to install on your car or truck. A typical air intake installation can be done with a screwdriver, pliers and a ratchet-set in 90 minutes or less!
MOOSUN specifically engineers their intake kits to use existing factory holes and mounting points, making installation simple. The vast majority of MOOSUN cold air induction systems do not require any cutting or drilling.
Our air intake
- Cold air allows to burn fuel more efficiently, comparing to hot air.
Protect Your Engine
- Multiple filtering protection engine
- Increase power high efficiency air intake
- Smooth flow enhance response
- Not afraid of moisture effectively prevent the breakdown of the air filter
Your Engine will GROWL
- A satisfying growl upon acceleration, yet quiet once at speed. Removes stock baffles and soundproofing components from the engine bay.
How to install a MOOSUN High Flow Intake Kit
Step 1 - Make sure your engine is cool to the touch.
Step 2 - Disconnect your battery cable from the negative terminal.
Step 3 - Remove your old air intake.
Step 4 - Attach the silicone coupling that came with the air intake kit to the throttle body.
Step 5 - Secure the coupling by tightening a hose clamp at the end.
Step 6 - Place another hose clamp on the front of the coupling, but don’t tighten it just yet.
Step 7 - Slide the intake tube into the silicone coupling, and ensure that your intake pipe is running from the throttle bay away from the engine bay.
Step 8 - Tighten the silicone coupling and secure all brackets on the tube.
Step 9 - Plug the mass air flow sensor into the new cold air intake system.
Step 10 - Reconnect the battery.Enjoy the new power boosts immediately!
Joshua L
2025-07-25 15:08:16
Gave me 2004 Tahoe z71 5.3 better acceleration.. nothing crazy but noticeable. Also a more throaty sounds when hard accelerating.I thought this stuff was made outta plastic.. nope.. metal which was surprising. Very good quality and "ease" of install. Why did I put "ease" because the instructions were of poor image quality and direction.. but if you have half a brain you know how it's supposed to go.. which was easy. Only suggestion is clearer image quality for the instructions. It's like a 240p black and white grainy image. Other than that I'd take this any day over a k&n version for the Tahoe. Almost the same thing but $300 cheaper. "Oh but if it breaks" it's mostly metal and I can replace it 5 times for the price of 1 k&n... lol
Emmy
2025-07-07 10:27:03
Pretty simple install, took about 45 minutes and that was me being very meticulous about the placement. Like everyone said the bracket that attaches to the air filter box is way off, but once everything is mounted up it’s snug and won’t move at all. I’m really happy with CAI so far. Only thing I did different was keep the bottom plate in below the air filter. I live in south Florida so I don’t want sand or water getting into my intake. The stock filter also would not fit. I couldn’t even get it into the air filter area. Lucky for me though I had already ordered a k&n 4†filter so everything is all good. Looks really trick underneath my hood and I can definitely feel better throttle response and a bit more get up and go. Buy this you won’t be disappointed.
Tani
2025-07-05 16:48:14
Easy to install. fitment was a little off but still looks great. Quality is good.
Riley Montano
2025-06-29 15:57:08
Has been on my truck for a good amount of time now and has worked great and adds a deeper tone to the truck but I would highly recommend getting a better filter because the one it comes with gets dirty very quick and never wants to stay on
mike
2025-06-28 15:11:26
I didn't want to spend allot of money on a cold air intake so I chose this brand and I am glad I did! Fit was good in my 2006 Silverado 5.3 and has a nice sound when you open her up! Install was simple took about 30 minutes with just a few tools.
Benjamin Sutherland
2025-06-26 16:36:31
OK it looks great, so it does work and all the parts to put it together are in the kit even though it took me a few minutes to figure that out and that being said it fits very poorly I actually made a connector for the filter because it fits very loose after that it is now secure the directions don't tell you every step I had luck looking at photos and watching a video
Nicholas benavidez
2025-06-17 13:20:18
This intake is great for my applicationMade out of high quality materials and filter is excellent, I also like that it comes with a plate/shroud to keep hot air away don’t hesitate and get one for your whip asap
DI Taylor
2025-06-05 10:17:28
So the pictures are 1: everything laid out and accounted for, 2: before picture of the old stock air intake, and 3: post installation of the new cold air intake from MooSun.So talk about a smooth installation. The hardest trouble I had was unplugging the stubborn stock electrical air sensor from the stock air intake. However, a YouTube video solved that. I love YouTube. Anyway. I am not skilled at automotive modifications, not at all. But with the included step-by-step guide, this was like building with Legos. Some of the parts I didn't understand the name to but using common sense and "Hey look! it fits!" made this an easy upgrade. HIGHLY RECOMMEND. Don''t spend $100 plus bucks on a filter from a name brand company. MooSun has got you covered on the cold air intake front. This is one upgrade that you can cheap out on and still get a great product.So after the upgrade, which took me about 2 hours, I took my Tahoe out for a spin and it's now got a really cool "sucking" sound when I rev the engine. I think it performs better too, but I don't have a Dyno HP measuring scale. Bottomline, this product is easy to install, the parts are well made and quality, and everything was included. Well actually, I had to use 3 of the 5 old air intake screws (as instructed in the instructions) and one of the old hose clamps. I might have used a hose clamp where it wasn't necessary, but hey, my Tahoe runs great, and that's what matters.Thank you very much for giving me a great product for a VERY good price MooSun. I WILL look for your products on future upgrades.
Zach
2025-04-20 11:51:21
Not gonna be as nice as an expensive name brand intake but for this price it’s well worth it. Little bit of messing around to get it in but only took 30 mins, sounds good, looks good.-2001 Silverado 5.3
Diego
2025-03-19 12:31:09
Da un muy buen funcionamienro, lo califico con 4 estrellas debido a que el soporte para evitar que vibre no quedo en mi motor, se le tuvo que adaptar uno
Badr
2025-03-17 20:55:23
This kit is high quality made, I'm happy with the sound, and I've noticed a less fuel consumption.
Kevin
2025-01-11 17:05:36
Pretty happy with this intake, it fits perfectly and other than the cheaper 'silicone" connectors it's perfect. Highly recommended for a less expensive intake
NastyZ28
2024-12-21 21:26:45
used on many ls swaps
Recommended Products
$59.79
$ 27 .99 $27.99