Your cart is empty.
Your cart is empty.The OEMTOOLS 24539 U Joint Puller is your ultimate solution for effortless U-joint removal. Designed for class 1-3 passenger vehicles and light-duty trucks, this tool fits bearing cups with an outside diameter of 1" to 1.25". Its versatility makes it perfect for a wide range of vehicles, including SUVs and light trucks. This universal joint removal tool is engineered to work seamlessly with a 1/2" drive impact wrench or smaller, ensuring efficient and straightforward operation. This compatibility allows you to use commonly available tools, making the removal process quick and easy. One of the standout features of the OEMTOOLS 24539 is its ability to protect your vehicle’s components. It ensures no damage to the drive shaft, yokes, joints, or bearing cups during use, maintaining the integrity of your vehicle and preventing costly repairs. The tool’s design allows you to safely disassemble drivelines without the need for hammering or heating components, reducing both risk and labor time. This makes the U-joint removal process safer and faster, ideal for both professional mechanics and DIY enthusiasts. Constructed from solid steel, this U joint puller offers long-lasting durability and reliable performance. It handles tough, seized U-joint cups with ease, providing dependable service in demanding automotive repair environments. With the OEMTOOLS 24539 U Joint Puller, you can tackle U-joint removal tasks with confidence, knowing you have a tool designed for efficiency, safety, and durability. Enhance your automotive toolkit with this essential tool, and experience the difference in performance and ease of use.
MM879
September 2, 2025
I hope to not use this tool. However, I do own a 2500 Ram with +100k on the odo. The vehicle has 10 u-joints with 40 bearings. Time will tell if this tool is worth the investment.11/6/22 It didn't take long for the first u-joint to go bad. It was one of the worst, RH front knuckle. The tool would not move the u-joint without the addition of heat. The tool did work well to center the new u-joint after clip installation. It's a good tool, but you still have to use your mechanics cap.
Tuti
August 29, 2025
At first it looks like a decently built tool with a nice paint job. I used it a maximum of three times before one of the peg stands snapped off almost causing me an injury to my eye thank God for safety glasses. HOW CAN I GET IT REPLACED UNDER WARRANTY??
Tennessee
July 14, 2025
Like all tools they have there limits. I bought this to remove a 27 year old u-joint from under a truck due to not being able to remove the axle. It did the job and being able to remove this one u-joint was worth the price alone. I also removed the other u-joint from the axle that was off the truck. On the final and third u-joint the legs started to bend and stayed bent. I don't blame the tool due to the cap of the u-joint being stuck in the yoke so bad that it needed a torch to get it out. I would definitely by it again but if you use it keep a eye on it while using a torque wrench with it so you can stop it before damaging it.
Travis
June 24, 2025
I absolutely love this tool. It makes it so much fast and easier to do drive shafts now. Used it multiple times and have even let buddies borrow it and they ordered one after they used mine. 10/10 recommended
Customer
June 4, 2025
Broke on first use (second cap actually) . Junk casting. Decent design. Job was A dana 44 front axle u-joint on an 08 jeep rubicon. Not a very stuck one either. Had no problem with my old c clamp type tool. OEM Wants customer to pay shipping. Warranty card stated 1 year warranty (ive had it a couple months) while box says limited lifetime. No better than the tool worked and no better than its built i may just cut my losses. Perhaps mine was just defective but having used the tool I can't see how it could last. OEM usually makes decent stuff This was trash. I'm just out 100 bucks
Delta
May 28, 2025
The media could not be loaded.
Cameron
April 26, 2025
Worked well on 30 year old rusted u joints. As another reviewer mentioned, tighten it down with an impact or rachet and if it feels like it's bottoming out (or the impact stops turning) take a mini sledge and whack the shoulder of your driveshaft yolk a few times and the cap should work itself forward. Just be careful as the tool will usually fall off when you do this from the relieved pressure so make sure you won't drop it on anything important.Fail to do this and you'll most likely make the u joint punch a hole through it's own cap and deal with tapping that out with a socket and heat. After reading that review all of the others came free with tension and tapping with a hammer much easier
Dw
April 1, 2025
Works as it should may not hold up to commercial use but definitely a game changer second one I've bout for my truck screw stripped under heavy load but still a great product
42koolkat
March 28, 2025
Great item, removed U joint on a 2001 GMC Yukon.Soaked the U joint with penetrating oil the night before. Used a little bit of heat and then the puller. Worked like a charm, U joint was out in 2min.
JAG
February 22, 2025
I got this for my husband for Christmas.He needed this to change his U joints on his truck.
Reinhold
February 14, 2025
Perfect. Works awesome
Adam
February 11, 2025
Item is good if your on the ears of the ujoint not on the yoke of a driveshaft or axle as it tends to slip outItem broke after a couple uses. Works great on ujoints that are not locked in place due to lack of serviceIf the item didn’t break, would have given 5-stars as it is a great little tool without having to break out the press or balljoint tool
Dallin Dent
January 29, 2025
Junk. Will not work on ram 3500. It broke halfway thru trying to push the u joints out. Bent legs. Broke pieces off the cup, slips off the yoke repeatedly. Overpriced junk
Recommended Products
