Your cart is empty.
Your cart is empty.Product Description
Steady, Reliable, and Strong
The Englander Auger Motor is the perfect replacement for your wood-burning stove. This motor suits Englander, Summers Heat, and Timber Ridge pellet stove models. Simple to set up with the built-in plug n’ play 12” wire connectors.
Specs: 1 RPM, COUNTER CLOCKWISE Rotation (When Facing Shaft). 120 V, 60 HZ, 1.03 Amps. 3/8” Diameter x 1” Length Shaft. Flat Edge of Shaft for Securing with Set Collar. Wire leads measure 12” in length.
Fits Models: 25-PDV, 25-PDVC, 25-PI, 25-PAF, 25-PDVP, 55-SHP10, 55-SHP10L, 55-SHP20, 55-TRP10, 55-SHP22, 55-SHP22L, 55-TRP15, 55-TRP22, SHP25, 55-TRP2, American Heritage, American Standard, US 25-5670 * *NOTE: Correct replacement for the upper and lower auger/drive motors in the above-mentioned models.
Part Numbers: PU-047040 / B4415UI / PH-CCW1
Englander Auger Motor
Designed for reliable, high-performance operation. Check the description to ensure your fit.
Experienced
We have been in business for over 30 years, making us experts on pellet stoves and accessories. Period.
U.S.A Company
We are not fly-by-night online retailers that will be here today and gone tomorrow. We can be found in Dale, Green Bay, or Junction City, Wisconsin!
Commitment to Quality
Our products come with only the highest quality parts, which we are proud to source.
Ashton Hysell
August 31, 2025
Got it installed in just a few minutes. Very easy installation. Very quiet makes very little noise. If you want you’re stove quite I would recommend buying 2 new motors. Fit was perfect! Only issue was that it got beat up in shipping and they had to repackage it. In shipping one of the wires somehow got cut but it was easy to splice a new connector on it ( which was included) because it’s quality wire! Overall is a good choice and is much cheaper than other brands
Colin McConnell
July 25, 2025
Suspected my auger motor for my stove just not working right, it would fail to fire, timing out before a fire built, or it would die out and pellets would build in the burn pot. I took the old motor apart and it seemed to be working but for the price I decided to take a chance and order this to see if my suspicions were right. They were and the stove is working perfect again, but this is a WAYYYY better built gearmotor than the Travis / Avalon unit I bought from them 3 years ago for 3x the price. I ordered a 2nd one for backup, Maybe in 6 to 10 years I might need it. WELL worth the money!
Jitsu dad
July 14, 2025
Arrived days earlier than expected. The only issue I had was I needed to switch the leads on the motor. It took about 6 minutes to install. My stove is alive again. Definitely recommend
Wayfarer
June 6, 2025
NOISY! I bought two, and one of them is the noisiest auger motor I've ever heard! I'd have sent it back if I hadn't needed the stove back into immediate service. I'm wondering if someone forgot to put lube into the reduction gearbox? Makes a very disagreeable high-pitched whining sound (which, in all fairness, *does* abate to a degree after the stove is warmed up). Already concerned about premature failure of that one, though. The other one is just fine.I *did* have to modify the output shafts to get them to fit my stove (Englander 25-PDVC). There's a lockscrew in a collar at the rear of the stove that connects these auger motors to the actual auger shafts; with the motor seated fully in that collar, the lock screw hits the shaft right where the flat ramps back up into a round shaft, and every time I'd try to tighten the lockscrew, it would force the motor out away from the stove (out of the collar), and I couldn't get the rear cover back on without bending it. Took a dremel to the shaft and extended the flat about 3/16" and that took care of the problem. And no, it was noisy *before* I had to do that! I can't in good conscience place any blame on the auger motor for the fit issue; pellet stoves, while they all operate on the same principles more or less, tend to vary quite a bit in the details between manufacturers, and even between models of the same manufacture.Otherwise, they perform just fine. Only time will tell how long they hold up (especially that noisy one). When I first put them in, the noisy one was on the lower "always-on" auger. I switched them and put the noisy one on the upper 'intermittent on' auger, hoping to maximize the service life of the motor.
gary
May 8, 2025
As described!
Melissa Gallegos
May 2, 2025
I have an Englander stove with both an upper and lower auger. The motor to the lower auger went bad, and this replacement was an exact duplicate of the factory part. I am a retired industrial maintenance electrician/electronics technician, and I was impressed with the quality of this part for the value.I would highly recommend this part if you need a replacement.
nathan fisher
February 20, 2025
I’ve had this stove for over 10 years, runs 24-7, simple and easy to fix. Replaced many auger motors because of the use it gets. This one by far is the quietest I’ve put in. Can’t even tell it’s there. And we’ll packaged too. Good part, good price. I bought 2.
Plumcrazee
December 25, 2024
First Auger Motor ordered on October 2, 2021 and gave out a couple of weeks ago. I ordered a replacement motor and I did not check to see if original motor was covered by warranty. The original motor that came with original Pellet Stove lasted 14 years. If replacement motor ordered recently on November 13, 2024 can be covered under warranty of first motor ordered October 2, 2021, please credit my Amazon Account.
Robyn Cormier
December 12, 2024
Working great
Recommended Products
$280.05
$ 99 .00 $99.00
$132.95
$ 62 .99 $62.99
$108.90
$ 43 .99 $43.99