Your cart is empty.
Your cart is empty.RACO 6239NI 1-Gang Wood Floor Boxes in Nickel finish allows for the placement of electrical power or a combination of power and voice/data devices. Safe and recessed tamper resistant duplex receptacle allows plug to be concealed, especially for children. Complies with NEC Article 406.11. Can be used for power or data. Equipped with back and side knockouts for proper wiring access, whether for cable, plug, cord, usb, or ethernet. Protects electrical connection and prevents accidental disconnection. No unsightly plugs of different equipment on the surface of the floor as it also reduces plug protrusion. Features removable neoprene gaskets to allow for independent use of either side of the receptacle with the cover closed. Pre-assembled flange and cover for fast installation. May be installed on granite, flooring, wood, a countertop, an outdoor concrete wall, a ceiling, or by a window. Height can be adjusted after the box is mounted. Includes steel box, nickel cover and flange, nickel finish, and 15A/125V tamper resistant receptacle.
ajoris
2025-09-01 17:36:42
Great looking and stylish at a great price point. The only negative is that is almost 1/4 inch bump on a flat floor so I would recommend using it in carpeted areas
7
2025-08-31 16:41:48
Quality great modern chrome color easy installation
Robin P.
2025-08-17 11:33:37
I installed this into a hardwood floor. The nice thing about this it the box accepts any standard box receptacle, like electrical, HDMI, ethernet, usb jacks, etc. Just like in a box in a wall. I used a drill at the four corners and then a jigsaw. Worked fine. finished the various cutouts for the nuts and tabs with a chisel. Everything fit tight but well. Everything screwed in a it looks great. I used this to run a cat 7 ethernet cable through the floor into the basement to connect to a high speed router I have mounted under the steps in the approximate center of our house.It is well made. The box is mounted to the floor with four wood screws and then you mount the cover plate over this with the rubber foam seal underneath on top of that with four more wood screws that match the finish that you selected for your install. I predrilled a small hole to help make sure the screws ran straight and true. Works well. I used flat Cat 7 cable so I just ran it out under the rubber insert and it still looks good. If I need to make another floor mounted box install, I will use this if it will work with what I want to do.
Richard Davenport
2025-08-07 15:34:42
I like how well it fits and looks. The only thing that prevents me from giving the device 5 stars is that they shipped it with only two screws. Now I have to match the screws which is not easy done. It was nice not to have to go out and find all the pieces to get the job done. Except for the screws!! A note the plug of the power strip that plugged in stuck out of the slot. I also liked the locking top plate that keeps the plugs trapped.
Pashan Vossoughi
2025-07-24 14:20:08
This worked great and wasn't hard at all to install if your handy. I'm a DIY'er and I think it turned out great for our little end table.One thing to note tho, when you punch out the knockouts in the metal box, it doesn't come with any grommets to protect the electrical wiring from the metal box.
hubbycap
2025-06-26 10:40:47
I have other make floor receptacles in my home now but experience has proven them deficient in 2 ways, the item that is plugged in extends above the floor level and can be bumped and broken by furniture movement (this has happened.) Also, when entertaining we sometimes move furniture and leave the floor receptacles in the open. Though fairly well-made of machined brass, the cover plates have to be covered with their supplied silver-dollar-sized threaded inserts when not in use. These inserts are a real hassle to install/remove and we are perpetually misplacing them. Also, dirt and crumbs seem to gravitate to the plug.Comes now the Hubbell floor receptacle. First it's a duplex, accommodating 2 plugs. Next the receptacle itself is sunk deep and protects the plug below floor level. The heavy-duty steel electrical box is screw-adjustable over a range of 3/4" to accommodate flooring height or height changes for remodel work down the road. Attached rubber inserts cover an unused cord paths to keep "Cheetos" from falling in. And lastly, the cover is attached with a hinge and a sprung bearing catch that means the cover is never lost and it closes reassuringly to protect the plug with only the cord rising from the provided opening. This floor receptacle is not the plastic junk that seems to be so abundant nowadays, it is built for commercial duty and will last for decades. I would thing nothing of a chair leg resting directly on top of the Hubbell. Looks great too.
Jesse Nietzer
2025-06-22 09:34:39
This was used to replace 30+ year old outlets on a stage. The outlet is usually used under a lectern, and a narrow dc power supply fits nicely for a light (though the cover won't close with it plugged in). The closing cover does work well and stays shut when standard cords are used. The main reason we went with this model was its use of a decora style outlet. As I mentioned, we were replacing an older outlet that was a standard outlet within 2 feet of a baptistry pool. It was very easy to change out the outlet that this cover came with to a GFCI outlet to make it safer for floor use.The only downside I had was because both the outlet box and the cover need to fit into the hole, there is almost no play on the measurements if you are off. The screws that hold the box to the floor come very close to the edge of the hole so it is important to cut the hole exactly as specified.
Craving the outdoors
2025-05-23 09:17:04
Make sure you check your depth available to you. This one runs deep. Also, if you install over carpet, be aware that the surface plate may get scratched by the brushes of a vacuum in addition to the rubber stopper getting sucked up.
Miguel Avila
2025-05-03 16:18:23
Me llegó antes de lo programado, ya lo esperaba por que es un producto que necesitaba para colocar contactos en el piso y esconde muy bien las clavijas de los aparatos, lo instale en un pequeño gimnasio en la casa y no me quedan cables estorbando por el piso
Luc Hubert
2025-04-10 17:57:49
Perfect fit...
Customer
2025-03-30 15:27:13
Built solid! I really like the product but it took me a bit to figure out how they wanted it installed because there were no directions. I swapped out the outlet itself with a gfi one and it worked great. (original outlet was fine but I wanted gfi)
MC
2025-01-26 14:25:59
Muy discreto y funcional. Lo compre para una sala de TV y quedo perfecto
Steve Cossette
2025-01-19 17:42:59
Pour un divan Electrique
Recommended Products
