Your cart is empty.
Your cart is empty.Kareback 36 grit 2-3/4-inch Gold Stearate Aluminum Oxide PSA continuous rolls. 25 meters (27-1/2 Yards). Non-Loading Aluminum Oxide on C-weight paper provides and excellent finish for all applications including paints, primers & stains as well as raw wood, fiberglass, composites & metals. For use with half sheet and quarter sheet sanders. Also for hand sanding with glue to hold on sanding block (Sun gold Part Number 98847).
David
August 19, 2025
I agree with other reviewers that this is an excellent paper at an attractive price, but I've had the same problem as others with the paper adhering too strongly to my sanding block. However, I solved this by applying a light coat of wax to the block. The paper still adheres adequately, but peels off cleanly. I use an automotive cleaner/wax (sparingly, then buff lightly) and repeat occasionally as needed. It threw me at first that the grit is not printed on the back of the sandpaper, but apparently the letters DV indicate 120 grit, and EV is 220. Check the markings on the back when you open the package to make certain.
Customer
August 17, 2025
This stuff is fantastic. The first thing I tried it on was an antique plane iron I've been flogging the chips out of for years. Using an angle holding guide and ONE 16" strip on safety glass took 1/8" off a 1.5" iron in less than 100 strokes. I then had about 30 passes with a different iron and still had enough life to take 80 grit marks out of a 3/4x30" surface of spanish cedar. It didn't clog til I tried white pine (same strip), but what wouldn't?PSA did well even on cold, semi-clean surfaces. I sound like one of those joke reviews, but I honestly did not know sandpaper could be this good. There are very occasional paper separations on removal, but I bet the 3M does that too at almost 300% of the cost.
C.B.Maghielse
August 9, 2025
I have different sanding tools and this sandpaper is easy to cut to size
Green Tree
July 29, 2025
This sandpaper is not terrible but I would not give it 5 stars. I am comparing it to Norton 3x, which I absolutely love, so my rating reflects how good it is to the Norton brand which I would rate a 5. It is not quite as sharp as Norton and definitely does not last as long. The adhesive backing is not very sticky and comes loose very quickly. It starts curling up at the edges and then as sawdust creeps in and under the edges it then works it's way off shortly thereafter. Good if you are on a budget but it becomes frustrating to use after a while. Tried it once but going back to Norton.
M. Roeder
July 22, 2025
Note: There is no backing strip to protect the PSA from grit transfer. However the manufacturer seems to have dusted off the paper before they wound it into a spool and I found it to be acceptable with no grit transfer. It worked well for dry block sanding and OK for wet but the wet sanding on a block did loosen the adhesive to block contact. Keep a keen eye for paper edge roll over which can dig into your polyester filler.
Customer
June 27, 2025
clogs up too quickly
J. Duider
June 15, 2025
Its sandpaper, its sticky on the back. I used this for sharpening chisels that were in bad shape. It worked very well to clean up the big nicks, this was followed with finer grits to get a great edge.
s.w
May 19, 2025
item advertised as 25 yards but the actual product is 20 yards
titanio
April 5, 2025
Buena calidad
JohnnyB
March 28, 2025
This stuff will level out body filler in no time, lasts long, doesn’t plug up very fast
W544
February 5, 2025
I couldn't find anywhere in the description if this stuff was hook and loop or sticky back. It is sticky back. It sticks okay. It stays abrasive for much longer than other brands I have used and for whatever reason, it isn't getting clogged up with body filler. I've only been using it for a couple of days but so far I am impressed.
Arnulfo Zesati
January 1, 2025
Buen producto
Linda Orza
November 23, 2024
WORKS GOOD
Recommended Products
