Your cart is empty.
Your cart is empty.A drop pitman arm is recommended for optimum turning radius and drag Link alignment.
Luke reynolds
2025-09-03 10:29:42
Perfect fit and very durable
chris
2025-08-15 17:18:43
I installed a 2.5†spring lift and 1.25†shackles to replace a janky homemade shackle lift that the previous owner had installed (and also to replace very worn out stock springs). After the install I noticed the steering wheel was no longer straight and the steering was jerky (as if it wanted to continue left or right when I went into a curve). After reading online, and knowing my alignment wasn’t the issue; I figured out it was steering geometry that caused the issue. The stock pitman and lift kit was causing the steering to be at to steep of an angle. I installed the RC drop pitman arm last night and it seems to have cured the issue. It isn’t jerky now and drives much smoother into and through curves. Bump steer seems to be much better as well.Update March 8th 2022: so far so good. Seems to be well made and has not given any issues. The steering alignment angles are much better than before and it drives much smoother. I still occasionally have death wobble issues, but that isn’t an issue with this part. I highly recommend this part for any YJ lifted enough to effect steering angles.
Alex Dags
2025-08-11 09:49:03
worked exactly for my 2001 jeep cherokee with 3'' lift
Ruben flores
2025-08-10 13:07:45
muy buen producto y rapido en entregas
nathan kyelberg
2025-07-27 14:54:33
Had to ream the bottom hole out to install bigger tie rod ends. Ended up having to use a angle grinder to finish the ream so they would seat correctly besides that did what it needed to
Freeseabee
2025-06-14 11:35:57
If you have aftermarket tie rod ends you will have to modify the connection point.
Xtr3m3sports
2025-05-28 16:31:41
Easy install after the hell i went through taking the old one off
c anderson
2025-05-27 09:07:38
Product received was clearly installed and used. Chips in paint and wear shown where hardware was previously installed. Part will still work for my application but will need to be repainted.
James
2025-03-21 15:02:42
Excellent, will purchase directly from RC for future purchase. Customer service is outstanding 5+ Kaylan
Arturo
2025-03-09 20:19:25
Funciono y quedonperfecto
Zunoor
2025-03-08 10:32:24
Same size like stock and overpricedBetter get the stockI bought two one i am keeping incase my stock grooves got wreckedMax selling price should be 80AED
Tall guy
2025-02-24 20:06:04
Installed on my YJ with a 4.5†lift , ran it waits the stock pitman arm for two years not sure why I waited so long it’s nice to turn just as much both ways ! Ha ha
Fernando
2025-02-16 12:05:11
Buena calidad y hace su función en mi jeep tj 2001
Recommended Products
