Your cart is empty.
Your cart is empty.Product Description
3-STEP INSTALLATION
SPLINE REMOVAL HOOK
- Sharp hooks can easily hook out old splines.
- Comfortable handle effortless in use.
- Stainless steel thick shaft can be used repeatedly.
STEEL SCREEN ROLLER
- Use convex roller-press the screen into the groove.
- Use concave roller-press the spline into the groove.
SUFFICIENT SCREEN SPLINE
- 32FT length can install more screens. Diameter: 0.137in.
- Vinyl spline has high tensile strength and will not break.
- Hollow design is easy to press into the groove.
DOUBLE SIDE SCREEN ROLLER TOOL
Suitable for most grooves
- Diameter: 0.137in. Easy to enter the groove with screen roller tool.
Sufficient Vinyl Window Spline
- Spline length is 32ft. Diameter: 0.137in.
- The length of 32ft is enough to install the screen window many times.
- This spline has high tensile strength and will not break.
- Hollow design is easy to press into the groove, supply enough pressure to fix the screen.
- The spline are inserted into the spline groove of your screen frame by applying gentle pressure nice helper for installing and replacing the screens.
Removal Hook
Don't worry about aged spline anymore-Use hook to easily remove!
Hayleymayhem
August 13, 2025
My two cats destroyed my screen door. Replaced it with this and they can’t make a single scratch. Works exactly as it should. Very durable and looks much better than patches. Worth the cost. It does come folded, but the dryer trick people mentioned to take the creases out works. I put mine on low for just a few minutes and the creases were gone. It is thick, so it does make it slightly darker, but it not enough to bother me. A little hard to install on a big door, better to have a second person to help. I’m sure on a smaller window it would be easier. I’m going to replace all of my screens with this.
Frank T
July 25, 2025
I like this kit as it was inexpensive and comes with everything you need and more. I am currently rescreening my pool enclosure. I have completed over half and these tools have worked flawlessly.The roller tool itself works great. Just be careful and don't press to hard or it will cut your screen, as any roller will. It will take light to firm pressure, but not super hard.The pick helps to remove the old spline and screen from the tracks. it works very well and has helped up without bending or the tip breaking.The brush is nice so if you are rescreening, you can easily clean/remove any small pieces of the old screen, dirt, leaves or other small debris.The clips are the MVPs of rescreening. Sometimes they can be a little hard to squeeze, but they will hold the screen securely. I couldn't imagine doing this task without them.Some tricks I've learned as I've already rescreened about 250 sq/ft of my enclosure.When removing flat spline (might work for round too) once you get one end pulled out enough to get a good grip on it. Pull parallel with the track and away. This causes it slide in the track and will easily pull out of the track. When I pulled straight up it would constantly break or was harder in comparison to pulling parallel.Rescreening squares and rectangles are pretty simple and you can easily screen it wrinkle free and tight. If you are doing a panel that is a triangle, start with the angled side (non-square corners) first. It will be easier to get it tight. Save the two sides that form a right angle for last. When I did it this way I got it first time every time. When I didn't I would always have to pull spline out to pull the screen tight as wrinkles would form.
P. Chen
June 19, 2025
It has pretty much everything you need to, in my case, fix a screen.I have 2 screens that somehow came loose, the spline fell off, and the mesh was not held in place any more. The mesh was not torn, so all I have to do is to re-seat the spline. I choose this kit because it came with those clips. I was hoping the clips will hold the mesh in place so I can have a taut surface when I am done. The clips did the job fine for the first screen, but on the 2nd screen, maybe it is because the mesh has more sun exposure, it "cuts" the mesh as I forced the clip into the groove, so I cannot use it on the 2nd screen. It may not be the clip's fault as it worked fine on the first screen. Maybe the mesh is just too brittle due to sun exposure.Anyway, I am happy with the kit.
Bobby McWilliams
June 5, 2025
We use this to repair our back screendoor when the wind pushes it loose. It is an intuitive set.
Best Friends
May 24, 2025
This is a great kit tools are great quality. We find that the wheels may be a little bit too big for the RV screens and we headed cut one of the new screens we're putting in. We have used the hand tool and that has tremendously. The clips for the window are for house screen Windows and not for an RV.
Christopher Trybun
April 30, 2025
Works, but tool is cheap, wheel loose and woobling.
John L.
April 13, 2025
All you need is screen and a knife! The clips firmly hold the screen in place while you install the spline. I had to use flat spline on my enclosure, but the kit was still very handy. Everything worked smoothly and the pick digs the old spline out like a champ! Okay attention and be sure to angle the concave wheel away from the good side of the screen or you'll risk cutting your screen. I'll get good use out of this kit.
Hungry Goose
February 27, 2025
This kit works but use it with care when pushing the tubing with the concave end of the tool. It's metal and it cut the aluminum screen and made holes, the very reason I was replacing it.
J
February 17, 2025
the spline was a little thin for my window frames, but the roller made the job much easier than the cheap one I was using before, the pick tool proved useful too.
Rick W.
January 10, 2025
This ended up making a bigger mess of my screen than just doing it by hand. The edges of the wheel roller are so sharp that they cut the inside edge of the screen and now it’s unrepairable without completely replacing the screen. The only part that I found the slights bit useful was the hook tool to pull out the old spline. The clips are not the right size and they only supply a single size that obviously isn’t going to work for every screen door. Not super impressed.
Carsten Sorensen
December 26, 2024
The roller was built nice, but it was too sharp and was cutting my screen while I was securing the rubber strip in the slot.
Recommended Products
$32.56
$ 13 .99 $13.99