Your cart is empty.
Your cart is empty.Product Description
BoyoTec Thermostat Switch for Fireplace Blower Fan, Wood Stove, Snap Disc Thermal Fan Control
- "ON" AT 100℉ - Thermostat switch will turn "on" your fireplace blower fan when it reaches 120 degrees Fahrenheit (+/- 5°F).
- "OFF" AT 85℉ - Temp sensor will turn "off" your fireplace blower fan when it reaches 105 degrees Fahrenheit (+/- 5°F). This helps save power significantly.
- DURABLE: Temperature switch will last for over 100,000 operations under normal usage.
- Rated for environmental conditions up to 350°F. UL Approved up to 250 VAC and 25 AMP resistive load.
- Applicable Devices: Fireplace Fan, Woood Stove Fan, Geenhouse Cooling Fan, RV Refrigerator Cooling Fan, Solar Water Heater, Wall & Floor Furnace and a variety of Heating Equipment.
Applicable Devices
Automatic Working : The switch will "close" at 120℉ which allows power to the fan and turns it "on". When the appliance temperature drops to 105℉, the switch will "open" and stop power to the fan, shutting it "off".
Mel
2025-07-30 13:35:16
Works great
Rex Giles
2025-07-28 18:50:32
My old thermostat was 120° I replaced it with this 100 degree. Great choice. Now I can blow a little more heat from the fireplace that was being trapped when the fan shut off to soon.
jim webb
2025-07-01 10:28:25
Works as advertised. Used on a blower motor
JPerry
2025-06-26 11:09:22
For a Alderlea T5 Fireplace Insert - The 120°F ON and 105°F Off thermostat works much better for me than the original thermostat (slow to start) and the sister one that operates at lower temperatures and never seems to shut off until the stove gets totally cold. The 120°F ON and 105°F Off thermostat is a little slow to start, but faster than the original that came with the stove. Good enough for me. By the way, it is a perfect fit and is easy to replace the old thermostat with the new one.
tim harrison
2025-06-16 12:06:13
Thermostat only lasted a week
Shane R. Hart
2025-06-11 16:31:18
Price is good, but I've had to replace once a year on my wood stove heatalator.
Matt
2025-06-06 16:22:42
I switched a whitfield pellet stove to this sensor instead of the problematic eye sensor it came with. Swapped right into a blank on the exhaust and easy to wire up! Now my pellet stove stays burning!
William Bailey
2025-05-26 18:48:17
Needed one to kick in at 100° found it here and works great
Peter Krause
2025-05-10 13:02:01
A little to long on the delivery. Works as stated.
Dany Bingle
2025-04-05 17:13:00
Super pour le travail attendu de ce thermodisque recommandé
Client d'
2025-02-05 14:13:39
Parfait
non
2024-12-20 10:47:51
Ok
Den
2024-12-03 10:28:08
que je peut remplacer l'original par unproduit moin dispendieux et surement meilleur
Recommended Products
$7.19
$ 3 .99 $3.99