Shopping Cart

Your cart is empty.

Your cart is empty.

Ampulla Ultra Thick Water Resistance Garage Wall Protector, Designed in Germany - Pack of Two (6.5mm Thickness)

Free shipping on orders over $29.99

$23.99

$ 10 .99 $10.99

In Stock

About this item

  • √ Best Protection by DOUBLE Thickness - 1/4" thickness surface provides heavy protection for your car door and garage wall to prevent damage caused by any heavy impacts. It is greater or equal to twice the thickness of other brand of garage wall protectors.
  • √ Top Grade & Eco-Friendly Material - The protectors with scratch prevention diamond texture on the waterproof surface are made of odorless high-density material, which has RoHS authentication. It is totally environment-friendly material. Let us go Green!!
  • √ Full Protection & Suitable for Types of Walls - Scratch prevention soft foam strip for garages. Each strip size is 79"x 8"x 1/4". And also the strip can be cut into multi pieces or different shapes, which fits for any types of walls.
  • √ Exquisite Surface Design - Details make all the difference. This garage car door protector has been applied with the most exquisite design in the world. Any water drop or water flushing be protected by special textures and grooves. It is also very easy to be cleaned.
  • √ Double Protection by Dual Strip Pack - A set of two garage wall strip ensures both sides of car doors and garage walls will be fully protected.



Product Description

Garage

Ampulla Garage Wall Protector

Ampulla Garage Wall Protector's Features:

  • Best Protection – 1/4 inch(6.5mm) thickness resists any moderate-heavy collisions;
  • Strong Adhesive - Reinforced by fiber mesh design and strong adhesive surface;
  • Dual Strips - Provides fully protection for all the side doors of most of sedan & SUV;
  • Water Resistance - Unique design texture and special surface treatment gives a great water resistance
  • Exquisite Texture - Let the protectors designed in Germany become decoration and add more stylish to your home.
  • Anti-Scratch - Special textural surface can minimize the scratch marks on the protectors and keep it clean and tidy.

Package Included:

2 x Garage wall protector (79"x 8"x 1/4" or 2000x200x6.5mm)

(Two pieces in One Pack)

garage wall protector

Little Details Make All the Difference.

Instruction:

  1. Please clean and dry the wall surface and remove any particles on it;
  2. Peel approximate 4” (10cm) adhesive cover from one side and apply the protector on the wall
  3. Slowly peel the rest of the adhesive cover and apply the protector on the wall at the same time to make sure it is straight and no space between it.
  4. Repeat the same steps above for the other side of your garage wall.

Notice before use:

  • Please do not put under extremely high temperature or exposure to the sun for long;
  • Please clean the wall surface and remove the dust or other particles and keep dry before sticking the strips to the wall;
  • Protectors can be removed without leaving marks on the most of the surfaces (e.g. brick, tile, glass, or marble walls). But the removal on a brittle or lime wall pavement may need to do it with care, because the adhesive is very strong.

Richard B
September 4, 2025
Works well---adhesive is fine and easy to place/position. WIll have to follow for longevity/toughness.
AJ
August 16, 2025
Works great to save your walls and doors.Hold up great and easy to install.I even added it where the garland can sits. Saves my wall
Gatos4
August 9, 2025
My garage is just 10' wide, so I have to be very precise when I park my small SUV. Regardless, the walls were taking a beating, so after repairs and new paint, I applied this material to the walls to avoid further damage.The wall protector comes in two rolls and has an adhesive back. After cleaning the walls with alcohol, measuring, and marking, I cut the material to size and applied it to the walls, removing the backing paper a few inches at a time as I pressed the protector firmly to the wall. Note that the material CANNOT be removed from drywall, so you have to get it right the first time. I also applied a strip to the wall by the trash receptacles, as well as to the corners of a small desk with metal edges that I have in the guest room. So far, the material is adhering tightly, given a temperature range of 34 - 73 degrees. Time will tell how well it adheres in a wider temperature range, but so far I'm very pleased with this simple solution to avoiding wall damage.
Cynthia Bloomquist
July 19, 2025
My husband did not want to mount this directly on the plasterboard wall of our garage. Instead, he cut two pieces of thin interior construction-grade plastic material to the sizes we needed for the two doors we were concerned about, then cut strips of this to fit, attached it using the adhesive backing, and then drilled two holes in each piece, mounting them where appropriate. They work great and could easily be removed if necessary.
Kindle Customer
June 24, 2025
This is our second purchase of Ampulla garage wall protection. We have a large vehicle in a small garage so the door always bumped the wall when entering or exiting the vehicle. When I first saw the product I was disappointed in the thickness, but actually it’s perfect. It looks nice on the wall, was easy to apply and sticks well. Now we’re going to use this product again on another section and f the garage.
Frank Castillo DCP Int'l
May 28, 2025
I was doubtful about the product when I first bought it. But after installing the product inside my detached garage, that has no environmental control, I was very satisfied with how easy it was to install, and how it adheres to almost any surface. Inside the garage, on the driver's side, I installed it horizontally on a perforated panelboard, that is years old and can't be cleaned perfectly. On the passenger side I installed it vertically, attached to a 4" x 4" bare treated wood column that has also been in place for many years. Before the installation I cleaned the surfaces as best as I could with just a soaked utility towel. After the surfaces dried I installed the wall protector; it stuck like a leach! It is still perfectly in place after a week of beating by the average South Florida weather for this time of the year: >70% humidity, ±90°F and the typical afternoon Thunderstorms.
J. Hennessy
May 28, 2025
Using on garage wall to protect against car doors hitting the concrete wall. Pretty simple to use. I cut in half as my front car doors hit differently than the back car doors. Easy to cut. Then easy to peal off protective layer on back. Press to concrete and strips stay in place. Now doors have cushion to hit vs concrete. Pad is thin but enough for protection. Overall this was a great protection added.
Wayne DeJulia
May 7, 2025
Seems super strong with a sticky mesh underneath adheres to my aluminum car port poles nicely. After 2 days the edges are peeling away and I needed to use 3M black weatherstripping adhesive and cable ties to reattach. I’m in Florida but the weather was in the 60’s. I applied it to 4 car port posts and 2 are already detaching. I expected much better.I prepared surface with alcohol and vigorous cleaning
Ryan Bayliss
April 13, 2025
The media could not be loaded.
Ana Figueroa
March 20, 2025
Muy fácil de instalar, lo quería para que mi silla dejara de raspar mi pared y funcionó muy bien.
Cliente
February 4, 2025
Se adhiere fácilmente, se ve de buena calidad y cumplen con su cometido. Mi pared de la cochera tiene relieve y han pasado muchos que no han durado 2-3.semanas en levantarse y terminar en el suelo. Éste está intacto. Lo recomiendo.
Alessandro
January 21, 2025
Il prezzo non è tra i più competitivi ma devo dire che nel mio caso salva le portiere delle auto dai miei figli. La gomma è assorbente e l'altezza e lunghezza sono sufficienti per coprire sia la portiera anteriore che quella posteriore. L'adesivo aderisce bene al muro, la pellicola protettiva dell'adesivo non è immediata nel distacco ma il solo all'inizio: una volta che si distacca il primo angolo la parte restante risulta molto semplice da togliere.
SpiffyCaper
December 24, 2024
This was as easy as it comes. 5 minute, two-person installation. No issue with the adhesive backing paper (unlike others have reported) but I could see how if attempted as a one-person installation it could get very dicey.Thickness of quilted rubber is the perfect quality. Adhesive backing is VERY strong so get it right the first time. The end cuts were even and aligned nicely with the door frame.Quick delivery and for the price if I get a couple years out of it I’ll be thrilled.
Recommended Products