Your cart is empty.
Your cart is empty.Product Description
Premium Material:
- Polishing finish stainless steel allows for smooth operation and precision measurement.
Screen protector
Locking Screw
Conversion Table
Package Include:
1 x Digital Caliper
2 x Battery (one built-in, one to replace)
1 x Screwdriver
1 x Hard Plastic Case
1 x Blue packaging
Specifications:
- Measurement range: 0-150 mm / 0-6 in
- Resolution: 0.01 mm / 0.0005 inches
- Accuracy: ±0.001 inches/±0.02 mm
- Working temperature: 0°C ~ 40°C
- Material: stainless steel
- Waterproof: IP54
- Display: LCD screen
- Power:1.5v button cell
- High-quality polished stainless steel frame of knurled thumb roller and locking screw ensure smooth sliding and accurate positioning in use.
- The zero button can let you set to zero at any position,which is much convenient for every measuring moment.
- And our caliper is not only widely used in industrial but also in automotive applications, family daily measurement and office work. And it is also a great choice for DIY makers.
LK
September 4, 2025
Quality measuring device which provides consistent results that match those obtained from a second analog caliper that I own. Battery was installed upon receipt of the caliper, so it was ready to use immediately. Included two spare batteries. Easy to understand instructions included in the hardened plastic case which adequately protects the device when not in use.
Bart
August 28, 2025
Offers instant results, is accurate to my testing, and is extremely intuitive to use. I always wanted some calipers but figured they were expensive until I actually looked around. These are a great match of price and quality. I only wish I had picked these up sooner. They would have been great for some previous projects. I would absolutely recommend them!
Customer
July 10, 2025
Seems to be accurate. Only time will tell if it can maintain accuracy with use. Has difficulty measuring internal diameter for small openings (5mm and smaller).
philc
July 6, 2025
Product came with multiple batteries, and even had one already installed. Also came with a screwdriver to replace batteries. Nice features include mm or inches, great case and packaged well. Never had the need for one before but needed it fast. This one came as promise in one day. Several Amazon products recently ordered promised one day delivery (prime) and did not arrive for 2-3 days. Delayed my project as had to travel. This exceeded my expectations.
Blair S.
June 20, 2025
I needed a quick but 'accurate enough' caliper for my workshop, but on a budget. This fits the bill. It is easy to use, has both metric and standard units and seems fairly robust in its construction. The case is the basic tool case plastic common in lower tier tools but is good enough for my needs. If you aren't doing hyper-precise machining, this should fit your needs as well.
Tim
June 16, 2025
Picked this up for various uses around the shop including measuring tubing diameter, overall length, and inside diameter of bearings and bushings. Works well, seems to be very accurate, reads in metric and standard measurements, and allows for taking measurements several different ways. Measurements are marked clearly on the shaft as well as a clear digital readout.The case is a cheaper plastic case, but the interior foam holds the micrometer securely and keeps it from bouncing around inside. Mine came with a screwdriver for changing the battery and also 2 spare batteries.Mine measured a full 6.05 inches at max range.
Overkillguy
December 31, 2024
I'm a journeyman machinist, so maybe more picky than I should be. I can tell you this is a very accurate instrument, if used correctly, that is, don't expect to have an accurate measurement if you push too hard on the caliper when doing OD measurements, or have it at at even a slight angle when measuring a shoulder, or depth. I ran tests on my precision blocks, and 1, 1.5, 2.0 cylinders. It was within .0005-.001 accuracy. I didn't deduct a star but what I didn't like about this caliper is it only went up to 5.940", not 6+ inch range. I had to carefully mark the holding screw at the back, then grind a flat, then reinstall it to allow the caliper body to go back far enough to measure 6+ inches. I can do that but other users may have trouble if they're not machinists used to handling 2mm diameter threaded screws. This caliper doesn't display fractions, like others such as the Qfun seller. Not an issue for me but some may want this capability. But overall it is a nice caliper with all the numbers being large, not just the first couple numbers, then the rest of the reading has small numbers, like some calipers display. Also, the battery is easy to install, when needing replacement (they supply two, one in it, and another when needing replacing). Some calipers require a screwdriver to remove a cover.....deal breaker for me. I like the individual buttons on the front, not under the display face bezel. The dual/trio function calipers that have the on/off/zero are OK but you have to toggle through the button presses to get to what you want to do. So I give this a high mark, almost equal to my Qfun, and Acemeters, and slightly better than my $100+ Mitutoyos. Wait a second....Mitutoyos score lower? Yes. The display on mitutoyos are smaller than these or my other favorites. In odd measurement conditions, you need the largest display possible. Second, mitutoyos never turn off, unless you shut them off. If you forget and leave them on, then you need a new battery. This and my other calipers auto-turn off BUT, they keep the last setting, so you don't lose a reading or if you locked the caliper in place at a certain reading. If it shuts off, you just hit the on button and it'll display the exact reading last entered. Overall a nice unit, well worth the money.
alexandra akopova
December 20, 2024
This is a NICE caliper. It has weight to it, and feels great. I saw a cheaper option but I think the quality of this one shows. My only complaint is it doesnt have a backlight. But maybe I just havent figured it out yet.
Recommended Products