Your cart is empty.
Your cart is empty.Used to fix loose joints for model work and all types of action figures Helps increase firmness which is worn due to play or use Products suitable for the job detachable Used for increasing the firmness of model work and All types of action figures by using with joints or joints that has been worn due to playing or using it for a while Can be used with plastic, rubber, wood, metal, resin, etc. When it's dry will look like hard rubber can hit water high security not sticky Instructions: 1. Apply the solution evenly throughout the joints. 2. Do not add too much liquid. 3. Leave it for about 1-2 hours. 4. Test to see if the density meets your needs. 5. Can be applied repeatedly in the same area If the joints are not tight enough. 6. The product is a brush head type. Suitable for disassembly models 7. Suitable for figures that can be taken apart.
Bill Gonzalez
August 9, 2025
This solution works really well on my action figures. My S.H.Figuarts Anakin had really loose joints and he was a $100 dollar figure but this fixed his loose joints. Highly recommend!
Dung
July 22, 2025
This little thing works absolute wonders! I used it to hopefully fix up a VERY loose Marvel Legends Polaris I got from eBay and couldn't be happier with the results! It dries very quickly but if you're worried, just watch a quick half hour show while you wait for it to dry. It does dry clear so there's no residue afterwards. Also be aware that you only need a LITTLE bit of the liquid and to fully rotate/articulate the action figure part for it to really get into the little spaces. Worth your money and will last a while despite it's small size.
Jr
June 23, 2025
So I was initially looking for kiki's joint tightener, but couldnt find it and this popped up instead. So i hesitated to buy it since I couldn't find anything about it, but went ahead and said "bah, let's try it out". So when it came, I first tried it out on magneto, but i accdently added to much. Then I tried it out on my cyborg superman whose leg was a bit too close to floppy and smooth than it was to tight and smooth. So I added a little drop and coated it around the peg and then waited.After around 30min, it was no longer floppy, but it was tight and still smooth. I could hold him by his leg and shake him like I used to and he wouldn't flop, but he'd be solid and hold his pose.Though a little side not, the liquid seems to leave like some white residue after drying. Its probably like watered down glue, but it doesnt act like floor polish from my experience. I tried some stuff I bought from lowes, and it did nothing for my figures except make them worse.So TLDR, it works well for joint tightening. Just don't add too much at once.
Shawn Pelayo
June 21, 2025
I use this for my WWE/AEW figures. After about 2 months of usage some notes:Works GREAT for loose joints (arms, legs, waist)Takes about 24hrs to fully harden and see full results.Will spread depending on the paint applied on (black tights will cause a blue-colored liquid), DOES NOT STAIN**Durable, will stay on and the difference is noticeable. WILL SHED BUT NOT BADOverall, 4/5. Would like a quicker result. Perfect for collectors.
T. Carpenter
April 27, 2025
Hearken unto me, noble patrons, for I bring glad tidings of a wondrous alchemical discovery! In my hand, I hold a vial—small in stature, yet mighty in its effects. This miraculous elixir has proven itself to be a boon to our cherished artifacts, particularly those with hinges, joints, and delicate mechanisms so often ravaged by the cruel hand of time.I have tested its powers upon the our treasured figurines and miniature hinges, and lo, the results are nothing short of sorcery! The viscosity of this potion is naught but perfection, flowing with precision to fortify even the frailest joints without excess or waste. It grants renewed strength to that which had grown weak, ensuring steadfast motion where before there was only frailty.Yet a word of caution for my people: the dispensing needle, though a marvel of ingenuity, demands vigilance. It must be kept secured within the sacred tape affixed to the side of the vial, for neglect allows it to clog as though enchanted by a mischief-loving spirit. Each time it rests for more than a few hours, a purging ritual is required to restore its function. A minor nuisance, I assure you, when compared to the transformative powers it bestows.Thus, I declare this elixir a treasure of the realm—a weapon in our fight against loose joints and failing mechanisms! Let all who cherish their miniature works and delicate hinges seek out this marvel, for it is worth its weight in gold. May your artifacts stand firm and true, restored by this alchemical wonder!Go forth, my people, and let no joint falter under your watchful care!
Matt Stryker
February 10, 2025
Weak joints work like they should now. So far, no problems. Doesn't seem to harden up like super glue.
Jose
January 30, 2025
Very useful for action figure collectors! Totally recommended
Bisket
December 28, 2024
A must for any collector that has figures with loose joints. The applicators is great and precise and as long as you follow the directions it really works! It saved a handful of my figures that were pretty loose and wanky. Great buy!
Recommended Products
