Shopping Cart

Your cart is empty.

Your cart is empty.

K&N Cold Air Intake Kit: Increase Acceleration & Engine Growl, Guaranteed to Increase Horsepower up to 8HP: Compatible with 2.0L, L4, 2019-2021 TOYOTA Corolla; 2019 TOYOTA Corolla Hatchback, 69-8758TS

Free shipping on orders over $29.99

$299.99

$ 99 .00 $99.00

In Stock

About this item

  • ULTIMATE LONGEVITY: 10-Year/Million Mile Limited Warranty protects for the life of your vehicle.
  • GUARANTEED INCREASE IN HORSEPOWER: Dyno-tested with up to 50% more airflow than restrictive factory box air filter and intake tube
  • BETTER TOWING: Improves acceleration and uphill performance when towing by improving throttle response.
  • IMPROVED ENGINE SOUND: Hear the power under the hood.
  • WORLD CLASS PROTECTION: Pushing the limits of engine protection by protecting your engine from harmful contaminants
  • EASY MAINTENANCE: No filter cleaning required for up to 100,000 miles
  • EASY TO INSTALL: Bolt-on power in less than an hour with basic hand tools. K&N air intake systems are one of the easiest ways to guarantee an increase in horsepower.
  • DYNO TESTED: Dyno-tested for a guaranteed increase in horsepower and acceleration with no ECU tune required
  • HIGH QUALITY: Made in America.


K&N is the inventor of the Air Intake System and has over 50 years of experience in the performance filtration industry. Proudly designed and manufactured in the USA, this premium cold air intake system is specifically designed for your vehicle and is dyno-tested to provide a guaranteed increase in horsepower. It features a high-flow intake tube, custom heat shield, and oversized K&N Washable High-Flow Cotton Air Filter for ultimate airflow. This intake system replaces the restrictive OEM air box to provide an improved driving experience for daily driving or towing. It installs easily in about 60 minutes and is backed by a No-Hassle Lifetime Limited Warranty and will not void your factory warranty. Not legal for sale or use in California on any pollution controlled motor vehicle.

Compatible Vehicles:

  • 2020-2024 TOYOTA Corolla
  • 2019 TOYOTA Corolla Hatchback
  • 2019 TOYOTA Corolla Sedan

Daniel T.
2025-08-30 16:15:15
Absolutely love the noise thing makes compared to the Takeda Momentum intake I had before. Everything goes together well. Just make sure to tighten, not too much, the PCV connector piece to the intake pipe. Only part that was a little off.
Dav3
2025-08-19 17:06:06
For $400 you cannot go wrong!If you drive a 6-speed then you’re in for a treat. The difference in responsiveness from the engine and the way shifting is so much smoother is amazing!The noise is definitely there. It sounds good. There’s a subtle “swift sound” kinda like a turbo when you give it gas, when it sucks the air in.I paired this mod with a cat-back exhaust, (apexi n1 dual tip) very nice, no drone.On top of that I get 36 MPG on the highway!
Marco A. Nunez Aguirre
2025-07-22 16:45:21
Easy to install? Maybe... fit the stock pipe that goes at the botton is not as easy as the manufacturer claim. After that those acceleration increased and better engine sound that the manufacturer claim will be only in your dreams.The stock sound of the corolla is more way better than the sound with this expensive piece, so if you are looking a better engine sound, just try with a cheaper option... And if you want a better performance, find another way... This is just a waste of time and money.And if you are outside USA and try to return this item because the Amazon Return Policy give you an hope that you can do that? just run away right now because that Return Policy of amazon is just smoke... They tell you that you must pay the shipping and at the end they will return only just $20 to cover the shipping cost knowing that an international shipping cost for something like this would cost almost the cost of the product per se...
Joshua Hodgdon
2025-07-20 10:28:12
Kit and instructions were straightforward. Took maybe 25-30 minutes. This is on a 6mt Corolla and man does it sound good! Pure valve train music 🎶
StevenMC 19
2025-06-20 18:59:11
First, pictures. The instructions called for a cushion clamp to be installed directly onto the pipe. There was no screwhole welded on mine. So i did the next best thing and tightened it under one of the hose clamps. Still does the job. Potential for it to wiggle out with enough vibration of course, so not entirely happy about that.Other than that though, there is definitely a better noise. The car going into 2nd and beyond sounds deeper, more aggressive. Install was easy and smooth, and no errors reported. I'll monitor fuel usage as time goes. As far as a boost is concerned, I think people are getting a placebo effect, or they're very very sensitive to the change, because ~5hp isn't going to do a lot, and I can attest to that with first hand experience. That being said, throttle response is noticeably quicker.
andres
2025-05-29 11:13:12
Product was a good purchase. Love the sound and the increase of HP. Nothing crazy just a little boost for a daily drive. Installation was straight forward.
Joseph Chang
2025-05-20 15:27:10
Great intake over all, sounds very aggressive I would but it again. Due to the metal intake tubing this intake will have significantly higher idle temperature than stock but you can hardly notice it.
User
2025-05-06 12:37:47
I have purchased many cheaper / eBay intakes in the past and never really had an issue. Now that I am older/ little more established, I decided to buy a name brand/higher end intake from K & N. This is my first experience with them and this is what I get. The NPT fitting only makes it into the aluminum pipe 2-3 turns. It doesn’t come close to even halfway, nevermind flush. I’m an engineer who deals with NPT fittings on a daily basis and this just isn’t correct. If I tighten this anymore, it will surely snap. Poor quality for such a pricey product from K&N. Very disappointed and haven’t heard back from customer service despite reaching out to various departments multiple times.
Jesus cortes
2025-05-01 15:48:16
Da un toque deportivo a la bahía del motor y el sonido que emite es increíble, es rápido de instalar por mucho me tomo 30 minutos desde quitar el original y poner el K&N.
Darrell Carter
2025-04-21 13:57:34
Was bought for my son’s car he loves the look of itInstalled with no issues
Stephen Hewitt
2025-02-15 13:42:30
Looks great. Sounds awesome at 3000-4000rpm. Straightforward install. Very happy with my purchase. Fits Corolla hatchback.
Abraham Arturo Meza Marin
2025-01-27 12:29:03
Me animé a pedirlo para mi Corolla SE 2020, motor 2.0, entiendo no es compatible con la version 1.8 lts.Trae todo lo necesario para instalarse, trae el escudo térmico qué a su vez es la base sobre la cual descansa el intake, dos uniones de goma, filtro, tornilleria, abrazaderas, empaque de hule, literal, no necesitas nada adicional, eso si, considero que es mejor ir con un mecánico de confianza y profesional. Este filtro es más que nada un aditamento estético, realmente no esperen la súper velocidad adicional, no es tan perceptible, lo que si deben esperar es abrir el cofre y encontrar un motor mas bello, look deportivo y robusto.Ahora la parte más importante es... El sonido, nada que ver con el original, si bien no estaba mal al pisar el pedal a fondo en modo sport, ahora si suena como coche de carreras, no necesitas ir rápido para notarlo, realmente si me sacó de onda al inicio porque si suena muy distinto, te da la impresión que te van a voltear a ver preguntando por qué suena así, pero te acostumbras, creo que vale la pena, vuelve más divertido el carro, le da un look y nueva vox bastante robusta, vale la pena cada peso y bueno apenas lo instalaron y ningún sensor se ha prendido.
Jonathan Simard
2025-01-26 19:08:45
Seller sold me the air intake with a cracked/damaged intake pipe, will not be buying from this seller in the futur!!